qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 20:09:55 +02:00
Code
24,925 Commits 13 Branches 0 Tags 117 MiB
50093aed33
Commit Graph

10179 Commits

Author SHA1 Message Date
kaloz
50093aed33 [cns3xxx]: split the i2c patch, merge the retry fixup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34167 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 08:21:38 +00:00
blogic
99d46724d1 [atheros] move redboot boardconfig patch into target folder 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34166 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 07:56:37 +00:00
kaloz
c9c06656ce [ixp4xx:] add support for the Tonze AP-422/425 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 21:04:30 +00:00
kaloz
9e71e83d05 refresh patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34164 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 21:03:52 +00:00
kaloz
a47b8e3270 [cns3xxx]: generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34163 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 20:57:04 +00:00
luka
00f29ce9a4 cns3xxx: convert dwc_otg patches to files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 20:03:58 +00:00
luka
133d66da06 cns3xxx: convert ethernet patches to files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34161 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 20:03:56 +00:00
jogo
f9aaf2e1ab bcm63xx: switch to 3.6.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34160 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 19:57:17 +00:00
kaloz
06e73c8149 [ixp4xx]: move fixed mapping of internal devices into vmalloc region 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34158 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 19:29:27 +00:00
florian
6054f4542f [au1000] advertise squashfs feature 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34157 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 19:26:54 +00:00
florian
adf0ebdf2f [au1000] add support for Linux 3.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34156 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 19:26:50 +00:00
florian
2217c75c0f [au1000] split kernel config between generic, au1500 and au1550 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34155 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 19:26:44 +00:00
florian
e58dc6f93a [ar7] add support for Linux 3.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34154 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 18:41:09 +00:00
florian
cfe387e351 [ar7] move files directory to files-3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34153 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 18:40:48 +00:00
hauke
d82f4384d6 brcm47xx: remove ssb-gige package 
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34150 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 17:30:33 +00:00
florian
b5e39be3da [ar7] generate image for AC49x 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34149 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:39 +00:00
florian
942c29a052 [ar7] create AC49x subtarget 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34148 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:34 +00:00
florian
cdbc741abf [ar7] create generic subtarget 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34147 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:29 +00:00
florian
b8563c946c [ar7] detect AC49x flash partitions 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34146 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:22 +00:00
florian
b95ed4ea89 [ar7] support AC49x bootloader environment 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34145 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:14 +00:00
florian
ae5a6a7d59 [ar7] add AudioCodes AC49x platform support to kernel 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34144 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:09 +00:00
florian
078aa440fd [ar7] free memory below kernel offset 
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34143 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:00 +00:00
jow
f1ba8dbbc9 x86/generic: don't disable usbfs (#12452) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34139 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-10 23:28:58 +00:00
jogo
795c0046ce bcm63xx: fix compilation with kmod-ohci enabled with 3.6 
Fixes the following error:

drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34138 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-10 22:10:47 +00:00
jogo
7edabb16a1 bcm63xx: add two missing usb patches to 3.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34137 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-10 19:59:16 +00:00
jogo
68248250aa bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34136 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-10 19:59:07 +00:00
kaloz
42fc31c396 cns3xxx: clean up pcie patches 
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches
 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34132 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-09 21:37:54 +00:00
blogic
50d37a89fe [lantiq] add more profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34131 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-09 19:26:58 +00:00
blogic
03110d670c [lantiq] a few more dts files (WIP) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34130 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-09 19:26:43 +00:00
blogic
b6713eceb3 [lantiq] add mtd split and atm patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34129 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-09 19:26:30 +00:00
nbd
9f30d0c6bb x86: use $(strip) for the at_keyboard check 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34127 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-09 10:53:36 +00:00
nbd
81d8280c93 x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-09 10:19:51 +00:00
juhosg
7b9dfebde4 generic: sanitize deps_initramfs list 
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:

/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
make[5]: *** [usr] Error 2

Fix it by removing such filenames from the
deps_initramfs list.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-09 09:07:29 +00:00
luka
a8e4ddd6db cns3xxx: exit from laguna late_initcall if not running on laguna board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34120 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-08 11:31:56 +00:00
kaloz
42954b7559 cns3xxx: add PPS support for laguna 
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support.  This patch adds kernel support (statically) and adds
the platform data in laguna board support.
 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34115 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-08 05:42:31 +00:00
kaloz
909210ca4e [cns3xxx]: fixup symbol selection 
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34114 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-08 05:40:34 +00:00
luka
1a061108bc cns3xxx: fix coding style in board script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34113 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-07 23:12:06 +00:00
blogic
9601fbbb43 [ramips] adds fon20n profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34112 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-07 20:26:31 +00:00
blogic
a7d3fc489a ramips: use kernel 3.6.6 
## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34111 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-07 20:26:21 +00:00
blogic
4812414648 ramips: add HAVE_CLK to Kconfig on all ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-07 20:26:04 +00:00
blogic
814d56421b ramips: add linux-3.6 configuration for ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/rt288x/config-3.6
 create mode 100644 target/linux/ramips/rt305x/config-3.6
 create mode 100644 target/linux/ramips/rt3883/config-3.6

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34109 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-07 20:25:55 +00:00
blogic
d3e1822b67 ramips: port patches to linux-3.6 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
 create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
 create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
 create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
 create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
 create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
 create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
 create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
 create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
 create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
 create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34108 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-07 20:25:34 +00:00
jogo
d336a61384 bcm63xx: Enable endian check support for ath9k pci fixup. 
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34105 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-07 09:01:03 +00:00
kaloz
61c919373e [ixp4xx]: fixup typos in the compex patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34104 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-07 07:51:24 +00:00
jogo
e1696ca671 linux: export bcm963xx_tag.h to userspace 
Export bcm963xx_tag.h so mtd can use it without using kernel includes.

Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
 from original location, refresh patches, use  a more matching patch
 number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34103 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-06 15:21:46 +00:00
luka
1cce3e937d cns3xxx: refresh kernel config file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-06 11:16:43 +00:00
luka
e0dd91dd95 cns3xxx: use files directory 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34101 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-06 11:16:41 +00:00
blogic
eb5c7edbb6 [lantiq] add OWRTDTB marker patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34100 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-06 10:39:43 +00:00
blogic
d33fedaf9c [lantiq] add support for arv7525 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34097 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-06 07:38:24 +00:00
kaloz
019f172430 [cns3xxx]: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34095 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-06 05:45:12 +00:00