1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-05 16:19:42 +02:00
Commit Graph

23655 Commits

Author SHA1 Message Date
juhosg
dcea0bf81c x86/thincan: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:01 +00:00
juhosg
db081f453b x86/xen_domu: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:00 +00:00
juhosg
4dcd044429 x86/kvm_guest: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:58 +00:00
juhosg
5fe6f552d3 x86/generic: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:56 +00:00
nbd
48b0fc861f qos-scripts: use kmod-sched-core instead of kmod-sched
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31761 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:23 +00:00
nbd
6dab4ebcb6 kernel: split kmod-sched into kmod-sched-core and kmod-sched
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31760 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:19 +00:00
nbd
a456564ab0 qos-scripts: replace sfq/red with fq_codel - massively improves latency under load
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31759 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:16 +00:00
nbd
aef1aa788e iproute2: update to 3.3.0, drop a few useless old patches, add codel support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31758 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:12 +00:00
nbd
b576ae7e40 kernel: add codel and fq_codel support to kmod-sched (patch by Dave Täht)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31757 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:08 +00:00
nbd
b3c4d367ce kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht)
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:03 +00:00
jow
b8351c325d [package] firewall: rework interface address determination to skip ipv6 addresses
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 13:37:49 +00:00
jow
0945d8e239 [package] firewall: fix nat reflection after netifd switch (#11460)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 13:03:54 +00:00
juhosg
287ab9841e x86/alix2: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:45:02 +00:00
juhosg
2b245c96a9 x86/net5501: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:59 +00:00
juhosg
3261e9d285 x86: sync 3.3 configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:55 +00:00
juhosg
2075a32be0 x86: sync 3.2 configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:52 +00:00
juhosg
005d04baef x86: sync 2.6.39 configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:49 +00:00
juhosg
7b285c80fb linux/3.3: add missing symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:46 +00:00
nbd
a01f231707 libubox: update to latest version, fixes handling of numbers in jshn variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31747 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 08:45:24 +00:00
jow
0813fa3e2c [tools] scons: probe "python" and "python2" first in pywrap.sh in order to use the users preferred version if possible
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31743 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 20:29:32 +00:00
jow
909d9c8ff7 [tools] scons: wrap python invocations with helper script that attempts to find a non-3.x python
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31742 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 20:04:07 +00:00
nbd
a7f8243bd5 tools/scons: remove the python 3 compat patch, it is incomplete and breaks with python 2.5.2. i guess scons with python 3 is a lost cause...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31741 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 13:42:36 +00:00
nbd
f318c1e452 uClibc: update to 0.9.33.2, fixes #4420
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31740 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 13:42:32 +00:00
nbd
c691ce8b79 uClibc: remove 0.9.32, it is no longer necessary
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31739 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 13:42:28 +00:00
juhosg
003fb14844 linux: add CONFIG_POWER_SUPPLY_DEBUG symbol
It was missing in the previous commit.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 11:12:31 +00:00
juhosg
5cc763c7b2 linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:58:52 +00:00
nbd
82ff0a8569 ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:36:39 +00:00
blogic
6a54667829 [lantiq] code style cleanup of the mach files
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:05 +00:00
blogic
993c2e232f [lantiq] adds zyxel p2601hnfx support
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:02 +00:00
blogic
5af9c39784 [lantiq] set 3.3.6 as default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:37:59 +00:00
nbd
5cecffbb27 netifd: bring up all interfaces on /etc/init.d/network restart
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 23:50:59 +00:00
nbd
745d195d8e enable netifd by default and add its config variable to PKG_CONFIG_DEPENDS in a few relevant places
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 23:33:35 +00:00
nbd
fb5042cd2e netifd: use the new json_get_vars function in the dhcp helper script
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 20:58:27 +00:00
nbd
d84fcff653 ppp: use the new json_get_vars function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 20:58:24 +00:00
nbd
480f722254 pptp: use the new json_get_vars function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 20:58:20 +00:00
nbd
3040f27dde pptp: use resolveip, schedule restart if dns lookups fail
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31724 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 20:58:16 +00:00
nbd
0547603d0f netifd: update to 2012-05-14, fixes a file descriptor leak, fixes a use-after-free on host dependencies, adds a command for scheduling proto-shell restarts and adds support for more address options (point to point, broadcast)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 20:58:13 +00:00
nbd
d1b7790fd6 pptp: drop the dependency on ip if netifd is selected
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 20:58:09 +00:00
nbd
7e875d9cb9 libubox: update to latest version, adds a new function in jshn.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31721 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 20:58:06 +00:00
blogic
1fffba2171 [lantiq] set 3.3.5 as default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 16:11:26 +00:00
juhosg
674c61407c linux/3.0: R.I.P.
It is used by the broken omap35xx/gumstix target only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:34 +00:00
juhosg
c7b0f82f36 realview: remove 3.0 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31716 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:32 +00:00
juhosg
fd4e26402c realview: switch to 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:31 +00:00
juhosg
6b364205d7 realview: add 3.3 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:29 +00:00
juhosg
96bc3c2734 linux/3.3: more missing config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:23 +00:00
nbd
e19c65f7dd relayd: fix return code check for resolving network->ifname mapping
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 14:08:43 +00:00
nbd
3c5d4ad5a3 imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index (fixes #11450)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 14:00:01 +00:00
hauke
af5a56a89c kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 11:28:02 +00:00
juhosg
298dcd23d1 kernel: update linux 3.3 to 3.3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 09:18:32 +00:00
nbd
7417c040c7 scripts/ipkg-make-index.sh: use bash instead of /bin/sh to fix use of [[ ]]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 16:29:39 +00:00