florian
078aa440fd
[ar7] free memory below kernel offset
...
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:00 +00:00
jow
f1ba8dbbc9
x86/generic: don't disable usbfs ( #12452 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 23:28:58 +00:00
jogo
795c0046ce
bcm63xx: fix compilation with kmod-ohci enabled with 3.6
...
Fixes the following error:
drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 22:10:47 +00:00
jogo
7edabb16a1
bcm63xx: add two missing usb patches to 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 19:59:16 +00:00
jogo
68248250aa
bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 19:59:07 +00:00
kaloz
42fc31c396
cns3xxx: clean up pcie patches
...
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 21:37:54 +00:00
blogic
50d37a89fe
[lantiq] add more profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:58 +00:00
blogic
03110d670c
[lantiq] a few more dts files (WIP)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:43 +00:00
blogic
b6713eceb3
[lantiq] add mtd split and atm patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:30 +00:00
nbd
9f30d0c6bb
x86: use $(strip) for the at_keyboard check
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 10:53:36 +00:00
nbd
81d8280c93
x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 10:19:51 +00:00
juhosg
7b9dfebde4
generic: sanitize deps_initramfs list
...
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:
/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns. Stop.
make[5]: *** [usr] Error 2
Fix it by removing such filenames from the
deps_initramfs list.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 09:07:29 +00:00
luka
a8e4ddd6db
cns3xxx: exit from laguna late_initcall if not running on laguna board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 11:31:56 +00:00
kaloz
42954b7559
cns3xxx: add PPS support for laguna
...
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support. This patch adds kernel support (statically) and adds
the platform data in laguna board support.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 05:42:31 +00:00
kaloz
909210ca4e
[cns3xxx]: fixup symbol selection
...
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 05:40:34 +00:00
luka
1a061108bc
cns3xxx: fix coding style in board script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 23:12:06 +00:00
blogic
9601fbbb43
[ramips] adds fon20n profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:31 +00:00
blogic
a7d3fc489a
ramips: use kernel 3.6.6
...
## Booting image at 80800000 ...
Image Name: MIPS OpenWrt Linux-3.6.6
Created: 2012-11-06 14:19:54 UTC
System Control Status = 0x20440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 3560768 Bytes = 3.4 MB
Load Address: 80000000
Entry Point: 80000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32
Starting kernel ...
[ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain ) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=0000c388
[ 0.000000] Readback ErrCtl register=0000c388
[ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:48
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.100000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] MIPS: machine is Allnet ALL0239-3G
[ 0.140000] bio: create slab <bio-0> at 0
[ 0.150000] Switching to clocksource MIPS
[ 0.160000] NET: Registered protocol family 2
[ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.210000] TCP: reno registered
[ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.240000] NET: Registered protocol family 1
[ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 5.490000] msgmni has been set to 52
[ 5.500000] io scheduler noop registered
[ 5.510000] io scheduler deadline registered (default)
[ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[ 5.560000] physmap platform flash device: 00800000 at bf000000
[ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[ 5.610000] Amd/Fujitsu Extended Query version 1.3.
[ 5.620000] number of CFI chips: 1
[ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[ 5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[ 5.650000] 0x000000000000-0x000000030000 : "u-boot"
[ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 5.680000] 0x000000040000-0x000000050000 : "factory"
[ 5.690000] 0x000000050000-0x000000130000 : "kernel"
[ 5.700000] 0x000000130000-0x000000800000 : "rootfs"
[ 5.710000] mtd: partition "rootfs" set to be root filesystem
[ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[ 5.740000] 0x000000050000-0x000000800000 : "firmware"
[ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[ 5.780000] TCP: cubic registered
[ 5.780000] NET: Registered protocol family 17
[ 5.790000] 8021q: 802.1Q VLAN Support v1.8
[ 5.820000] Freeing unused kernel memory: 2676k freed
[ 6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -
Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 10.170000] Backport based on wireless-testing.git master-2012-09-07
[ 10.180000] compat.git: wireless-testing.git
[ 10.210000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.230000] cfg80211: World regulatory domain updated:
[ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.430000] NET: Registered protocol family 10
[ 10.760000] PPP generic driver version 2.4.2
[ 10.820000] l2tp_core: L2TP core driver, V2.0
[ 10.840000] l2tp_netlink: L2TP netlink interface
[ 10.870000] sit: IPv6 over IPv4 tunneling driver
[ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.060000] NET: Registered protocol family 24
[ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.510000] device eth0.1 entered promiscuous mode
[ 14.520000] device eth0 entered promiscuous mode
[ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 14.550000] br-lan: port 1(eth0.1) entered forwarding state
[ 14.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33
BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r34079)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/#
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:21 +00:00
blogic
4812414648
ramips: add HAVE_CLK to Kconfig on all ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:04 +00:00
blogic
814d56421b
ramips: add linux-3.6 configuration for ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/rt288x/config-3.6
create mode 100644 target/linux/ramips/rt305x/config-3.6
create mode 100644 target/linux/ramips/rt3883/config-3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:25:55 +00:00
blogic
d3e1822b67
ramips: port patches to linux-3.6
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:25:34 +00:00
jogo
d336a61384
bcm63xx: Enable endian check support for ath9k pci fixup.
