qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 15:25:20 +02:00
Code
19,746 Commits 13 Branches 0 Tags 117 MiB
69f9eb90f8
Commit Graph

7186 Commits

Author SHA1 Message Date
juhosg
84ea49f558 ar71xx: populate LED configuration for WZR-HP-G300NH 
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24642 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:09:57 +00:00
hauke
83e00dce42 brcm47xx: add ssb debug option. 
This fixes a problem with wrt350n. 
It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS"

Thank you sn9 for fixing this problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:35:59 +00:00
hauke
22d5936ba2 brcm47xx: add some missing pci ID for tg3 driver 
Broadcom removed these pci id, but at least the wrt350n has a Ethernet
controller with a pci id of 14e4:1676

Thank you sn9 for fixing this problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24625 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:31:05 +00:00
hauke
ff51b55992 brcm47xx: this patch went upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:26:55 +00:00
juhosg
2427a1a5f9 ar71xx: add wlan led for the TL-WR941ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24612 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 19:55:50 +00:00
juhosg
786449614f ar71xx: UBNT M-Series MAC address fix 
UBNT M-Series devices have 2 MAC addresses in board data.
Fix is to use both entries from board data instead of one entry.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24611 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 19:55:47 +00:00
kaloz
7a9fbd9d70 revert r24604 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 12:24:27 +00:00
acoul
c86e814be4 target/linux: clean up non generic & obsolete kernel options for 2.6.36, 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 12:15:46 +00:00
juhosg
5270be5f80 ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24569 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 18:01:04 +00:00
juhosg
6cc1945af5 ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 18:01:00 +00:00
blogic
d6de09a810 [lantiq] 
* make the usb gpio configurable
* 105-header_xway.patch has a corrupt line count in it


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 13:02:49 +00:00
juhosg
c4174021ac ramips: remove 2.6.3[24] support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:31 +00:00
juhosg
a12045ff00 ramips: switch to 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:29 +00:00
juhosg
779b986847 ramips: handle OTG interrupt on the RT305x SoC 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:25 +00:00
kaloz
26090b8684 [sparc]: bump kernel version, add MAINTAINER entry 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24559 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 07:58:24 +00:00
kaloz
386183ac6e add plemininary ultrasparc support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24558 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 07:57:22 +00:00
hcg
391e5d3423 [gumstix] Update package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24544 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 12:59:22 +00:00
jow
75f4300764 [kirkwood] enable mach support for OpenRD Base and OpenRD Client (#8417), spare the rest 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 10:06:40 +00:00
nbd
574f469e14 base-files: use shutdown instead of stop when the system goes down (patch by tripolar) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 08:01:21 +00:00
blogic
18a076fccd [lantiq] adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-12 22:57:16 +00:00
hauke
9f96922892 kernel: update kernel versions 
Update kernel 2.6.32.26 to 2.6.32.27
Update kenrel 2.6.36.1 to 2.6.36.2


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-11 16:07:21 +00:00
juhosg
29d3358e2b ar71xx: add missing files for the JA76PF board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 19:55:28 +00:00
cshore
636113691a [brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24442 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 18:59:58 +00:00
juhosg
9bdc5b83af ar71xx: add support for the jjPlus JA79PF 
Patch-by: Cezary Jackiewicz

