* adds support for Artec Thincan
Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26919 3c298f89-4303-0410-b956-a3cf2f4a3e73
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26879 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Make sure that Geos baud-rate defaults correctly
Changeset 23414 somehow got reordered. The unconditional default trumps later settings.
contributed by Philip Prindeville
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25068 3c298f89-4303-0410-b956-a3cf2f4a3e73
This defines the Geos platform from Traverse Technologies in AUS.
This is a Geode LX800 with 512MB of DDR400 memory, 2 8139CP interfaces, 2 Solos ADSL2+ interfaces, USB, serial console, CF slot, and miniPCI slot.
I'll add support for the LEDs separately.
Signed-off-by: Philip A. Prindeville
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23390 3c298f89-4303-0410-b956-a3cf2f4a3e73
- use the host grub binary for grub install, but with target stage files
- disable SSP (-fno-stack-protector) & Compile Time Buffer Checks (-U_FORTIFY_SOURCE) if appropriate
- create a target grub package
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21305 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add a -combined suffix for grub+kernel+rootfs images and -rootfs for root filesystem only images
* change ext from .image to .img
* fix perms on VirtualBox .vdi image
* gzip ext2 rootfs image as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21246 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch brings up the net5501 platform.
Note that the x86/ target included support for all x86/ class
processors. That's not technically correct. This should be constrained
only to the "generic" subtarget. Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.
It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't. Again, moving
that to the generic subtarget.
Fortunately, this was a fairly benign tweak.
The net5501 board includes the following logic:
Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20794 3c298f89-4303-0410-b956-a3cf2f4a3e73
- clean up menu.lst template
- make grub usage of vt0 selectable in menuconfig
- choose appropriate default baudrate for soekris devices
- fix generation of grub menu for iso images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19681 3c298f89-4303-0410-b956-a3cf2f4a3e73
This fixes two errors when building iso filesystem:
a) dir root.grub/boot doesn't get created.
b) the creation of .image file by gen_image.sh which apparently is not needed
when building an iso.
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15682 3c298f89-4303-0410-b956-a3cf2f4a3e73
