qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-30 23:21:44 +02:00
Code
21,227 Commits 13 Branches 0 Tags 117 MiB
4bf096096c
Commit Graph

7895 Commits

Author SHA1 Message Date
juhosg
45b5e79de8 ramips: fix a section mismatch warning 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27382 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:46 +00:00
juhosg
17d001231c ramips: remove unused include from the common GPIO code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27381 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:44 +00:00
juhosg
9589c35dd3 ramips: disable watchdog on sysupgrade 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27380 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:43 +00:00
juhosg
7807b0552e ramips: swap target check in image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27379 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:42 +00:00
juhosg
b1476a05c2 ramips: update HW550-3G mtd partitions 
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27378 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:41 +00:00
juhosg
d786690857 ramips: set cp0_perfcount_irq for RT305X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27377 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:40 +00:00
cshore
2f9bb1e3e1 [x86] target/patches: This has been sent upstream, but might not appear for a couple of weeks. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27373 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 03:20:04 +00:00
cshore
db1f43a9a0 [x86] target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27371 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 03:14:53 +00:00
cshore
33241d2031 [x86] Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped." 
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27370 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 03:14:51 +00:00
cshore
9b1189e191 Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27369 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 03:14:48 +00:00
cshore
4887230f5c The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers. 
Include this on Geos.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27368 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 02:59:00 +00:00
juhosg
547c706620 ar71xx: use 4k image only for the AP121 board 
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27357 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-02 08:37:59 +00:00
kaloz
0060110094 [cns21xx]: cns21xx belongs to the Econa family, too 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27354 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-02 08:31:25 +00:00
kaloz
d7ba81230a [etrax]: mark it broken 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27349 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-02 07:26:04 +00:00
jow
422a78af7a [ar71xx] revert r27043 (#9513) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27343 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 19:52:57 +00:00
jow
c3c5977bfa [ar71xx] revert r27341, it introduce wrong behaviour for other models 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27342 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 19:15:45 +00:00
jow
0678f5f577 [ar71xx] turn status LED off if device finished initializing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27341 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 18:39:53 +00:00
kaloz
b76c8ead89 [avr32]: upgrade avr32 u-boot to 2011.06 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27330 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 11:32:01 +00:00
kaloz
43b45fe5d9 [avr32]: upgrade to 2.6.39.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27329 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 11:31:08 +00:00
kaloz
5bdb3e2cb7 [cns3xxx]: preliminary 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27328 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 08:15:48 +00:00
kaloz
7437ee4707 [target/generic/3.0]: add missing kernel symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27327 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 08:11:16 +00:00
nbd
ce9cff2576 fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27322 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 03:20:13 +00:00
juhosg
14ca52f672 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code 
The config option has been removed in 2.6.39.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27320 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-30 12:15:33 +00:00
hauke
0cca467832 brcm47xx: deactivate wndr3400 for now as this device will not boot 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27316 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 17:42:34 +00:00
juhosg
5c047f9906 ar71xx: merge 2.6.39 patches 
Also remove the old UART driver for ar933x.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27314 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:37 +00:00
juhosg
e70980e097 ar71xx: remove 2.6.37 support as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27313 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:36 +00:00
juhosg
