1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 15:35:30 +02:00
Commit Graph

2417 Commits

Author SHA1 Message Date
juhosg
444d504487 [adm5120] use the right irq_handler in the CF driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12 10:53:49 +00:00
juhosg
0bebc59f0a [adm5120] fix mac address setup on RouterBOARDs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12 08:43:41 +00:00
ryd
10d5da709b Removing Grub for olpc (unnecessary)
Adding Bootscript
Some SD-Card fixes
Config changes


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12 01:46:24 +00:00
nbd
2e0c76b9fb remove an unused #include statement that is causing compile issues on osx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12 00:11:22 +00:00
juhosg
d62dc9dbcf [adm5120] enable wait state pin for the CF slot on the RB153 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-11 17:59:42 +00:00
juhosg
c55e60e2ba [adm5120] RB153 CF driver fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-11 16:46:55 +00:00
juhosg
a7f49cd3e8 [adm5120] new experimental driver for the CF slot on the RouterBOARD 153
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-11 09:00:06 +00:00
florian
c0d490d3c5 Replace deprecated DEBUG config symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-11 08:30:48 +00:00
blogic
77ce46e9f8 added CONFIG_DANUBE_PCI_HW_SWAP
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10 20:26:15 +00:00
blogic
80484c3972 initial merge of danube, pci is still broken and the new dma code still needs to be tested, before the merge
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10 20:00:55 +00:00
juhosg
75866965cd [adm5120] add support for GPIO IRQs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10 14:05:01 +00:00
florian
22825c757c Enable SSB ohci driver (#2828)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10 10:14:53 +00:00
florian
90b21a434e Disable CONFIG_NETDEVICES_MULTIQUEUE for ar7 until we fix the race condition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10 09:56:44 +00:00
nbd
c3cd9cb9ab Use $(CP) instead of $(INSTALL_BIN) for binaries.
Signed-off-by: Andy Boyett <agb-openwrt@padded-cell.net>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 18:53:06 +00:00
nbd
10d9f5afc5 suppress bug after compiling last package in kamikaze SDK.
This patch corrects https://dev.openwrt.org/ticket/2508
An error was raised when no Config.in file was found in package/
Signed-off-by: Julien Pinon <julien.pinon@luceor.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9692 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 18:52:52 +00:00
florian
95b3525348 Forgot removing that file while applying patch from #2757
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 17:52:27 +00:00
florian
9ae7818ff7 Add bcm5354 patches from #2757
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 16:11:52 +00:00
florian
8afdee9032 Add bcm5354 patch from #2754
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 15:51:45 +00:00
florian
26e5350908 Fix missing return
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 15:15:32 +00:00
florian
c006847c0b Setup MAC addresses for routerboards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 14:43:42 +00:00
pavlov
2867787dbc bump kernel to 2.6.23.9 for x86
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-08 15:53:05 +00:00
pavlov
92526421f1 updated layer7 to 2.15.. current is 2.16.1, i might bump again, this has been uncommitted for a bit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-08 15:52:26 +00:00
rwhitby
cf536445de ixp4xx: Rename fsg3 subtarget to harddisk to better reflect the intention of the subtarget
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07 22:30:56 +00:00
rwhitby
8fd723552a ixp4xx: Split into two subtargets, one normal and one for boards which boot directly from attached storage (and therefore need most kernel modules compiled in)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07 22:29:44 +00:00
nbd
1e70eae581 add missing kernel config symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07 19:24:16 +00:00
nbd
e869e415b7 Minor patch to the AR7 diag.sh to make the status LED a bit more useful. From the patch:
This setup gives us 3.5 distinguishable states:

- Solid OFF:  Bootloader running, or kernel hung (timer task stalled)
- Solid ON:   Kernel hung (timer task stalled)
- 5Hz blink:  preinit
- Heartbeat:  normal operation