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:51 +00:00
juhosg
ddbca99fbc ar71xx: add support for the TP-LINK TL-MR3220 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:48 +00:00
juhosg
c7e80fcfbb ar71xx: add default network configuration file for the TL-MR3420 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24437 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:40 +00:00
nbd
c5d8ec2df5 ar71xx: do not throw compile errors if the nbg460n uboot is not selected 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24426 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 16:07:27 +00:00
juhosg
12e58b40f8 ar71xx: select u-boot for the NBG460N in the Default/Minimal profiles as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24421 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 15:17:08 +00:00
juhosg
680d895a87 ar71xx: add nbg460n image generation 
This adds image generation for NBG460N/550N/550NH boards.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 15:17:03 +00:00
acoul
da5f577b16 linux/generic: update & refresh 2.6.36 & 2.6.37. (closes #8324) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24370 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 21:20:40 +00:00
kaloz
ca1f565dd9 add optimization to Freescale targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24341 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 11:27:06 +00:00
juhosg
602f2d5e4f ramips: ramips_esw: add more definitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24340 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:33 +00:00
juhosg
ec52e89b08 ramips: ramips_esw: add helper function to set pvid 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24339 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:28 +00:00
juhosg
4059133e7d ramips: ramips_esw: add helper function to set vlan members 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24338 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:25 +00:00
juhosg
9e9816322c ramips: ramips_esw: add helper function to set VLAN id 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:22 +00:00
juhosg
293e4ff8cc ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24336 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:16 +00:00
juhosg
8b6afc3a6a ramips: ramips_esw: use rt305x_esw prefix in function names 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24335 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:14 +00:00
juhosg
808e953c0a ramips: ramips_esw: coding style cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24334 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:12 +00:00
juhosg
39deae4b99 ramips: ramips_esw: add defines for switch register offsets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24333 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:07 +00:00
juhosg
1600b801ec ramips: ramips_esw: don't touch GPIO_PURPOSE register 
It must have been set by the board initialization code.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24332 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:04 +00:00
juhosg
bc4cb1b39f ramips: ramips_esw: convert it to be a platform driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:00 +00:00
juhosg
a3373ca948 ramips: ramips_esw: move hardware initialization into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24330 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:14:58 +00:00
juhosg
1fcc0bf36c ramips: ramips_esw: use a private structure for the functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24329 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:14:54 +00:00
kaloz
fa9c65f417 ethernet driver fixup for ppc4xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24328 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 08:59:31 +00:00
cshore
deb8dba13c [brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24316 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:31 +00:00
cshore
a2e7591047 [brcm63xx] Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24315 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:28 +00:00
cshore
860ae4cdbc [brcm63xx] Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24314 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:24 +00:00
cshore
94d30e3699 [generic] flash_chips: Added Macronix MX29LV640T Flash Chip support previously mistakenly added to brcm63xx. Thanks blunoise. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24313 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 19:45:08 +00:00
cshore
87b570ee61 [brcm63xx] patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24310 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 17:32:29 +00:00
cshore
c73f40600d Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T." 
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.

It belongs in generic not brcm63xx.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24308 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 17:02:31 +00:00
cshore
eea5cc41dc [brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. 
Thanks blunoise

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24307 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 16:42:23 +00:00
cshore
6e4ddb80d8 [brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24305 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:54 +00:00
cshore
332453076d [brcm63xx] patches: Refreshed patches after led_count 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24304 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:51 +00:00
cshore
164cf26c5b [brcm63xx] board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24303 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:47 +00:00
cshore
27a7d97c15 [brcm63xx] Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24302 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:41 +00:00
hauke
a08050a048 kernel: fix cryptodev with kernel >= 2.6.35 
The fix is from http://sourceforge.net/mailarchive/forum.php?thread_name=20100906035717.GA7562%40mcafee.com&forum_name=ocf-linux-users

Thank you tripolar for reporting the issue and finding a solution for it.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24286 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 17:01:10 +00:00
cshore
91050b8f9f [brcm63xx] base-files: Added the preinit information for reset button and preinit indication led, and preinit interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24276 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 06:46:03 +00:00
cshore
d2ca272aee [brcm63xx] board definition: Fixed CPVA642 LED definitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24275 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 06:45:57 +00:00
cshore
cbe5202762 [brcm63xx] board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24274 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 04:31:23 +00:00
cshore
87689d1064 [bcm63xx] base-files: Added network defconfig because board only has one ethernet (4-port switch) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24273 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 02:01:08 +00:00
juhosg
5d6fe3e144 ramips: add support for 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24270 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 20:14:38 +00:00
juhosg
50fe7cc694 ramips: default profile fix 
Fix package names in default profiles.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24269 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 20:14:35 +00:00
juhosg
8b65736401 ramips: use tabs instead of spaces in mach-f5d8235-v2.c 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24268 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 20:14:30 +00:00
hauke
4b7e8fd5aa brcm47xx: do not read from CFE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24267 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 19:20:26 +00:00
hauke
2308d83efb brcm47xx: backport patch from kernel 2.6.37 
Backport patches from r24162
  brcm47xx: reorder patches like they were commitet upstream