d9b5b92778 ar71xx: remove 2.6.38 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27312 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:34 +00:00
juhosg
1c570d4d17 ar71xx: switch to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27311 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:33 +00:00
juhosg
da1bd2aad6 ar71xx: add 2.6.39 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27310 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:32 +00:00
juhosg
48cf86296e ar71xx: remove ar71xx_gpio_irq_set_type 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27309 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:30 +00:00
juhosg
47d06a3f16 ar71xx: add separate handlers for IP3 interrupts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27308 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:29 +00:00
juhosg
32852643ef ar71xx: use separate handlers for IP2 interrupts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27307 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:28 +00:00
juhosg
62be67eb01 ar71xx: remove useless irq_desc.status initializations 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27306 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:27 +00:00
juhosg
f9ffd498e1 generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27305 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:25 +00:00
hauke
ff1834fac5 brcm47xx: generate image to flash on Netgear WNDR3400. 
The image will not boot because serial flash support is missing this is only for experts.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27302 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 22:23:21 +00:00
hauke
6c4398bc6a brcm47xx: add initial support for devices with bcma bus. 
Ethernet and wifi are not working and this is highly experimental.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27301 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 22:21:57 +00:00
hauke
a89d3f1a9b kernel: refresh patches for kernel 3.0-rc5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27300 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 20:25:39 +00:00
hauke
6936562161 kernel: update ssb and bcma to linux-next next-20110628 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27299 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 19:33:50 +00:00
hauke
e2e4e12a9a kernel: update kernel to 2.6.39.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27298 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 19:30:58 +00:00
kaloz
62588ba2fa [cns3xxx]: ethernet cleanup and sata fix - thanks, Chris 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27297 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 06:54:20 +00:00
hauke
d44b8ff5e3 brcm47xx: update kernel to version 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27296 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 21:29:20 +00:00
hauke
7072b1e240 kernel: update ssb and bcma to linux-next next-20110627 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27295 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 21:28:40 +00:00
hauke
951d6d8330 brcm47xx: fix Linux-3.0 and fix clock rate detection. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27294 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 20:20:11 +00:00
hauke
85dd88a3c6 kernel: update ssb and bcma to linux-next next-20110627 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27293 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 20:18:49 +00:00
jow
697cd0b667 [geos] remove remaining uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27291 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 01:42:31 +00:00
florian
42b043fcf4 [x86] geos: deprecate uci-defaults files 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27287 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 22:05:10 +00:00
florian
8138343d87 [x86] alix2: add config files for bridging 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27286 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 22:05:05 +00:00
florian
4fa8e1979c [brcm63xx] remove gpiodev, prefer sysfs gpio 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27284 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 19:26:17 +00:00
nbd
e00ba06f78 ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27283 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 13:54:42 +00:00
nbd
40ad0e2ed9 ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27282 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 13:48:47 +00:00
florian
f0aa035693 [kernel] add missing linux-3.0 config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27269 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-24 11:43:30 +00:00
florian
cf43489095 [brcm63xx] register SSB sprom after ethernet devices 
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27258 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-22 12:32:03 +00:00
florian
80db4b51be [brcm63xx] fix tab damage in 141-led_count.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27254 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 20:52:58 +00:00
florian
07d9a1e199 [kernel] fix and make usable kmod-pcmcia-rsrc 
This module is also needed for e.g: kmod-bcm63xx-pcmcia

