This package includes the audio drivers for Avila SoC Audio
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33682 3c298f89-4303-0410-b956-a3cf2f4a3e73
The ixp4xx HSS firmware is needed in order to use the HSS (synchronous serial
port). An example of where this is used is the Gateworks Avila boards to
interface to an audio codec.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33680 3c298f89-4303-0410-b956-a3cf2f4a3e73
The autoload directives were using wrong module names, preventing
them from being automatically inserted at boot time.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33676 3c298f89-4303-0410-b956-a3cf2f4a3e73
If junk data is received during SSL_accept(), cyassl will treat it as legacy SSLv2
record without performing further plausibility checks. Change the legacy code path
to return UNKNOWN_HANDSHAKE_TYPE if the value of the third byte isn't 0x01 the
hello message type.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33675 3c298f89-4303-0410-b956-a3cf2f4a3e73
The firmware from linux-firmware does not support the rev 17 core found
in a bcm4716. The firmware extracted from the proprietary driver
supports this core. Use this firmware instead by default.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33669 3c298f89-4303-0410-b956-a3cf2f4a3e73
Move the b43-tools build from the mac80211 Makefile into an own package in tools and use the newest version of b43-tools.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33668 3c298f89-4303-0410-b956-a3cf2f4a3e73
Use the image tag header from the kernel instead of an external header
file.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33654 3c298f89-4303-0410-b956-a3cf2f4a3e73
The prototype of conf_tx and tx in struct ieee80211_ops changed some
time ago and was not compatible with the prototype assumes by
acs-mac80211.
At least I do not see any compile warnings about this any more.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33624 3c298f89-4303-0410-b956-a3cf2f4a3e73
Reviewing what went into wireless-testing I found a quite nasty mistake,
probably a result of copy&past'ing from the lines below in rt2800lib.c.
This adds another patch to fix that.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33616 3c298f89-4303-0410-b956-a3cf2f4a3e73
The original patch was accepted into linux-next in a slightly modified form.
In order to provide integrity to follow-up patches, replace the patch in OpenWrt
with the (semantically identical) now upstream patch.
(commit 03839951515b0ea2b21d649b1fe7b63f9817d0c8 in wireless-testing)
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33615 3c298f89-4303-0410-b956-a3cf2f4a3e73
On a lightly loaded 24Kc, as measured by 'openssl speed sha1', shows between
27% and 120% speedup depending on block size.
SHA1 is notably used in Transmission for piece verification.
Patch by Catalin Patulea
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33531 3c298f89-4303-0410-b956-a3cf2f4a3e73