1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 20:38:57 +02:00
Commit Graph

784 Commits

Author SHA1 Message Date
kyak
be5d8eda3e Disable syslogd and klogd 2011-07-01 13:24:59 +04:00
jow
63ef78f3da [toolchain] add gfortran compiler support (#9600, patch from Xiangfu Liu via Qi hardware)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-23 11:46:24 +00:00
jow
ada8f6b917 [package] base-files: assume a default ipv6 prefix size of /64, thats what the majority of users mean when they just specify an ip address
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09 12:36:30 +00:00
jow
00938663e2 [package] base-files: if an ip6addr without a prefix is given, assume /128 - otherwise the busybox utilities will interpret it as /0 and create an invalid default route
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09 12:25:48 +00:00
jow
83f0561da1 [package] base-files: fix error reporting for unsupported protocols on virtual interfaces
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-07 23:25:43 +00:00
nbd
7c8a20940f base-files: do not write to /etc/config/wireless at boot time unless a new interface was found
eliminates unnecessary flash write cycles at every boot

patch by Peter Wagner (tripolar)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-07 17:00:43 +00:00
nbd
5ba8c47f86 base-files: make the MAC address of bridge interfaces sticky to avoid ARP issues on wifi re-configuration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-24 09:31:37 +00:00
jow
f11fc7ea74 [package] base-files: mark /etc/crontabs/ as config directory
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-24 09:27:23 +00:00
jow
5d2766e7eb [PATCH] ipcalc.sh CIDR notation
Hi,

the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:

# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11

with this patch you can also execute it with:

sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11

The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.

Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.

Regards, Manuel


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-18 09:50:06 +00:00
jow
6f14855dac [package] base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 10:25:58 +00:00
juhosg
fa0e25197e base-files: fix a typo in etc/banner
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 09:23:33 +00:00
jow
8ade1960dd [package] base-files: cleanup permissions of device files in common hotplug rules (#9211)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03 19:37:59 +00:00
jow
5f715e00db [package] base-files: fix stale space in eglibc library install section (#9270)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-19 13:18:39 +00:00
jow
cd427d04f0 base-files: return success on lib-copying with external toolchain
when using an external toolchain the base-files package copies libc, libgcc and
others from the library directory.

The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"

Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.

Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.

--- Message Snippet ---
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libnss_files.so.*': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libresolv-*.so': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libresolv.so.*': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libuClibc.so.*': No such file or directory
make[2]: *** [/home/user/Desktop/code/meetwise/openwrt/bin/at91/packages/libc_-68_at91.ipk] Error 1
make[2]: Leaving directory `/home/user/Desktop/code/meetwise/openwrt/package/base-files'
make[1]: *** [package/base-files/compile] Error 2
make[1]: Leaving directory `/home/user/Desktop/code/meetwise/openwrt'
make: *** [package/base-files/compile] Error 2
--- /Message Snippet/ ---

To fix this unwanted behaviour I added an extra 'exit 0' to each for-loop and
make ignores non-existing files as before.

Signed-off-by: Sven Bachmann <dev@mcbachmann.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 20:37:43 +00:00
acinonyx
f6d755eda4 [package] base-files: Use -h instead of deprecated -L for symlink check
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-05 15:09:43 +00:00
acinonyx
fdf5c18152 [package] base-files: fix minor problem in init.d/boot
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.

Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26483 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-05 15:09:32 +00:00
cshore
198ea09e92 [package] block-mount base-files: Added additional check to pi_include to ensure that a directory used with pi_include actually contains files matching the souring pattern because if not the shell dies due to an empty string in for statement. Added /lib/functions/fsck as an empty dir to block-mount. This combination fixes a warning which generates a lot of bug reports, without panicking the kernel like the last attempt.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-05 12:12:57 +00:00
nbd
8d65fda8a8 base-files: bridge config, avoid having a random ipv6 ll address
So far, we are setting the bridge interface up before having added any
bridge interface ports. This results in the bridge assigning a random
mac address to its bridge interface and therefore IPv6 assigning a
matching link local address to the bridge interface as soon as the
bridge interface is up. After adding the first bridge port interface,
the bridge's mac address is reset correctly, however the IPv6 link
local address stays the same.