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24266 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 19:19:50 +00:00
hauke
2c5bea6134 brcm47xx: use on common files dir 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24264 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 18:34:58 +00:00
kaloz
e82b1d80fc [target/mpc85xx]: preliminary support for Freescale MPC85xx based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24259 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 11:38:59 +00:00
nbd
cb875ff79e ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24236 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-04 01:32:15 +00:00
kaloz
56f5e0b05a [mpc83xx]: remove unused kernel versions, make 2.6.36 the default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24223 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-03 09:19:52 +00:00
hauke
08e8737994 brcm47xx: Add edimax PS1208mfg support 
Thank you clemvangelis for the patches. (closes #7672)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-02 21:27:54 +00:00
jow
db07bdac3e [ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24215 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-02 20:19:55 +00:00
juhosg
09a8407a2d ar71xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24210 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-01 18:40:01 +00:00
juhosg
f21a26a90b generic: yet another missing config symbol for 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24208 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-01 18:39:55 +00:00
jow
848e1c833e [ar71xx] add a new image for the TEW-652BRP which can be used with the bootloader recovery option 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24196 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-30 02:04:57 +00:00
jow
291a485ace [kernel] backport two changes from kernel.org: 
65e9b62d4503849b10bedfc29bff0473760cc597
ipv6: add special mode accept_ra=2 to accept RA while configured as router

c3bccac2fa76f1619dfe4fb7b9bee69de7f066d8
ipv6: add special mode forwarding=2 to send RS while configured as router


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24195 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-30 01:52:51 +00:00
cshore
191062a0ed [brcm63xx] image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24191 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:13:00 +00:00
cshore
f7a2edf410 bcm63xx: Add support for the T-Com Speedport W 500V. 
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:44 +00:00
cshore
9dd6c43103 bcm63xx: Add board id override fixup. 
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.