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27253 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 20:52:53 +00:00
hauke
b40c3fc29b kernel: refresh patches for kernel 3.0-rc4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27247 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 18:39:47 +00:00
florian
7954e2cc55 [brcm63xx] use macros to generate SPI registers table and switches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27246 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 10:05:51 +00:00
florian
d60ce1b40f [adm5120] fix usb mis-cleanup after r27162 (#9581) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27243 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-20 10:04:53 +00:00
jow
673103854c [x86] Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27241 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 23:05:21 +00:00
jow
7733d536b3 [PATCH] generic: Remove IPv6 depependency of bridge in 2.6.38+ 
Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is
enabled. Since the IPv6 module isn't exactly lightweight and bridge also
only needs a single function from IPv6, it's rather easy to create a
common "lib" module with a RCU pointer to the actual implementation, if
the IPv6 module is loaded (although slightly hackish).

The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27237 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 22:48:53 +00:00
florian
e13c1d256f [brcm63xx] dev-spi.c checks for running CPU, not board code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27236 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:46:00 +00:00
florian
be166690fa [brcm63xx] fixup patches after r27234 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27235 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:28:38 +00:00
florian
64c718f223 [brcm63xx] remove accidental bcm6345 related patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27234 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:16:59 +00:00
florian
ea57f00705 [brcm63xx] remove support for 2.6.37 and 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27233 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:14:22 +00:00
florian
df49c5b247 [brcm63xx] switch to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27232 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:12:45 +00:00
florian
2303389688 [cobalt] remove 2.6.35 and 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27230 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:09:40 +00:00
florian
900fe1bcc1 [ep93xx] remove pre 2.6.39 patches and config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27229 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:09:00 +00:00
florian
811d545260 [au1000] remove 2.6.37 patches and config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27228 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:07:26 +00:00
juhosg
8738d0666a ar71xx: cleanup AR933X UART driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27222 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 13:17:51 +00:00
juhosg
4a96046040 ar71xx: fix uart clock frequency for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27221 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 13:17:50 +00:00
hauke
e8526fc8bf brcm47xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27219 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-18 15:53:14 +00:00
hauke
2c1ed14849 kernel: update to kernel 2.6.38.8 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27218 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-18 15:52:15 +00:00
hauke
86a107e544 brcm47xx: add support for kernel 3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27217 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-18 15:24:44 +00:00
rwhitby
90632ae8aa ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27202 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-17 11:22:22 +00:00
florian
d440b026f6 [kernel] add missing USBIP_CORE item in config-3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27195 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-16 14:34:50 +00:00
florian
632a38eb50 [malta] allow any console to be used 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27193 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-16 14:34:44 +00:00
florian
bba43a8dab bcm63xx: Add support for Linux 3.0-rc3 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27192 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-16 14:34:40 +00:00
hauke
ed6be451a0 linux/generic: Add support for 3.0-rc3 
Also make linux identify itself properly as 3.0, not 3.0.0.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27191 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 21:31:01 +00:00
hauke
5d3c534673 bcm47xx: Remove kernel checks from image Makefile 
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27185 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 21:11:49 +00:00
jow
886975b7e5 [PATCH] 2.6.39.1: missing kernel symbols 
If you turn on I2C, you'll need this symbol defined.

Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27182 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 18:18:32 +00:00
nbd
9ec7437e17 add missing kernel config symbols for usb on powerpc 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27181 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 18:07:26 +00:00
jow
0d5a874445 [generic] backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27179 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 14:11:33 +00:00
jow
fb3339fc0d [generic] revert r26997, it does not apply against 2.6.36.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27178 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 13:51:57 +00:00
florian
72829489da [cobalt] switch to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27175 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-14 20:05:13 +00:00
florian
d78f71b371 [cobalt] fix diag.sh with qube2 front led 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27174 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-14 20:05:09 +00:00
florian
6f5d1f2104 [cobalt] resync kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27173 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-14 20:05:03 +00:00
blogic
00cb032d3c [lantiq] 
Fix for bug where the iniatialisation of the MAC data private strucure
is copied into the wrong location.

Ticket #9547

Signed-off-by: Conor O'Gorman <conor at dna.ie>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27172 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 22:37:23 +00:00
florian
d7f70f01a8 [uml] replace unfortify patch with a better one 
Thanks to Richard Weinberger for providing this patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27168 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 12:45:12 +00:00
juhosg
63dccaf23b ar71xx: use ar933x_uart.h in the AR933X serial driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27166 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 08:12:40 +00:00
juhosg
83e2548ec8 ar71xx: update early_printk code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 08:12:38 +00:00
florian
27e94101de [adm5120] cleanup files using checkpatch.pl 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-12 19:17:57 +00:00
blogic
5151e90913 [lantiq] 
* move patches around
* add basic support for gigaset sx76x


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27158 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-12 08:56:26 +00:00
acinonyx
3f2561bdea [ar71xx] Remove trailing spaces, convert spaces to tabs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27153 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-09 19:30:50 +00:00
blogic
eb72b14048 [ledtrig-netdev] 
we dont need 1024 bytes buffer. 128  bytes is enough.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27143 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-09 07:08:54 +00:00
blogic
a9c1e1b2b5 [atheros] 
* revert accidental config change


