qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-23 22:17:43 +02:00
Code
24,357 Commits 13 Branches 0 Tags 117 MiB
36f237c9ef
Commit Graph

24357 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
juhosg
228681e328 ar71xx: set MII interface speed from the set_speed callbacks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29013 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:59 +00:00
juhosg
7571fae3ab ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29012 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:57 +00:00
juhosg
95d3699b73 ar71xx: ag71xx: remove MII interface setup code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:56 +00:00
juhosg
13e0098939 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:54 +00:00
juhosg
4cc612872a ar71xx: fix occasional kernel hangs during boot on AR934x 
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29009 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:52 +00:00
juhosg
5fb5b4483b ar71xx: refresh kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29008 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:51 +00:00
jogo
85ec5ce98d linux: update 3.1 to 3.1.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29007 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 10:48:05 +00:00
blogic
e5c40dc4c3 lantiq: add uci-defaults code for handling leds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:21 +00:00
blogic
bddadbe32b lantiq: add /lib/lantiq.sh and make hotplug handlers use it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:16 +00:00
blogic
a8be2afd85 lantiq: rename leds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29002 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:12 +00:00
blogic
14ec28a2a3 lantiq: split compat headers out of bsp header patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29001 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:07 +00:00
blogic
98bf7b355b lantiq: adds hotplug handler for loading rt2x00 firmware 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29000 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:01 +00:00
blogic
1efd56db6c lantiq: adds hotplug handler for handling buttons and makes w303v work with it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28999 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:39:56 +00:00
blogic
4919aff42f lantiq: cleanup default package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28998 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:39:51 +00:00
blogic
2c1120a3b3 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28994 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 18:41:15 +00:00
juhosg
9394e4a065 kernel: ar8216: add support for the AR8236 switch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 14:09:52 +00:00
juhosg
63898b07cc kernel: ar8216: move port vlan setup into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28992 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 14:09:50 +00:00
nico
83e18cc961 package/base-files: enhance service functions 
* allow matching process by name (useful for processes changing it)
 * check if first argument is executable
 * fix function name used in error messages

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28991 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 13:53:15 +00:00
juhosg
0999f2be56 ar71xx: use the button for WPS control on the DB120 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28990 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:20 +00:00
juhosg
69a4e7ba6a ar71xx: register the second ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28989 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:19 +00:00
juhosg
f42393b3c6 ar71xx: implement SoC specific phy interface setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28988 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:18 +00:00
juhosg
428566d3de ar71xx: move phy interface setup into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28987 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:16 +00:00
juhosg
9c2632e5aa ar71xx: register both MDIO bus on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28986 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:59 +00:00
juhosg
8255c166fd ar71xx: add AR934X specific MDIO registration code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28985 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:56 +00:00
juhosg
79bc01d085 ar71xx: add a secondary mdio bus 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28984 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:54 +00:00
juhosg
4e5c6e94da ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28983 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:50 +00:00
juhosg
f20b056795 ar71xx: add an id argument to ar71xx_add_device_mdio 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28982 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:48 +00:00
juhosg
7d1b33ecbd ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28981 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:42 +00:00
juhosg
1553f9eabd ar71xx: add AR934x specific USB setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28980 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:20 +00:00
juhosg
5f0b41bae5 ar71xx: register the first ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28979 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:18 +00:00
juhosg
8a3f26299d ar71xx: allow to register ethernet interfaces for AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28978 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:17 +00:00
juhosg
3cd36281d9 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28977 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:16 +00:00
juhosg
a1f5559837 ar71xx: add AR934X specific bootstrap and reset register bits 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28976 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:15 +00:00
juhosg
a3d2129487 ar71xx: add diag support for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:10 +00:00
juhosg
bb977eb73b ar71xx: fix GPIO direction setup for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28974 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:09 +00:00
juhosg
1d1240855a ar71xx: fix AR934X clock frequency calculation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28973 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:08 +00:00
juhosg
29cb2db261 package: add om2p-watchdog script 
Based on a patch by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28972 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:06 +00:00
juhosg
b780360c45 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28971 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:04 +00:00
blogic
396af9c62b pjsip: bump to 1.10 and improve ltq_tapi backend 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28963 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 22:23:26 +00:00
blogic
409ee4a226 lantiq: improve falcon package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28962 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 21:59:11 +00:00
blogic
79a88f017c lantiq: fix breakage introduced in 3.1 bump 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28961 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 21:59:01 +00:00
jow
0eced37b72 [package] base-files: now that the initial password is completely empty (and not primed with "!") adjust login.sh for it to make telnetd available again 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28943 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 13:25:31 +00:00
nico
16913a975c package/base-files-network: fix udhcpc issues introduced in r28866 (closes: #10383) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28942 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 13:23:29 +00:00
blogic
f68235d274 remove empty folder lqtapi 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28941 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 09:06:49 +00:00
jow
1643ed70b0 [package] mac80211: add antenna control api for b43 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28940 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-10 23:07:42 +00:00
florian
06d2d3ec5c [package] acx-mac80211: update to 20111030 
Fixes build failures with Linux 3.1+

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28939 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-10 15:31:37 +00:00
kaloz
d84d665eb3 [base-files]: nuke another 2.4 skeleton 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28937 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-10 13:39:06 +00:00
kaloz
85639cdac5 enable and use shadow passwords by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28936 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-10 12:55:01 +00:00
kaloz
6eae697cb7 [base-files]: the empty root password should be empty ;) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28935 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-10 12:47:50 +00:00
jow
329ee765ee base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28933 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-10 12:16:41 +00:00