qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 20:55:30 +02:00
Code
23,351 Commits 13 Branches 0 Tags 117 MiB
48b0fc861f
Commit Graph

9377 Commits

Author SHA1 Message Date
nbd
b3c4d367ce kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht) 
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31756 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 15:23:03 +00:00
juhosg
287ab9841e x86/alix2: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31753 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:45:02 +00:00
juhosg
2b245c96a9 x86/net5501: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31752 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:59 +00:00
juhosg
3261e9d285 x86: sync 3.3 configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31751 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:55 +00:00
juhosg
2075a32be0 x86: sync 3.2 configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31750 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:52 +00:00
juhosg
005d04baef x86: sync 2.6.39 configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:49 +00:00
juhosg
7b285c80fb linux/3.3: add missing symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31748 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:46 +00:00
juhosg
003fb14844 linux: add CONFIG_POWER_SUPPLY_DEBUG symbol 
It was missing in the previous commit.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31738 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 11:12:31 +00:00
juhosg
5cc763c7b2 linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 10:58:52 +00:00
nbd
82ff0a8569 ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 10:36:39 +00:00
blogic
6a54667829 [lantiq] code style cleanup of the mach files 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31735 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 09:38:05 +00:00
blogic
993c2e232f [lantiq] adds zyxel p2601hnfx support 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 09:38:02 +00:00
blogic
5af9c39784 [lantiq] set 3.3.6 as default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31733 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 09:37:59 +00:00
blogic
1fffba2171 [lantiq] set 3.3.5 as default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31718 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 16:11:26 +00:00
juhosg
674c61407c linux/3.0: R.I.P. 
It is used by the broken omap35xx/gumstix target only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31717 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:34 +00:00
juhosg
c7b0f82f36 realview: remove 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31716 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:32 +00:00
juhosg
fd4e26402c realview: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31715 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:31 +00:00
juhosg
6b364205d7 realview: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31714 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:29 +00:00
juhosg
96bc3c2734 linux/3.3: more missing config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31713 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:23 +00:00
nbd
3c5d4ad5a3 imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index (fixes #11450) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31711 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 14:00:01 +00:00
hauke
af5a56a89c kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 11:28:02 +00:00
juhosg
298dcd23d1 kernel: update linux 3.3 to 3.3.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 09:18:32 +00:00
hauke
3ad338f697 amazon: fix section mismatch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31707 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 15:31:42 +00:00
hauke
c8c0045b91 amazon: update amazon target to kernel 3.3 
This is just compile tested, my device is currently not working.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 15:10:40 +00:00
juhosg
501390d552 gemini: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31700 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 12:04:04 +00:00
juhosg
1d2df477ff gemini: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 12:04:02 +00:00
juhosg
6a4f0ff0d7 gemini: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31698 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 12:03:59 +00:00
hauke
0b98ffdc6a brcm47xx: generate image for Linksys WRT610N V1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31696 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 00:16:57 +00:00
hauke
05c09e7de4 kernel: ssb: add PCI IDs 0x4322 and 43222 
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

This fixes #10887.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 00:08:12 +00:00
hauke
8297c7ff8b brcm47xx: fix tg3 ssb patch 
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31694 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 23:59:12 +00:00
juhosg
d2821676fa linux/2.6.38: R.I.P. 
It is used only by the broken coldfire target.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31688 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 12:05:21 +00:00
juhosg
4b6fa24c63 linux/2.6.37: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31687 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 12:05:19 +00:00
juhosg
faeed4ab57 linux: add broken flag to remaining targets which are using 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31686 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 12:05:18 +00:00
juhosg
12701e008f iop32x: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31685 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:36 +00:00
juhosg
9a9b022066 iop32x: switch to 3.3 
It is compile tested only, so add a broken flag.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31684 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:34 +00:00
juhosg
5f514056be iop32x: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31683 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:32 +00:00
juhosg
8cc898c122 sibyte: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31682 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:30 +00:00
juhosg
c53f588e2b sibyte: switch to 3.3 
It is compile tested only, so add a broken flag.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31681 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:28 +00:00
juhosg
8e84deb1d4 sibyte: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31680 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:26 +00:00
juhosg
976d0df463 ixp4xx: fix ixp4xx_crypto build error 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31679 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:23 +00:00
juhosg
88a3d8e65f orion: remove the broken broken flag 
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9

Additionally, the flag was added to a wrong place
so it had no effect.

Thanks to StrikerNL for testing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31674 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-10 20:20:43 +00:00
juhosg
f32805af2d kirkwood: fix Kconfig symbol for NSA-310 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31673 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 16:16:52 +00:00
blogic
510366a907 [lantiq] Add 3.3 config files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31672 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 12:52:24 +00:00
blogic
d0ba13b35e [lantiq] Add missing 3.3 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31671 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 12:52:21 +00:00
blogic
dcc5e22d87 [lantiq] Drop 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31670 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 12:52:19 +00:00
juhosg
ee96308b09 kirkwood: add support for the ZyXEL NSA-310 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31669 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:43 +00:00
juhosg
838f9f9085 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support 
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31668 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:41 +00:00
juhosg
843274aa37 kirkwood: enable GPIO sysfs interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31667 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:40 +00:00
juhosg
7af2aa70a5 kirkwood: nuke 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31666 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:39 +00:00
juhosg
aafa8c1910 kirkwood: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31665 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:37 +00:00