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-09 05:10:18 +00:00
blogic
0814097081 [lantiq] 
* fixes spi flash for ar9
* adds limited support for netgear dgn3500 (enough for others to start working with)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27137 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-08 17:57:55 +00:00
nbd
a6c1bd4558 ar71xx: override inittab to enable login on ttyATH0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27128 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-07 17:07:10 +00:00
florian
b5a33bb5d5 [ep93xx] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27114 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:14 +00:00
florian
29ba1eadaa [ep93xx] define UIMAGE for various rootfs targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27113 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:09 +00:00
florian
44bc580553 [ep93xx] use IMG_PREFIX for image name 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27112 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:04 +00:00
florian
81dcbabe94 [kernel] add more config symbols to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27111 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:00 +00:00
florian
16a2625fed [uml] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:26:54 +00:00
florian
4680c9125b [realview] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27107 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:36:09 +00:00
florian
ca71440af1 [malta] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27106 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:36:05 +00:00
florian
51e57076af [kernel] add some missing 2.6.39 config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27105 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:36:00 +00:00
florian
e056550af0 [kernel] update to 2.6.39.1 
patch from Peter Wagner

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27104 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:35:55 +00:00
juhosg
377e161817 ar71xx: setup wdt_clock for AR913X to avoid a kernel bug 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 12:30:10 +00:00
juhosg
7d535a19ed ar71xx: select the internal antenna by default on the ZCN-1523H boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27101 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 12:30:09 +00:00
florian
4fb824733a [au1000] update to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27090 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-02 13:45:20 +00:00
nbd
480dfda6ec Revert "ar71xx: only enable the rx engine after the link is up..." 
It messes up the DMA state when the link goes down

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27088 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 18:15:43 +00:00
juhosg
3db28f9561 ar71xx: init external_reset for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27083 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:30 +00:00
juhosg
1bab920361 ar71xx: add external_reset field to ath9k_platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27082 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:28 +00:00
juhosg
037092a862 ar71xx: init get_mac_revision on AR9330 rev 1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27081 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:27 +00:00
juhosg
03659f9521 ar71xx: add get_mac_revision to ath9k_platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27080 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:26 +00:00
juhosg
9657aff1ae ar71xx: export SoC revision 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27079 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:24 +00:00
kaloz
bd215a1b57 [cns3xxx]: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27078 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 07:24:41 +00:00
kaloz
e054e9a416 [cns3xxx]: fixup second led, patch from Chris 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27077 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 07:21:25 +00:00
nbd
1eeba399c6 ar71xx: add profile and image building code for wzr-hp-ag300h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27076 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 02:23:30 +00:00
nbd
50919ca9e2 ar71xx: add kernel support for the buffalo wzr-hp-ag300h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27075 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 02:23:26 +00:00
nbd
dcab6b06b2 fix a crash in mtd_concat when the .sync op is not implemented 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27074 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 02:23:22 +00:00
nbd
66a8e8ec8d m25p80: add the chip id for the winbond w25q128 chip 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27073 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 02:23:18 +00:00
kaloz
279fea2717 [cns3xxx]: fixup pcie clock, thanks Chris 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27072 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 23:55:33 +00:00
juhosg
269c6430d7 ar71xx: build images for the AP121 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27070 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:47 +00:00
juhosg
165010d573 ar71xx: add sysupgrade support for the AP121 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27069 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:45 +00:00
juhosg
5d12cb1277 ar71xx: add default network config for the AP121 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27068 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:44 +00:00
juhosg
92fa0b3f16 ar71xx: add support for the AP121/AP121-MINI reference boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27067 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:43 +00:00
juhosg
7c4adb453c ar71xx: register UART for the AR933X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27066 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:42 +00:00
juhosg
1c869e33cc ar71xx: add serial driver for the AR933X UART 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27065 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:40 +00:00
juhosg
5e832d5f35 ar71xx: add WMAC initialization code for the AR933X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27064 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:39 +00:00
juhosg
b33cedf6fa ar71xx: add ethernet initialization for the AR933X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27063 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:37 +00:00
juhosg
aa6b4cd97a ar71xx: enable USB support for the AR933x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27062 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:36 +00:00
juhosg
6f45adddfe ar71xx: add AR933x specific glue for ar71xx_device{start,stop} 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27061 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:35 +00:00
juhosg
c7eb38661b ar71xx: the watchdog uses the reference clock on the AR933x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27060 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:34 +00:00
juhosg
0570263dcb ar71xx: add AR933x specific glue code for IRQ initialization 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27059 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:32 +00:00
juhosg
771bbc30cf ar71xx: don't register 8250 UART on the AR933x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27058 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:31 +00:00
juhosg
4cae90b75b ar71xx: enable GPIO support for the AR933x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27057 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:30 +00:00
juhosg
046f6d9c97 ar71xx: add AR933x specific frequency initialization code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27056 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:29 +00:00
juhosg
9d012c4aae ar71xx: add AR933x specific early_printk support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27055 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:27 +00:00
juhosg
a5e8c5446f ar71xx: add preliminary support for the Atheros AR933x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27054 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:26 +00:00
juhosg
68169c24f2 ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2 
NETGEAR doesn’t produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.

