1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-18 08:35:55 +02:00
Commit Graph

12 Commits

Author SHA1 Message Date
juhosg
1a883422c6 ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:43:34 +00:00
juhosg
b2d27833af ramips: allow USB
The current defaults for ramips rt305x does not allow the USB
subsystem to be selected/built.

This patch is just a small step in that direction.

Signed-off-by: Luis Correia <luis.f.correia@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:42:07 +00:00
juhosg
ef0f04cf25 ramips: add support for Sparklan WCR-150GN board
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-15 09:43:07 +00:00
juhosg
237bd79c54 ramips: sync 2.6.32 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:10 +00:00
juhosg
501e9e372c ramips: enable image commandline hack and cmdline partition parsing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20798 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 17:47:20 +00:00
juhosg
08ce1c443c ramips: sync kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 21:24:05 +00:00
nico
8fe94a14fe do *not* enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370])
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-11 09:50:11 +00:00
kaloz
0b86ea3caf clean up handling of some kernel symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-11 09:33:16 +00:00
kaloz
80f663be76 re-sort all target and subtarget config files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-11 08:55:15 +00:00
juhosg
bbd6ea8213 ramips: register gpio buttons on the DIR-300 revB board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:44 +00:00
juhosg
1284f885f3 ramips: add common gpio-buttons device
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:20 +00:00
juhosg
c6fd9710b6 ramips: add preliminary support for 2.6.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-26 09:57:38 +00:00