The rdate applet proved to be too unreliable to obtain the current time on boot:
- public time servers are rare and often unreachable or overloaded
- rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions
- the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations
- the time protocol as specified in RFC 868 is considered obsolete
This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly.
The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or
by clearing the timeserver list in /etc/config/system.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28612 3c298f89-4303-0410-b956-a3cf2f4a3e73
Multiple IPv6 addresses should be handled with alias sections
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28240 3c298f89-4303-0410-b956-a3cf2f4a3e73
If a user invoked /sbin/ifup to bring up an interface, the setup used to fail
in case of wireless networks tied to a non-bridged interface definition.
Likewise, the bringup of "lan" in the default configuration will reinitialize
the bridge but do not re-join the wireless network to it, requiring an extra
call to /sbin/wifi (which might not be possible anymore due to a severed link
if connected wirelessly).
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.
The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.
Solves #9763.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27720 3c298f89-4303-0410-b956-a3cf2f4a3e73
- option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz
- option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz
This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan.
Fixes ticket #8699.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27653 3c298f89-4303-0410-b956-a3cf2f4a3e73
eliminates unnecessary flash write cycles at every boot
patch by Peter Wagner (tripolar)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27127 3c298f89-4303-0410-b956-a3cf2f4a3e73
Hi,
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:
# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
with this patch you can also execute it with:
sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.
Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.
Regards, Manuel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26930 3c298f89-4303-0410-b956-a3cf2f4a3e73
when using an external toolchain the base-files package copies libc, libgcc and
others from the library directory.
The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"
Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.
Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.
--- Message Snippet ---
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libnss_files.so.*': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libresolv-*.so': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libresolv.so.*': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libuClibc.so.*': No such file or directory
make[2]: *** [/home/user/Desktop/code/meetwise/openwrt/bin/at91/packages/libc_-68_at91.ipk] Error 1
make[2]: Leaving directory `/home/user/Desktop/code/meetwise/openwrt/package/base-files'
make[1]: *** [package/base-files/compile] Error 2
make[1]: Leaving directory `/home/user/Desktop/code/meetwise/openwrt'
make: *** [package/base-files/compile] Error 2
--- /Message Snippet/ ---
To fix this unwanted behaviour I added an extra 'exit 0' to each for-loop and
make ignores non-existing files as before.
Signed-off-by: Sven Bachmann <dev@mcbachmann.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26623 3c298f89-4303-0410-b956-a3cf2f4a3e73
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26483 3c298f89-4303-0410-b956-a3cf2f4a3e73
So far, we are setting the bridge interface up before having added any
bridge interface ports. This results in the bridge assigning a random
mac address to its bridge interface and therefore IPv6 assigning a
matching link local address to the bridge interface as soon as the
bridge interface is up. After adding the first bridge port interface,
the bridge's mac address is reset correctly, however the IPv6 link
local address stays the same.
This commit ensures that we are at least having the IPv6 link local
address of the first interface added to the bridge instead of a random
one.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26426 3c298f89-4303-0410-b956-a3cf2f4a3e73
saves a few kb and gets rid of unused not exported functions as well
should also improve the reliability of mklibs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25800 3c298f89-4303-0410-b956-a3cf2f4a3e73
In uClibc 0.9.32 as well as recent versions of glibc and eglibc, librt
depends on libpthread.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25548 3c298f89-4303-0410-b956-a3cf2f4a3e73
During the first OpenWrt boot after a clean flash (when the jffs2
partition is not yet initialized) tmpfs is used instead of the usual
jffs2 overlay filesystem. If this tmpfs is mounted with default
options, all directories created there (/etc, /etc/config, other
subdirectories in /etc) get permissions 1777 by default, and these
permissions then persist in the created jffs2 at least until
subsequent sysupgrade. Mounting tmpfs with mode=0755 fixes the
permission problem.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23906 3c298f89-4303-0410-b956-a3cf2f4a3e73
- add sysupgrade support for keepfile hints
* introduces /lib/upgrade/keep.d/ for per-package keepfile lists
* introduces /etc/sysupgrade.conf for user defined keepfile hints
- prime /lib/upgrade/keep.d/base-files-essential to keep sysupgrade usable for images without opkg
- change sysupgrade to build the keepfile list from /lib/upgrade/keep.d/, /etc/sysupgrade.conf and
opkg list-changed-conffiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23258 3c298f89-4303-0410-b956-a3cf2f4a3e73
