qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-27 13:12:24 +02:00
Code
23,493 Commits 13 Branches 0 Tags 117 MiB
29377555bf
Commit Graph

23493 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
jow
29377555bf [package] base-files: let network_get_device() return the l3 interface, introduce network_get_physdev() to obtain the underlying iface (if applicable) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31960 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 00:20:16 +00:00
nbd
8c1c75ba17 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 20:39:50 +00:00
nbd
6cbf2e7dbd mac80211: use built-in regulatory database instead of crda to avoid various race conditions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31954 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 16:17:30 +00:00
nbd
1cf19d8a82 netifd: call /sbin/wifi up on /etc/init.d/network reload 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31941 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 14:22:42 +00:00
jow
7de192f60d [package] base-files: add network_get_device() to network.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31937 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 03:24:56 +00:00
jow
e1df4ecd68 [packages] firewall: fix nat reflection after netifd status format change 
- use /lib/functions/network.sh
 - simplify nat reflection code

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31936 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 03:15:05 +00:00
jow
41d413b29c [package] base-files: introduce /lib/functions/network.sh 
This file will contain common procedures to deal with network interfaces.
Initially provides network_get_ipaddr(), network_get_ipaddr6(),
network_get_subnet() and network_get_subnet6() to determine the
primary IP addresses or subnets of a given logical interface.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31935 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 03:15:02 +00:00
nbd
0f299fab07 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 02:55:59 +00:00
nbd
29aa2abbf6 libubox: update to 2012-05-26 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31933 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 02:55:50 +00:00
jow
9923737295 [package] iwinfo: assume that no tx power information is available if nl80211 returns 0 dBm maximum 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31932 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 00:52:26 +00:00
jow
8b4e17bfbc [package] uhttpd: 
- rewrite large parts of the server, use uloop event driven structure
	- support concurrent requests and make the upper limit configurable
	- implement initial version of HTTP-to-ubus JSON proxy and session.* namespace
	- add compile time support for debug information
	- code style changes
	- bump package revision

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31931 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 00:52:24 +00:00
nbd
dfea949949 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 21:02:41 +00:00
nbd
295c63c334 kernel: fix suppressing -s for linking modules when profiling is enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 21:02:36 +00:00
juhosg
d3fa7efc8c ar71xx: fix TL-WR1041 image size 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31923 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:21:47 +00:00
juhosg
75c71fcaa0 ramips: rt3883: add device registration code for the SPI controller 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:10:00 +00:00
juhosg
84b342399c ramips: allow to use the SPI driver on RT3662/RT3883 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31921 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:58 +00:00
juhosg
1e3e199faa ramips: rt3883: fix GPIO reservation for the SPI pins 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:56 +00:00
juhosg
0c9cb51fbb ramips: rt305x: remove superfluous controller_data assignment 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:52 +00:00
juhosg
ce2fd1dbc9 ramips: make rt2x00 firmware extraction quiet 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:50 +00:00
juhosg
39068e8b25 generic: rtl8367: rename a misnamed variable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31917 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:47 +00:00
juhosg
11d6be39a6 generic: rtl8366_smi: remove duplicated spinlock initialization 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31916 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:45 +00:00
juhosg
63d3e3114d generic: rtl8366_smi: rename debugfs Kconfig symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31915 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:43 +00:00
juhosg
5a1c605a9e generic: rtl8367: allow to use VLANs > 31 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31914 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:41 +00:00
blogic
e4b72001f6 [lantiq] move files-3.3 -> files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31912 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 16:13:02 +00:00
blogic
c9e0ccf07c [lantiq] 3.2 R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31911 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 16:12:59 +00:00
blogic
c8e24ec13e [lantiq] dgn3500 support with eeprom loading from sysfs 
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31910 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 16:02:22 +00:00
blogic
f72e7bf12d [lantiq] fixes zyxel p2601hnfx 
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31909 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 16:02:20 +00:00
blogic
2b03aafe31 [lantiq] Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values. 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31908 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 16:02:16 +00:00
nbd
ed3a907ece kernel: remove more unnecessary kernel version checks/dependencies 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31907 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:22:13 +00:00
nbd
95d801c59d kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31906 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:16:37 +00:00
juhosg
fe77f5d922 linux/3.2: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31905 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:37 +00:00
juhosg
1ee6958324 xburst: remove support for old kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31904 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:35 +00:00
juhosg
287550be20 xburst: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31903 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:33 +00:00
juhosg
8f313bd0fd xburst: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31902 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:32 +00:00
juhosg
e2dd39f3dc ppc44x: remove 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31901 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:30 +00:00
juhosg
14aefb43c8 ppx44x: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:28 +00:00
juhosg
5061f8857c ppc44x: add support for 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31899 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:27 +00:00
juhosg
000012926a cobalt: switch to 3.3 and add broken flag 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31898 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:26 +00:00
juhosg
bc9bf715d9 ep93xx: remove 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31897 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:24 +00:00
juhosg
dee80699d1 ep93xx: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31896 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:23 +00:00
juhosg
a195c06c00 ep93xx: add support for 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:21 +00:00
juhosg
e468dc1413 au1000: remove 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31894 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:18 +00:00
juhosg
accbbf39c0 au1000: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31893 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:17 +00:00
juhosg
5c8cc31fb8 au1000: add support for 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31892 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:15 +00:00
juhosg
e3e4a95d9b linux/3.1: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31891 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:09 +00:00
juhosg
e17d6b0709 omap24xx: remove 3.1 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31890 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:07 +00:00
juhosg
4ea55a169b omap24xx: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31889 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:05 +00:00
juhosg
c7e92c13d2 cns3xxx: remove 3.1 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31888 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:03 +00:00
juhosg
a27b48f2d8 cns3xxx: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31887 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:02 +00:00
nbd
4cf70ab2e1 kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31886 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 14:43:58 +00:00