This commit ensures that we are at least having the IPv6 link local
address of the first interface added to the bridge instead of a random
one.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26426 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-03 01:23:45 +00:00
jow
46dd8a523b [package] base-files: properly handle vlans on top of wireless interfaces
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-18 18:24:51 +00:00
nbd
db0a51c50a base-files: overlayfs whiteouts depend on a specific xattr entry, which does not get preserved by the tmpfs->overlay copy. work around this by cleaning all copied "(overlay-whiteout)" symlinks after the switch to jffs2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-17 19:09:43 +00:00
nbd
ac2c331815 base-files: add initial support for mounting overlayfs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-17 19:09:39 +00:00
jow
9f59a573f4 [package] base-files: update sysctl.conf for modern kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-17 15:35:41 +00:00
acinonyx
898495ff41 [package] base-files: Autodetect newly added wireless hardware
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-15 00:44:15 +00:00
nbd
ba16e1040b base-files: link libpthread against libc
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-14 19:27:45 +00:00
nbd
6c70430aed base-files: add a default /etc/services files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13 19:47:42 +00:00
nbd
39ab13caff base-files: add users ftp (for ftp servers), network (network related daemons such as tor, quagga, ...)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13 19:10:28 +00:00
nbd
55291327c3 base-files: add an ftp group as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13 19:04:32 +00:00
nbd
2e230262d0 base-files: add a few default groups to /etc/group so that we can get rid of a few postinst scripts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13 18:56:34 +00:00
nbd
0645951452 base-files: make library relinking uclibc specific and fix libpthread installation for the non-relinked variant
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-10 12:27:46 +00:00
nbd
fc968f9ae4 base-files: only relink libraries if the linaro toolchain is selected
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-09 20:36:29 +00:00
nbd
0e2d55e3e3 gcc: move the optimized assembler helpers back into the static libgcc and skip relinking for this arch. due to relocation constraints, the assembler functions cannot be in the shared libgcc and must always be linked in statically
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-08 13:10:11 +00:00
nbd
9ad0be1cd3 base-files: the relinked libpthread needs to be linked against libdl, otherwise calls to dlopen() fail (fixes #8978)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-08 12:48:36 +00:00
nbd
9135a7a4fa base-files: fix Build/Compile override handling, fixes ar7 compile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-06 22:36:42 +00:00
nbd
e34751cb82 base-files: do not build or use libgcc on m68k and avr32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-03 14:50:00 +00:00
nbd
d082297902 base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc
saves a few kb and gets rid of unused not exported functions as well
should also improve the reliability of mklibs

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-01 05:40:38 +00:00
jow
13bfc6e1cf [package] base-files: fix sysctl handling, do not react on fake ifaces in route hotplug handler
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-25 22:44:37 +00:00
mb
4dbef44bbe boot.sh: Tabs are used for indent. Also use tabs in jffs2_ready()
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 22:40:47 +00:00
mb
ec5075b896 base-files: Add "-o noatime" to mount wrapper
noatime is cheaper than default relatime.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 22:39:08 +00:00
mb
817b05d3d3 Fix whitespace
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25632 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 21:25:45 +00:00
hcg
9c5c489cfe [package] base-files: Add /etc/nsswitch.conf to targets running glibc/eglibc, otherwise name resolution fails
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-18 10:37:26 +00:00
nbd
cac91fedd5 base-files: librt should depend on libpthread, not the other way around
In uClibc 0.9.32 as well as recent versions of glibc and eglibc, librt
depends on libpthread.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-16 02:42:24 +00:00
nbd
9ba2318fc7 base-files: remove a stale reference to /usr/lib/common.awk (thx, swalker)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-13 19:06:20 +00:00
kaloz
d37749f1ac it's time for some attitude adjustment ;)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25514 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-13 11:20:09 +00:00
nbd
5374218107 remove the shared object stubs of libnsl and libresolv - let the compiler use the static variants instead
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-13 03:26:10 +00:00
nbd
1c53c80400 base-files: /usr/lib/common.awk is only used by /bin/ipcalc.sh, move the code there
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-13 01:44:57 +00:00
jow
e662ecd9ca [package] base-files: remove ptbtime3 rdate server, its dead
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-12 17:54:01 +00:00
jow
6e12beb80b [package] base-files: update rdate server list
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-12 17:46:36 +00:00
jow
b543bf484a [package] base-file: cleanup ipv6 enabling in unbridge
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-12 16:14:15 +00:00
jow
370e79ea76 [package] base-files:
- properly disable IPv6 on bridge ports
	- introduce accept_ra option, defaults to true for dhcp interfaces, false for others
	- introduce send_rs option, defaults to true for static interfaces, false for others


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-11 00:39:11 +00:00
jow
f79493eb95 [package] base-files: derive lease_acquired dhcp state var from /proc/uptime
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-10 20:05:05 +00:00