This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.

There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27053 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:25 +00:00
juhosg
fc50c6a3b6 ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27051 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:22 +00:00
juhosg
eaa759a8e5 ar71xx: Fix header offset for newer WRT160NL models 
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27049 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:20 +00:00
juhosg
5b9155beba ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27048 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:19 +00:00
juhosg
92e4bfb535 ar71xx: reduce the size of the squashfs-4k binaries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27047 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:18 +00:00
juhosg
bd8a2aaee9 ar71xx: initialize is_clk_25mhz field for AR9340 WMAC 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27045 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:15 +00:00
juhosg
c772123439 ar71xx: sync ath9k_platform_data.h with compat-wireless 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27044 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:14 +00:00
juhosg
ee7a116328 ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27043 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:13 +00:00
juhosg
20d6650643 ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27042 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:12 +00:00
juhosg
75e1476cce ar71xx: ag71xx: make ring sizes configurable via ethtool 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27041 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:10 +00:00
juhosg
a137dec884 ar71xx: ag71xx: prepare to make ring sizes configurable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27040 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:09 +00:00
juhosg
940317dc35 ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define 
Reported-by: Dave Täht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27039 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:07 +00:00
nbd
10153f8ada x86: add additional companion chip drivers to alix2 and geos 
Add the MFGPT high precision timers, and integration into the schedule (clock events).

Use OHCI, not UHCI usb module.

Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27038 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 16:57:05 +00:00
nbd
17982e54d4 x86: remove pata-amd driver from generic x86 images, add addition cs553x modules 
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.

Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27037 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 16:57:01 +00:00
mirko
0ed739e5f4 purge out CONFIG_CRYPTO* symbols out of target specific kernel configs 
since OpenWrt is taking care of them

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27036 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 09:47:30 +00:00
nbd
debcf79f90 ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27035 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-30 23:08:01 +00:00
nbd
20aef6d6fc ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27034 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-30 23:07:57 +00:00
kaloz
c8ba3d408b [cns3xxx]: upgrade to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27030 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-30 13:55:34 +00:00
blogic
fd8ccf9c65 [lantiq] 
* backport 2.6.8 patches to .39 / .32.33
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27026 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-29 21:19:26 +00:00
florian
50d9b77c8c bcm63xx: Add support for 2.6.39 
Add support for Kernel 2.6.39. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27019 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-27 09:54:52 +00:00
florian
4ffe2a8029 bcm63xx: Add support for 2.6.38 
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27018 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-27 09:54:48 +00:00
florian
540c634db7 [brcm63xx] fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27014 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-26 13:53:00 +00:00
florian
a18e55e2d0 [brcm63xx] renumber patches accordingly 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27013 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-26 13:52:56 +00:00
florian
ba86e7162d [brcm63xx] renumber board patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27012 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-26 12:09:15 +00:00
hauke
46a821162a kernel: exportfs: reallow building as a module 
It was originally tristate, but was changed to bool to prevent a build
breakage in an earlier patch revision (for a new syscall). The actual
commit[1] changed it in a way this isn't needed anymore, but
accidentially left the EXPORTFS change in. There's no reason for it
not being buildable as a module, so changing it back to tristate is
fine.

see: https://patchwork.kernel.org/patch/812832/

Thank you Jonas Gorski for the patch. 


