qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-29 07:59:53 +02:00
Code
23,183 Commits 13 Branches 0 Tags 117 MiB
439a47e380
Commit Graph

23183 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
juhosg
439a47e380 ramips: W306R V2.0 - GPIO and Network fixes 
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 19:17:59 +00:00
juhosg
1f249922ce ramips: Make serial console for DIR-300-B1 work again 
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 19:17:58 +00:00
juhosg
371f652cf1 mpc83xx: remove 2.6.36 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:26 +00:00
juhosg
d316e764cb mpc83xx: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:25 +00:00
juhosg
01415999cf mpc83xx: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:22 +00:00
juhosg
4b296a3cb3 linux/3.3: add more missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31552 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:19 +00:00
florian
ec6780b901 [package] openssl: update to 1.0.1b 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31551 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 15:40:32 +00:00
florian
a1c9b29340 [brcm63xx] use a define for the poll and debounce interval 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 15:40:26 +00:00
jow
67861b3726 [scripts] ext-toolchain.sh: don't pass CFLAGS when wrapping ld 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-01 22:45:55 +00:00
juhosg
c5006eede0 linux/3.3: add more missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-01 08:00:26 +00:00
juhosg
a12fd13e23 move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-01 08:00:25 +00:00
kaloz
7e7649baa9 [coldfire]: switch to 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31546 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-01 07:00:17 +00:00
nbd
7877ca154f relayd: move the interface fixup to the right place 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31545 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 18:27:12 +00:00
nbd
866b5511e1 relayd: use config_load+fixup_interface instead of scan_interfaces to speed up startup time 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31544 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 18:24:00 +00:00
nbd
b905c102f0 base-files-network: add a fixup_interface function like with the netifd compatibility scripts - allows selective fixup of individual interface sections instead of having to do the full scan_interfaces 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31543 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 18:23:56 +00:00
nbd
5bae60a024 relayd: use an init script instead of a legacy network proto handler (fixes #11276) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31542 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 18:23:52 +00:00
juhosg
e51f7c5d1b kernel: update linux 3.3 to 3.3.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 08:38:11 +00:00
nbd
90ed704fdb ath9k: merge a ar93xx ht40 performance fix 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 08:20:34 +00:00
nbd
08759f0f3b mac80211: fix station lookup issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 07:57:09 +00:00
nbd
fcaac512c0 mac80211: load lib80211 after cfg80211 (#11342) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31537 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 21:00:17 +00:00
juhosg
1cfcccb5b0 linux: rtl836x: add a generic reset_switch function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31536 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:31 +00:00
juhosg
5df734f0bc linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:29 +00:00
juhosg
1dcdbf2d3f linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:26 +00:00
juhosg
f07500066e ar71xx: allow to disable link polling on unused PHYs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:24 +00:00
juhosg
b20dcb287e rb532: remove 2.6.35 support 
The generic 2.6.35 support has been remove long time ago.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 16:56:07 +00:00
juhosg
8ca642965f linux/3.3: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 16:56:03 +00:00
juhosg
be6aa90ec2 rdc: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31530 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:59:49 +00:00
juhosg
8e06d437aa mpc85xx: add support for 3.3 
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31529 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:55:28 +00:00
juhosg
c3bfb23a87 orion: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31528 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:20:40 +00:00
juhosg
418e0144a0 linux/3.3: yet another missing symbol 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31527 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:08:24 +00:00
juhosg
854a591dbd package/kernel: add module for the Pericom PT7C4338 RTC chip 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:08:23 +00:00
juhosg
d2863cfd2d linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:08:22 +00:00
juhosg
c7ff282f4e package/kernel: add i2c module support for Freescale MPC processors 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31524 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:08:21 +00:00
juhosg
3adac4c8e4 mpc85xx: add kmod-booke-wdt to the default packages 
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31523 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:38 +00:00
juhosg
a9636d6819 package/kernel: add module for the Booke watchdog 
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:37 +00:00
juhosg
e4a752ed29 mpc85xx: don't override CONFIG_WATHCDOG 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31521 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:36 +00:00
juhosg
95fc5670e1 linux: move CONFIG_BOOKE_WDT to the generic config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31520 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:34 +00:00
juhosg
afab35ea6e linux/2.6.36: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31519 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:33 +00:00
juhosg
b2fc0c6423 linux: add broken flag to targets which are using 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31518 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:32 +00:00
nbd
907c8fd776 mac80211: fix WDS AP authentication issues (#11261, #11318) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31517 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 13:47:37 +00:00
nbd
f5e34b16d4 netifd: update to latest version, fixes address/route list handling issues and fixes dual-stack ppp route handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31516 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 12:20:10 +00:00
nbd
f730e825f0 hostapd: update to 20120428, fixes some radius issues and wds ap mac address issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 11:14:53 +00:00
nbd
b037731dd6 pppd: fix parsing the ipv6-{up,down}-script option 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 10:08:33 +00:00
juhosg
3fa6652791 adm5120: create a new subtarget for the RB1xx devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:46 +00:00
juhosg
d50d82ab6e adm5120: share a common kernel config between the subtargets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:44 +00:00
juhosg
0c3e51f31c adm5120: merge 3.3 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31511 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:43 +00:00
juhosg
71b94eaba4 adm5120: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31510 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:37 +00:00
juhosg
064b1182e5 adm5120: switch to 3.3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31509 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:36 +00:00
juhosg
f2d86d5a21 adm5120: fix macronix bootloc patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31508 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:35 +00:00
juhosg
399af78951 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31507 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:33 +00:00