1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-26 19:58:59 +02:00
Commit Graph

22 Commits

Author SHA1 Message Date
florian
c4ee4e8bc8 [brcm63xx] fix T-Com Speedport W 500V default config
The device is called SPW500V, not SP500W.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-09 13:09:02 +00:00
cshore
c91e2ce710 base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it.
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26 04:18:04 +00:00
cshore
636113691a [brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 18:59:58 +00:00
cshore
6e4ddb80d8 [brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 15:15:54 +00:00
cshore
27a7d97c15 [brcm63xx] Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 15:15:41 +00:00
cshore
91050b8f9f [brcm63xx] base-files: Added the preinit information for reset button and preinit indication led, and preinit interface
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06 06:46:03 +00:00
cshore
87689d1064 [bcm63xx] base-files: Added network defconfig because board only has one ethernet (4-port switch)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06 02:01:08 +00:00
cshore
f7a2edf410 bcm63xx: Add support for the T-Com Speedport W 500V.
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:44 +00:00
cshore
d26482830e bcm63xx: Finalize support for DSL-274xB, rev C2.
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:36 +00:00
cshore
36faccabad bcm63xx: Allow 'colored' power leds.
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:30 +00:00
cshore
74fd46691e bcm63xx: Don't hardcode the switch ethernet interface in preinit.
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:26 +00:00
cshore
2ce35911df bcm63xx: Add defconfigs.
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:19 +00:00
cshore
53a9db66e3 [brcm63xx]: base-files: diag.sh: For power button as preinit status led, end with led left on, not off
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-02 19:33:08 +00:00
cshore
b1544d6256 [brcm63xx] base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-02 19:32:59 +00:00
cshore
05bb6a9dac brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:33:20 +00:00
cshore
2bc3104865 brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:33:09 +00:00
cshore
21bfdcd4ab brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:32:58 +00:00
cshore
705e618a3c brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:32:47 +00:00
florian
bda997ae98 [brcm63xx] we are using the default-on trigger for power LEDs, no need to change their state from userspace
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-18 09:27:33 +00:00
florian
8a891d72ed [brcm63xx] register GPIO-connected LEDs for known boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-18 00:40:23 +00:00
florian
7f464dbf8c [brcm63xx] add support for sysupgrade (#5117)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-17 16:53:57 +00:00
florian
fee51f1162 Make 4-port LAN and 1 port wan configurations work
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-26 15:51:55 +00:00