Signed-off-by: oliver@opencloud.com


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07 00:03:14 +00:00
nbd
2cfedd2a67 [PATCH 2/2] Reimplement rx ring with EOQ markers to avoid reset storms
Signed-off-by: oliver@opencloud.com


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07 00:03:10 +00:00
nbd
032de762b4 [PATCH 1/2] Fix race between device reset and start_xmit
Signed-off-by: oliver@opencloud.com


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07 00:03:06 +00:00
juhosg
b4f5ad4506 [adm5120] add copyright header to the USB driver's files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-05 09:32:04 +00:00
nbd
863d4e55d3 Fix VLYNQ device enable for DG834Gv1
This patch allows VLYNQ devices on the DG834Gv1 to be successfully
enabled.

Currently the "__vlynq_enable_device" function attempts to set the VLYNQ
device clock divisor to values from 1 through 8 until a link is
successfully established. On the DG834Gv1 (but not the DG834Gv2),
setting the VLYNQ device clock divisor to 1 (full rate) results in all
further VLYNQ operations failing (including software reset), so the
device is never enabled. This patches changes the function to only
attempt divisors 2 through 8, and hence the device is successfully
enabled.

Signed-off-by: Nick Forbes <nick.forbes@huntsworth.com>

---------


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-04 12:49:54 +00:00
juhosg
71e8379721 [adm5120] switch to 2.6.23.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-29 08:51:59 +00:00
thepeople
346bf06063 add support for the PCEngines Alix
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-28 04:07:24 +00:00
thepeople
d20afc8d22 add txpower patches and add uci configuration file From: Vasilis T. (aka Acinonyx)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-28 03:44:18 +00:00
nbd
2f2e0b4f59 ps3: use readable video mode descriptions in readme
The ps3 video modes can be specified as readable names (eg "720p"), so
use those instead.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-28 02:36:06 +00:00
nbd
c37770c763 ps3: build-in ps3 system manager
This changes the ps3 kernel config to build-in the System Manager
module, which is required for proper shutdown and reboot.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-28 02:36:03 +00:00
juhosg
082dc936c4 [adm5120] add Edimax BR-61x4WG board support to the LED driver, thanks to scream_ (closes: #2756)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-26 19:02:12 +00:00
juhosg
caf5ee317c [adm5120] more USB driver fixes, now it passes usbtests 1-14
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-26 08:49:58 +00:00
nbd
ef7eae373b work around kernel config issues with sound modules
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-25 17:15:30 +00:00
juhosg
1f01b9bc98 [adm5120] fix USB driver to compile with ADMH_VERBOSE_DEBUG defined
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-23 18:11:49 +00:00
juhosg
6c9a138d3c [adm5120] USB driver updates, the driver passes usbtests 1-10 now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-23 15:53:35 +00:00
juhosg
4d45522851 [adm5120] disable INITRAMFS_EXTRA_FILES, in initramfs it cause errors
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-23 14:58:55 +00:00
florian
5cd6d51b76 Fix build on non-SMP machines of the remote GDB debugging (#2666)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16 07:39:48 +00:00
florian
6cc483ae40 Fix tx stats (#2705)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16 07:31:28 +00:00
nbd
4f7e54d66e fix wl-700gE ide init (patch by biblbroks, fixes #2686)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16 03:11:30 +00:00
nbd
547c09c6fa add lzma compressed initramfs for bcm947xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16 03:11:27 +00:00
nbd
11bfc2aea9 add missing config symbols for ide on broadcom 4780
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16 03:11:24 +00:00
nbd
93f668f049 fix initramfs images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16 03:11:21 +00:00
nbd
2fa2282b6f create broadcom initramfs images and move the lzma decompressor area a bit further
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16 03:11:17 +00:00
juhosg
7fcae4c7e6 [adm5120] more USB driver changes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-15 09:16:47 +00:00
nbd
d895ddd832 fix the image builder
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-14 23:11:07 +00:00