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27011 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-25 20:57:13 +00:00
hauke
31c95ff1eb kernel: generic: Update 2.6.39 to final 
* Add missing config symbols
* Update package/kernel for 2.6.39

CONFIG_BT_L2CAP=y and CONFIG_BT_SCO=y are set to build them into the bluetooth module.

Thank you Jonas Gorski for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27010 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-25 19:51:40 +00:00
hauke
c77971e8b4 kernel: some updates for kernel 2.6.39 
* add md5sum for kernel
* add some missing config symbols
* add some ssb patches to make compat-wireless compile

Thank you Peter Wagner for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27009 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-25 19:32:00 +00:00
hauke
a3c9e2fe7a brcm47xx: initial 2.6.39 support for brcm47xx 
Thank you Peter Wagner for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27008 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-25 19:27:08 +00:00
florian
97d0245acb [kernel] fix mtd warnings 
Fixes for the following warnings:

drivers/mtd/devices/block2mtd.c: In function '_open_bdev':
drivers/mtd/devices/block2mtd.c:272:3: warning: ISO C90 forbids mixed declarations and code
drivers/mtd/devices/block2mtd.c: In function 'add_device':
drivers/mtd/devices/block2mtd.c:399:13: warning: assignment discards qualifiers from pointer target type

In the case of 442-block2mtd_probe.patch, it's not until the insertion of a executable statement before the definition that causes a warning, so I've chosen to resolve the issue here by splitting the definition and the initialization into a definition and a statement (and assignment) instead.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27007 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-25 19:16:58 +00:00
hauke
744a7f4397 brcm47xx: remove old kernel 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27006 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-25 18:05:54 +00:00
hauke
82c6aea1dc brcm47xx: fix partition layout on SimpleShare devices. 
The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here.

This fixes #9323

Thank you Will Holmes for the patch.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27005 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-25 17:46:34 +00:00
hcg
b6fd9c3452 [generic] Clean up patch not applying 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26997 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-24 10:00:36 +00:00
florian
65302aa5bc [brcm63xx] add support for BT Voyager 2110 (#8810) 
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26959 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-20 10:06:25 +00:00
florian
233a4cab5d [brcm63xx] add support for DSL-2640B rev B2 
Signed-off-by: Adrian Feliks <mexit@o2.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26958 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-20 10:06:22 +00:00
florian
c86364399e [brcm63xx] refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26957 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-20 10:06:18 +00:00
florian
547875d0c9 [brcm63xx] add support for D-Link DVA-G3810BN/TL 
This patch adds support for D-Link's DVA-G3810BN/TL product.

Signed-off-by: Roman Dumycz <roman@secureas.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-20 10:06:15 +00:00
florian
8f5d6564e0 [kernel] refresh 2.6.37 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26955 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-20 10:06:11 +00:00
florian
3523230780 [brcm63xx] add support for BT Voyager 2500 (#9070) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26954 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-20 10:06:07 +00:00
florian
552666835d [brcm63xx] add support for USR9108 LEDs (#9372) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26953 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-20 10:06:04 +00:00
florian
dd4c75bad5 [ar7] add GT701 LEDs support (#9382) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26952 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-20 10:06:00 +00:00
cshore
d621e2d0b6 Simple typo for kmod- prefix in alix2 target makefile. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26945 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-19 04:29:40 +00:00
hcg
bd17423a6c [omap35xx]: Remove override of max80211.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26936 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-18 12:43:54 +00:00
hcg
ca8c3e1238 [omap35xx] Move beagleboard base-files to beagleboard sub-target, remove unused mac80211.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26932 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-18 11:50:36 +00:00
matteo
005a65e01d ar71xx: don't probe the LAN PHY 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-17 11:15:24 +00:00
matteo
483991c363 ar71xx: detect link on LAN ports 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-17 11:12:56 +00:00
blogic
9f3b548077 [x86] 
* adds support for Artec Thincan

Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26919 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-17 10:35:14 +00:00
nbd
5478db1fd5 kernel: backport some ssb changes to support a mac80211 update 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26911 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-16 21:50:20 +00:00
jow
c38b69687a [generic] remove an accidentally copied comment from the option.ko device patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26908 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-15 21:28:12 +00:00
jow
4ce6c0f0f2 [generic] add definitions for Alcatel X220D and Huawai E173s to option.ko (#9422) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26906 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-15 19:17:31 +00:00
hauke
95ef6e1d42 kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches 
Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26905 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-15 17:23:02 +00:00
matteo
511dea0dac ar71xx: add link detection on Ubiquiti devices WAN port 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26891 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-14 23:31:50 +00:00
matteo
51053e7640 use correct macros and frame size in ag71xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26890 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-14 23:10:06 +00:00
matteo
0cbd6d9057 ar71xx: cosmetic fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26889 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-14 23:08:00 +00:00
hcg
b72f8806e0 [omap35xx]: Add new defconfig and profile for es variant 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26884 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-13 11:49:52 +00:00
hcg
668038203f [omap35xx] Squash uids 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26883 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-13 10:36:39 +00:00
cshore
806e48f8a2 [x86] Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26882 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-13 07:23:11 +00:00
cshore
0118ba5ae3 Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. 
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-13 06:08:49 +00:00
cshore
33f2d48878 This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. 
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26879 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-13 06:06:42 +00:00
florian
4b838055c4 bcm63xx: Add support for the T-Home Speedport W 303V 
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-11 13:34:14 +00:00
florian
4b5057ec0f bcm63xx: Update support for the DSL-274xB revision C 
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26876 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-11 13:33:50 +00:00
florian
65b306d01e bcm63xx: Accept any led with power in its name as power led 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26875 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-11 13:33:45 +00:00
florian
a49f5b3910 bcm63xx: Decouple Board ID and image name for fixup 
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-11 13:33:41 +00:00
florian
fcef96a488 [ep93xx] switch to 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26873 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-11 13:33:34 +00:00
florian
21f2f27579 [kernel] add missing 2.6.38 touchscreen config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26872 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-11 13:33:30 +00:00
blogic
10f03e0475 [PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC 
This patch adds 802.1Q VLAN support for the ADM6996M chip.

The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.

The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].

Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt

Signed-of-By: Peter Lebbing <peter@digitalbrains.com>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-09 15:21:58 +00:00
juhosg
b500b67652 ar71xx: populate LED3 on the JA76PF board 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26862 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:51 +00:00
juhosg
b3a8c8a5ce ar71xx: add uci config for the WLAN LED on the WRT160NL 
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:49 +00:00
juhosg
a1c5a3da98 ar71xx: use phy0tpt trigger for the WLAN LEDs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:48 +00:00
juhosg
5b6a159d03 ar71xx: remove superfluous fifo_cfg overrides 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26859 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:46 +00:00
thepeople
318f8f9eeb [PATCH] ipv6: restore correct ECN handling on TCP xmit 
Thanks Dave Taht

