The CFE of the WRT54G3GV2 expects two firmware images, if one of them
produces a CRC error (which is the case after you installed OpenWrt, as
there is no second image), it writes one of three consecutive bytes to
the flash. (Look for "Image Status : IMG2_BAD" during boot.)
After the third boot with a CRC error, it stops and waits for a new
firmware image. To prevent this 'noset_try_flag' must be set to 1 on boot.
Tested with my own box.
Signed-off-by: Niclas Koeser <nks at informatik.uni-kiel.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23007 3c298f89-4303-0410-b956-a3cf2f4a3e73
This fixup was introduced in r11812 to correct settings for devices only showing 16MB RAM instead of 128MB.
That killed devices with 128MB RAM.
Now value is *set* 0x0009 and not ored.
The value is only corrected if it has less than 32 MB Ram.
This should fix the last problem in #3177
Thank you b.sander for the patch.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21497 3c298f89-4303-0410-b956-a3cf2f4a3e73
