qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-18 04:17:09 +02:00
Code
22,494 Commits 13 Branches 0 Tags 117 MiB
1863b32a32
Commit Graph

22494 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
blogic
f1215ac7aa [lantiq] fix compile error in previous commit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 19:07:05 +00:00
blogic
61b8a7cdc6 [lantiq] Support booting the Speedport W502V using BRN-BOOT. 
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:48:04 +00:00
blogic
cefea1a955 [pjsip] drop obselete Config.in file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:48:01 +00:00
juhosg
d54a0c39e1 ramips: extract eeprom for the PCIe wlan module on the RT-N56U 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:45 +00:00
juhosg
073aa05f36 ramips: rt3883: enable PCI on the RT-N56U board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:44 +00:00
juhosg
0dad89e259 ramips: rt3883: add PCI support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:42 +00:00
juhosg
34acde8e5f ramips: rt3883: sync 2.6.39 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:41 +00:00
juhosg
5775cc2b9c ramips: use SoC specific irq.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:40 +00:00
blogic
13595a7a28 [lantiq] fixes irq locking in ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 15:05:58 +00:00
blogic
d4d4e1aa21 [lantiq] fixes gpio_export patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 15:05:57 +00:00
blogic
059d9f49a5 [pjsip] bump to 1.12, merge improved lantiq aud_dev driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30520 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 15:05:55 +00:00
blogic
decfe8e3f5 [lantiq] add a simple sip client 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30519 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 15:05:52 +00:00
blogic
f8d8046b51 [ltq-dsl] add annex selection support to ltq_dsl package 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 15:05:49 +00:00
juhosg
3c97dc485a ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 17:11:58 +00:00
juhosg
a433c026e5 ar71xx: add model detection for TL-WR842N/ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 17:11:57 +00:00
hcg
c972a4ddbe [package] hostapd: correctly pass 64 char hex PSK to wpa_supplicant 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30504 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 16:07:53 +00:00
florian
8ac28fce23 [malta] update to 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30503 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 16:05:30 +00:00
florian
3e65a7b3dd [ar7] fix titan gpio register size 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30502 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 16:05:27 +00:00
nbd
f86677c02e block-mount: do not auto-mount anonymous mtdblock devices (fixes #10960, #10850) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30501 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:31:31 +00:00
nbd
ae888d8dfb quilt: add a NO_RECONFIGURE override for compiling a package without re-running Build/Configure 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30500 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:31:28 +00:00
juhosg
e95d1bebf7 ramips: rt3883: update package list in the default profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30499 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:18:05 +00:00
juhosg
2223374185 ramips: add preliminary support for the Asus RT-N56U board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:18:04 +00:00
juhosg
10a983eea1 ramips: raeth: enable MDIO code for RT3883 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30497 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:18:03 +00:00
juhosg
f835afb5d9 package/modules: enable ECHI/OHCI for RT3883 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30496 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:18:01 +00:00
juhosg
07c8d27309 ramips: add preliminary support for the RT3662/RT3883 SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:17:59 +00:00
florian
9aa91c2c63 [package] kexec-tools: update to 2.0.3 (fixes #9846) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30493 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 12:36:36 +00:00
florian
17d0a31e9d [malta] add support for 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30492 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 12:36:34 +00:00
hauke
adf8b5a51f brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30488 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 22:41:20 +00:00
hauke
e1a53dd6b0 brcm47xx: activate config bug to show warnings 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30487 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 22:40:01 +00:00
nbd
9bc4638399 gcc 4.6: port over the missing patch 850-use_shared_libgcc.patch to prevent libgcc crap from leaking into every single binary 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 20:25:47 +00:00
nbd
4cf5dc60f9 swconfig: fix off-by-one error, causing segfaults on gcc 4.6+ (fixes #9765) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30485 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 19:27:01 +00:00
nbd
444f3dd7f1 package/grub: fix stage2 link with recent binutils 
We want the `_start's symbols to be at the very beginning of the `stage2'
binary's `.text' section. However, nothing enforces this requirement. With
recent binutils (ie. post 2.19.1), this results in a corrupt binary, as ld(1)
puts another symbol (eg. `journal_init') at the beginning of the section.

Fix this by providing a stripped down version of the default linker script
where we enforces the position of `_start' in the `.text' section.

Patch by Arnaud Lacombe (#10444)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30484 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 18:40:18 +00:00
juhosg
71da0d9534 ramips: use GENERIC_{4,8}M image template for WR5123GN 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30483 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 18:04:47 +00:00
juhosg
85b1ee0e18 ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30482 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 18:04:46 +00:00
hauke
1b56ff8998 brcm47xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30481 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 16:45:27 +00:00
hauke
6d7798dc01 brcm47xx: update usb driver for brcm47xx. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30480 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 16:38:10 +00:00
nbd
947736eb77 tools/genext2fs: do not include the host getline.h, it breaks the tool in subtle ways, and the source already has a getline replacement 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30479 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 16:12:08 +00:00
nbd
e59549b5a0 glibc: remove all previous (ancient) versions, add 2.14 (partially based on a patch and testing by WillieNL) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30478 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 16:12:01 +00:00
nbd
ae2cd78ff5 broadcom-diag: fix WRT150N/WRT160N detection (patch from #10836) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30477 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 15:43:14 +00:00
juhosg
dd584f3173 ramips: add initial support for 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30476 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 12:52:14 +00:00
juhosg
c9a5f3f810 ramips: include 'linux/module.h' in the ramips_spi driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30475 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 12:52:13 +00:00
juhosg
4c24144f1f ramips: rt288x: remove per-board physmap_flash_data instances 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30474 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 12:52:12 +00:00
juhosg
40c07f37d9 ramips: rt305x: remove per-board physmap_flash_data instances 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 12:52:10 +00:00
kaloz
9701922238 [cns3xxx]: enable another l2 cache errate on newer kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30472 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 11:22:08 +00:00
kaloz
880df07125 [toolchain/binutils]: enable 2.22 for unsupported archs if BROKEN is enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30471 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 09:56:47 +00:00
kaloz
98ab10100c [toolchain/gcc]: upgrade vanilla gcc to 4.6.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30470 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 09:48:39 +00:00
kaloz
1f93aa565e [toolchain/binutils]: use binutils 2.22 by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30469 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 09:17:54 +00:00
kaloz
a7950ce0d8 [toolchain/uClibc]: use uClibc 0.9.33 by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30468 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 09:15:29 +00:00
kaloz
bf082bbd92 [tolchain/gcc]: use Linaro GCC 4.6 by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30467 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 09:14:18 +00:00
kaloz
3d87eafcef [toolchain/gcc]: update to latest Linaro releases 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30466 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 08:50:18 +00:00