Also modify the image generation to generate apropriately tagged images.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:40 +00:00
cshore
d26482830e bcm63xx: Finalize support for DSL-274xB, rev C2. 
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:36 +00:00
cshore
36faccabad bcm63xx: Allow 'colored' power leds. 
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:30 +00:00
cshore
74fd46691e bcm63xx: Don't hardcode the switch ethernet interface in preinit. 
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:26 +00:00
cshore
2ce35911df bcm63xx: Add defconfigs. 
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:19 +00:00
florian
f0589f7290 [ar7] refresh patches and remove trailing whitespaces 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24181 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:14:34 +00:00
florian
90dd053819 [ar7] refresh and refine 972-cpmac_multi_probe.patch, patch from sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24180 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:56 +00:00
florian
45f1499380 [ar7] refresh 973-cpmac_handle_mvswitch.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24179 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:48 +00:00
florian
71bfc1ff04 [ar7] refresh and refine vlynq patch, patch from sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24178 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:42 +00:00
hauke
cae14a6a2e brcm47xx: remove support for old kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24168 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 14:08:04 +00:00
hauke
9d386c901e brcm47xx: use kernel 2.6.36.1 as new default kernel for this target. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24167 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 14:05:31 +00:00
hauke
cfe0566cfd kernel: add missing config symbols for 2.6.37-rc3 
Thank you maddes for reporting. (closes #8323)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 11:14:25 +00:00
hauke
eb0da340cb brcm47xx: reorder patches like they were commitet upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 22:47:11 +00:00
nbd
0726c0de70 remove CONFIG_ADM6996_PHY=y for ar7 and atheros - this driver is incomplete and should not be used yet 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24161 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 22:40:26 +00:00
hauke
53f5427aef kernel: add missing config option 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24157 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 16:08:41 +00:00
florian
ae6fa6a361 [ar7] patch 972-cpmac_multi_probe.patch correctly, thanks sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 12:18:41 +00:00
florian
2e825b7d5b [ar7] rename 973-cpmac_handle_mvswitch.c to 973-cpmac_handle_mvswitch.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24141 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 12:18:36 +00:00
florian
1a32a83a20 [ar7] handle mvswitch in cpmac, rework MII probing logic, patch from sn9 and Wipster 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24140 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 11:58:02 +00:00
florian
87ae2b3271 [ar7] handle new revisions of vlynq wrt reset sequence, patch from sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24139 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 11:57:57 +00:00
florian
61b72678e6 [ar7] increase flash window size to 32MiB, patch from sn9. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24138 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 11:57:52 +00:00
kaloz
d053fa7af0 update to the latest stable kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24136 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 18:50:11 +00:00
cshore
0760ba4d65 [brcm63xx] image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24127 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 11:06:13 +00:00
juhosg
ed0adccdff ramips: add support for Belkin F5D8235 v2 board 
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:23 +00:00
juhosg
dbdef16088 generic: add rtl8366rb switch vlan fid support 
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:21 +00:00
juhosg
d59a23df99 ramips: Use NET_IP_ALIGN instead of hardcoding 2 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24124 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:18 +00:00
juhosg
37b545f00f ramips: DMA map the correct RX skb size 
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24123 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:16 +00:00
juhosg
c523394925 ramips: Don't trigger BUG_ON due to skb allocation failure 
Instead just drop the rx'ed frame silently and reuse the already
available buffer.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24122 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:12 +00:00
juhosg
e0af17401f ramips: Remove unnecessary skb_put 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24121 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:08 +00:00
cshore
97de625a9b [brcm63xx] image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24118 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 20:17:08 +00:00
acoul
e79fbe8597 linux/brcm47xx: sync yhe BCM4710 fix with the upcoming upstream patch. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24116 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 16:41:34 +00:00
acoul
ed8ad021b1 linux/generic: add 2.6.37 support for the Cisco 7941/7945 IP phones: http://lkml.org/lkml/2010/11/21/219 (thank you Kevin Cernekee) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24114 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 14:36:15 +00:00
acoul
a7565ddade linux/brcm47xx: add missing patch on r24112 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24113 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 14:12:42 +00:00
acoul
723857f8a7 linux/brcm47xx: Broadcom BCM4710 does not belong in the BMIPS4KC family. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24112 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 14:08:41 +00:00
acoul
d92c081a67 linux/generic: refresh 2.6.37 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24111 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 14:04:42 +00:00
hcg
2f0ecbd629 [gumstix] Fix ext4 build 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 12:07:50 +00:00
hcg