...
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 09:01:03 +00:00
kaloz
61c919373e
[ixp4xx]: fixup typos in the compex patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 07:51:24 +00:00
jogo
e1696ca671
linux: export bcm963xx_tag.h to userspace
...
Export bcm963xx_tag.h so mtd can use it without using kernel includes.
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
from original location, refresh patches, use a more matching patch
number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 15:21:46 +00:00
luka
1cce3e937d
cns3xxx: refresh kernel config file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 11:16:43 +00:00
luka
e0dd91dd95
cns3xxx: use files directory
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 11:16:41 +00:00
blogic
eb5c7edbb6
[lantiq] add OWRTDTB marker patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 10:39:43 +00:00
blogic
d33fedaf9c
[lantiq] add support for arv7525
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 07:38:24 +00:00
kaloz
019f172430
[cns3xxx]: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 05:45:12 +00:00
kaloz
5a8ee8ba9f
[cns3xxx]: add default packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 05:39:08 +00:00
jogo
ab0f1978a2
linux: generic: fix split_squashfs for 3.6
...
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 00:48:21 +00:00
jogo
efe94bf411
bcm63xx: fix SPW303V images
...
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 22:50:29 +00:00
juhosg
c35ed1c477
ar71xx: nuke ath79_set_usb_power_gpio helper
...
It is no longer used.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:23:28 +00:00
juhosg
5758d2a8ee
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:23:27 +00:00
juhosg
b4e8cdb713
kernel: update linux 3.6 to 3.6.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:22:09 +00:00
kaloz
cbab54a0a7
[ixp4xx]: use the mainline machname for the compex boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 11:38:23 +00:00
juhosg
63e3e838a1
ramips: enable USB power on the DIR-645
...
Closes #12422 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 11:04:45 +00:00
juhosg
7692f8ee59
linux/3.3: backport an upstream GPIO patch
...
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().
This will be used by ar71xx/ramips platforms.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 11:04:43 +00:00
juhosg
0379541133
ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 06:58:53 +00:00
juhosg
fcc9edafeb
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
...
According to #12421 , GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.
If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 22:08:54 +00:00
juhosg
4cded31fbd
ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 21:12:20 +00:00
juhosg
8ca4e9217f
ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
...
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 20:15:18 +00:00
nbd
de6ad2505c
linux-3.6: fix portability of some includes files in tools/ used on the host
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 17:01:15 +00:00
blogic
be00679e41
[lantiq] 3.6 is not the default yet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-03 13:29:44 +00:00
blogic
8e4aa59fa5
[lantiq] adds dts files and make devicetree images buildable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:47 +00:00
blogic
a3900eb37f
[lantiq] update ase target for 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:41 +00:00
blogic
0681421b1a
[lantiq] add subtarget, as of 3.6 we dont seperate xway SoC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:36 +00:00
blogic
4f2c17075b
[lantiq] adds 3.6 files, patches and config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:26 +00:00
blogic
1048c7b452
[lantiq] move files/ -> files-3.3/
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:02 +00:00
blogic
961508b717
[lantiq] prepare Makefile for 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:06:51 +00:00