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26858 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 17:08:06 +00:00
juhosg
bb14a2f07c ar71xx: ag71xx: make switch register access atomic 
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 16:32:53 +00:00
juhosg
0511a7adf1 ar71xx: ag71xx: fix section mismatch warnings 
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 13:30:36 +00:00
juhosg
14088891b0 ar71xx: ag71xx: fix build error if debugfs is enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26854 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 13:30:26 +00:00
hauke
26205d18e8 brcm47xx: update patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26846 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:49:17 +00:00
juhosg
e5061b1935 ar71xx: ag71xx: add debugfs entry for [rt]x_ring 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26845 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:34 +00:00
juhosg
5155342ee7 ar71xx: ag71xx: add timestamps to ag71xx_buf 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:28 +00:00
juhosg
5e10b16d95 ar71xx: ag71xx: use dynamically allocated buffer for napi_stats 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:26 +00:00
juhosg
f6816e49d9 ar71xx: ag71xx: use debugfs_remove_recursive 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26842 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:25 +00:00
juhosg
193e04ebee ar71xx: override wmac device name for the AR934x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 09:23:32 +00:00
florian
663cf912af [ar7] remove useless patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26837 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-06 12:37:40 +00:00
florian
9db1daeb99 [kernel] fill maintainer infos for a couple of targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26836 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-06 12:37:36 +00:00
florian
2a36c4c1d0 [malta] update to 2.6.38.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26833 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-05 16:35:44 +00:00
florian
fd174f110c [kernel] add missing 2.6.38 symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26832 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-05 16:35:40 +00:00
hauke
a921520508 brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26829 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-05 14:05:21 +00:00
hauke
6a2f5043e3 brcm47xx: fix typo in patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26828 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-05 13:18:35 +00:00
acoul
348cbe4bd3 linux/ar71xx: add some missing symbols for nand/yaffs targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26827 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-05 07:19:46 +00:00
acoul
65c914d861 linux/generic: port yaffs to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-04 09:35:06 +00:00
acoul
55090a4f27 linux/rb532: use kernel and initramfs tags on image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26817 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-04 08:47:00 +00:00
jow
15f719295e [PATCH] geos: remove unneeded modules 
The via-sata and gpio-nsc modules are both unneeded on the Geos platform.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26811 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-03 21:18:12 +00:00
florian
4c6cfc925c [uml] update to 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-02 07:57:25 +00:00
nbd
cbc75e81c2 cns3xxx: remove one of the dma cache patches, it causes a regression in the ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26802 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-02 00:28:30 +00:00
hauke
374bb82f67 brcm47xx: add fallback sprom for pci devices without an own sprom. 
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an 
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26801 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-01 20:28:35 +00:00
nbd
f7215e23eb cns3xxx: fix missing and incomplete cache flushes on DMA cache sync for cpu - fixes some issues with ath9k 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26797 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-01 15:53:56 +00:00
nbd
118a9c5154 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26779 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-28 21:27:42 +00:00
nbd
dc218ac48d ar8316: automatically detect whether port4 is used as PHY or as a switch port 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26778 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-28 21:27:37 +00:00
nbd
8220523bad ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26777 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-28 19:30:49 +00:00
nbd
bfce59f539 ar8216: support AR8316 rev 0 devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26776 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-28 19:30:43 +00:00
acoul
98a395304f linux/atheros: add 2.6.38 preliminary support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26772 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-27 17:18:03 +00:00
nbd
43ac860de1 swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK 
SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed
in 2.6.39, so replace it with DEFINE_SPINLOCK().

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26770 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-26 23:05:29 +00:00
acoul
15b4a061a0 linux/adm5120: update wget2nand script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26748 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-21 13:18:33 +00:00
acoul
b7a26a735b linux/ar71xx: update wget2nand script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26747 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-21 12:38:25 +00:00
acoul
dfba2f5fb1 linux/ar71xx: add 2.6.38 preliminary support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26746 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-21 11:45:23 +00:00
nbd
08b7e3152b uml: fix the kernel config name override 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26715 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 21:47:49 +00:00
nbd
5530235576 x86: remove 2.6.35 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:39:50 +00:00
nbd
76383a0da0 brcm63xx: remove patches/configs for 2.6.35 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:39:46 +00:00
nbd
e8290adf62 au1000: remove patches/configs for 2.6.35 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26708 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:39:42 +00:00
nbd
e2329f34d0 ar7: remove patches/configs for old kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26707 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:39:38 +00:00
nbd
fb9db09832 adm5120: remove patches/configs for unused kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:39:32 +00:00
nbd
8b102012a0 rootfs_split: Allow using MTDPART_OFS_APPEND macro for offset of rootfs. 
Use offset from struct mtd_part instead of struct mtd_partition for defining
the new partitions. This enables the usage of MTDPART_OFS_APPEND macro in
struct mtd_partition.

Signed-off-by: Jochen Friedrich <jochen@scram.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:32:28 +00:00
nbd
d399ceaa8f Remove 2.6.35. It's not used anymore. 
Signed-off-by: Jochen Friedrich <jochen@scram.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26704 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:32:21 +00:00
cshore
530f098176 [brcm63xx] Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 01:15:47 +00:00
nbd
126814ad2a ixp4xx: backport an upstream commit to fix gspca compile errors triggered by the buildbot 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26698 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-16 21:30:48 +00:00