517144faf6 [gumstix] Bump kernel version 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24109 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 11:59:03 +00:00
hcg
f6bd632bfc [gumstix] Remove NAND support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24108 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 10:16:37 +00:00
acoul
e521e0fb00 linux/brcm47xx: properly fix r24096 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 18:16:55 +00:00
acoul
19c4f2cb67 linux/brcm47xx: mainline 2.6.37 602977b0d672687909b0cb0542ede134ed6ef858 commit broke CPU revision: 00024000, MIPS (cc 0x805, rev 0x00, vendor 
0x4243) functionality. Revert that patch until we get a proper fix.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24096 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 17:17:15 +00:00
acoul
c2edd8cbfc target/linux: sync kernel patches to 2.6.37-rc3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24095 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 16:29:27 +00:00
kaloz
825f13453e remove 2.6.25 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24089 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 13:43:32 +00:00
kaloz
02028358c7 [coldfire]: remove 2.6.25 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24088 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 13:31:46 +00:00
kaloz
12a0868f92 [coldfire]: 2.6.31 support (WiP) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24087 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 13:29:58 +00:00
kaloz
d7833103e7 [target/x86]: move x86 back to .32 for now 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24085 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 12:58:31 +00:00
kaloz
0835d732ce switch from ext2 to ext4 (w/o) journaling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24084 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 12:12:39 +00:00
kaloz
1823498df7 use ext4 for ext2/3 on 2.6.32+ 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24083 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 12:11:50 +00:00
kaloz
d5e6bde258 add 2.6.32 patches to use ext4 for ext2/3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24082 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 12:03:23 +00:00
kaloz
e71ac4855b [target/x86]: additional Kconfig options for newer kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24081 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 11:34:45 +00:00
kaloz
e1fc4af8c6 [target/x86]: we don't need microcode updates 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24080 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 11:33:25 +00:00
kaloz
fa101fbdb6 add missing Kconfig symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24077 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 11:03:29 +00:00
nbd
fcdd5734fb x86: add missing l1 cache shift change 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24072 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-21 23:27:25 +00:00
nbd
7231ec09a2 x86: turn off CONFIG_X86_GENERIC for geos and net5501 
CONFIG_X86_GENERIC obscures CONFIG_MGEODE_LX, etc. and causes it to use wrong cache-line size.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24071 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-21 22:56:33 +00:00
cshore
01a2513287 [brcm63xx] Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known). 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24040 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-19 13:41:54 +00:00
kaloz
16d5b60d5f [avr32]: upgrade u-boot to v2010.12-rc1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24039 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-19 11:44:25 +00:00
juhosg
c80f4f97c6 ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbage 
r22700 contained a copy-and-paste error that set eth0's MAC address
twice and never set eth1's.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24036 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-19 07:24:00 +00:00
nbd
b6b0015701 x86: refresh config, enable pci express support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24026 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-17 22:41:17 +00:00
acoul
3fc5f9de73 target/linux: revert r24014 (further testing is needed) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24015 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-16 14:07:40 +00:00
acoul
1723896745 linux/generic: add kernel mppc/mppe for 2.6.37. http://yablochkin.net.ru/mppc/ (not enabled by default) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24014 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-16 13:42:21 +00:00
acoul
6dfcae994b linux/generic: fix a dynamic ingress_queue allocation on 2.6.37. http://patchwork.ozlabs.org/patch/71237/ (thank you KanjiMonster) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24013 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-16 13:28:24 +00:00
acoul
3537e1d856 linux/generic: switch to userspace __aligned_u64 calls. 
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=79b5dc0c64d88cda3da23b2e22a5cec0964372ac (thank you hauke)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24012 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-16 08:00:07 +00:00
cshore
33d20e9dce [tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. 
* Rewrote commandline parsing code using gengetopt
		- We now get long options
		- We have more options including use of the info section for 
			board information (e.g. to add the same boardid but
			different GPIOs on different routers)
	* Added back the ability to write stock images (this is useful, for example,
		when copying the firmware from the in-memory flash, and then being
		able to create an image that will let you revert to/test stock firmware
	* Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0)
	* Added ability to use all sections of the imagetag, including custom magic 
	 	signatures (e.g. for the Telsey router I'm adding soon), info sections,
		and reserved sections
	* Added putting the router type (as defined in the image generating Makefile)
		into the info1 section and the filesystem type in the info2 section.
		This will be used by mtd (when I add the code) to return the name of
		image used to flash this router.  (As requested by Jo, as well as being
		useful for same boardid different board scenario described above).



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-16 06:46:53 +00:00
florian
3c9084f873 [rdc] fix r6040 multicast operations (#7848) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24006 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-15 14:24:50 +00:00
florian
f516d1d9e7 [kernel] refresh 2.6.32 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24005 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-15 14:24:43 +00:00
acoul
d453069149 linux/generic: update to layer7-2.22 for kernels >=2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-15 12:24:48 +00:00
acoul
a70dfa8550 target/linux: add some 2.6.37 missing symbols. (thank you maddes) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24002 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-15 09:04:23 +00:00
acoul
9893933674 linux/generic: add a missing symbol. (thank you kaloz) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24001 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-15 08:57:26 +00:00
hauke
fe242ff768 kernel: fix l2tp kernel packages 
l2tp-ip and l2tp-eth should depend on l2tp_netlink
fix pppol2tp for kernel >= 2.6.35


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-14 20:51:30 +00:00
acoul
7f98aaaa7a linux/generic: backport device tree support to MIPS from 2.6.37 to 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23991 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-14 11:43:22 +00:00
juhosg
dc37a9bd6b generic: update gpio_buttons driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23984 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:53:01 +00:00
juhosg
4355718b98 ar71xx: drivers/ar71xx_wdt: fix size argument passed to copy_to_user() 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23983 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:52:45 +00:00
juhosg
cc04995115 ar71xx: drivers/ag71xx: remove deprecated usage of IRQF_SAMPLE_RANDOM 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23982 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:52:28 +00:00
juhosg
cbd9e227db ar71xx: use pr_* functions in drivers 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23981 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:52:12 +00:00
juhosg
b0acc8feff ar71xx: drivers/rb4xx_nand: remove C++ comment usage 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23980 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:51:55 +00:00
juhosg
c0734b8ffe ar71xx: return statements does not need parenthesis 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23979 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:51:38 +00:00
juhosg
74ed307c1e ar71xx: fix inline attribute location 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23978 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:51:21 +00:00
juhosg
2adda3cec6 ar71xx: wrap long lines 
(build errors has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23977 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:51:04 +00:00
juhosg
6be076283d ar71xx: fix trailing statements location 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23976 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:50:47 +00:00
juhosg
b6dbd83901 ar71xx: fix whitespaces nits 
(build error has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:50:29 +00:00
acoul
8db1ac1beb linux/adm5120: add preliminary 2.6.37 kernel support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23973 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 17:06:16 +00:00
acoul
28620683f1 linux/generic: add imq patches for linux kernels 2.6.35,36,37. (closes #8211) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23970 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 09:28:00 +00:00
acoul
ef689f44db linux/ixp4xx: remove some garbage from 601_arm_2.6.37_update.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23965 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-11 18:45:28 +00:00
acoul
bb1657ec55 linux/ixp4xx: add preliminary 2.6.37 kernel support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23964 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-11 18:42:38 +00:00
acoul
b5b2ead8eb linux/generic: add some missing 2.6.37 USB symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23963 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-11 16:36:05 +00:00
acoul
c5ec8ecc60 linux/generic: cosmetic 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23958 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-11 15:09:04 +00:00
acoul
f2e717e983 linux/generic: fix a mistake in 2.6.37/089-mtd-samsung-flash.patch. (thank you maddes) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23957 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-11 14:57:58 +00:00
acoul
30062312e2 linux/generic: update mini_fo for kernels >=2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-11 13:48:48 +00:00
acoul
24e0b7a944 linux/brcm47xx: include a missing 2.6.37 file (thank you hauke) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23955 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-11 08:49:52 +00:00
hauke
a4b7b26e4b kernel: disable some config symbols for kernel 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23951 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-10 20:42:46 +00:00
hauke
f66cc5090e brcm47xx: missing in r23949 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23950 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-10 19:12:49 +00:00
hauke
96e24ccdc5 brcm47xx: CONFIG_HAMRADIO=n makes no sense 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23949 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-10 19:11:24 +00:00
acoul
16afabf47d linux/brcm47xx: add preliminary 2.6.37 kernel support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23945 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-10 19:01:07 +00:00
acoul
f1df0b7ca4 linux/ar71xx: add preliminary 2.6.37 kernel support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23944 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-10 16:23:42 +00:00
kaloz
6d04b3f766 [orion]: use CMDLINE_FORCE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23942 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-10 13:13:03 +00:00
kaloz
01ec6e9b96 [orion]: upgrade to 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23941 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-10 13:12:25 +00:00
kaloz
8b22e86996 add a patch to fixup pcie reset on kirkwood - also fixes the boot issue on the wrt350n v2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23939 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-10 12:26:18 +00:00
florian
2c25f5f6a1 [malta] update to 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23935 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-09 08:42:28 +00:00
florian
f2f7a415fa [generic] add missing 2.6.36 symbol CONFIG_CHELSIO_T4VF 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-09 08:42:21 +00:00
acoul
929a8c4e3f linux/generic: add some missing patches, refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23931 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 18:28:07 +00:00
acoul
4985520c47 linux/generic: fix creation of rootfs_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23930 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 14:45:24 +00:00
kaloz
c425cd54e2 [avr32]: kernel targets uImage by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23929 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 11:57:56 +00:00
acoul
20ca544134 linux/atheros: add preliminary 2.6.37 kernel support (thank you nbd, florian) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23928 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 11:12:59 +00:00
acoul
0d9d3d7398 linux/generic: sync 2.6.37 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23927 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 11:08:08 +00:00
kaloz
d9c364a7c7 [x86:rdc]: x86 kernels target bzImage by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23926 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 09:44:33 +00:00
florian
b9f738b997 [realview] add README 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 09:41:32 +00:00
florian
24ee2d793b [versatile] remove to keep only one ARM qemu target 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 09:41:27 +00:00
florian
6a09710140 [realview] make description consistent 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23923 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 09:41:20 +00:00
florian
bc27206838 [x86 net5501: make kmod-leds-net5501 work 
Fixes dependencies, and properly labels the module as GPL (thanks, Felix!).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 07:31:40 +00:00
florian
80d29f765e [realview] add qemu target 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23921 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 07:31:36 +00:00
florian
71eb884cf8 [versatile] add target to be used with qemu 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23920 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 07:31:31 +00:00
florian
3ca8fd6798 [buildroot] make targets provide their KERNELNAME 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23919 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-08 07:31:25 +00:00
florian
f802d1905d [rdc] refresh patches, remove 015-r6040_fix_multicast.patch (upstreamed) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23918 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-07 22:41:28 +00:00
florian
16309e55e6 [ar7] avoid namespace clash on ar7_gpio_init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23917 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-07 22:25:25 +00:00
florian
33c8f09edf [x86] net5501: Add features to net5501 and remove HID support (unneeded) 
Since the net5501 doesn't have a VGA port, it doesn't need HID support either --
 all console access will be over a serial port.

Also add FEATURES to it as well.

Signed-of-by: Philip Prindeville <philip@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23916 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-07 20:37:40 +00:00
florian
91a35b1ce8 [uml] fix build failure when targetting ramdisk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23914 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-07 15:41:52 +00:00
hauke
112807de3f brcm47xx: Fix boot problem with wgt634u. 
Readd the workarround from the old version again which was removed in r22296 and refresh the patches.

This should close #7874

Thank you Russell Senior for testing.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23911 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-07 13:44:48 +00:00
claudio
b59add4dfd [ar71xx] Add support for Ubiquiti UniFi AP 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23904 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-06 21:08:48 +00:00
claudio
3b3e5ba8ae [brcm63xx] Add wps button on alice gate 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23903 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-06 21:08:44 +00:00
florian
d633f6be97 Merge branch 'adm8668' 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-06 18:54:20 +00:00
mb
e3cd71ceb2 n810: omapfb and keyboard fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23898 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-06 16:51:27 +00:00
florian
c9a09f8171 [ep93xx] fix touchscreen driver build failure 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-06 14:56:58 +00:00
florian
fd7f4dc5bf [ep93xx] add missing symbol spotted by buildbot. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23891 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-05 18:46:43 +00:00
acoul
51f10e98b1 target/linux: fix a wrong 2.6.37 patch (thank you acinonyx) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23889 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-05 17:41:13 +00:00
mb
101bcffa4f omap24xx: Add linux 2.6.37 config/patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23888 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-05 16:59:39 +00:00
mb
2c7af0d7c7 linux 2.6.37: Disable DEBUG_ICEDCC 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23887 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-05 16:57:51 +00:00
mb
a4bbadc18a n810 profile: add maemo-kexec 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23886 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-05 14:35:33 +00:00
kaloz
7a19d5a01b [orion]: the same DEFAULT_PACKAGES should be selected in the generic Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23885 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-05 07:33:43 +00:00
kaloz
11b8ca88ab [orion]: only build squashfs images by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23884 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-05 07:30:55 +00:00
acoul
2923cd71cd target/linux/orion: create subtargets (closes #8154) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23883 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 22:10:11 +00:00
acoul
21acc97c7e target/linux: extend r23881 for 2.6.37 too. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23882 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 21:47:29 +00:00
acoul
c24e6544fc target/linux: add missing symbols (closes #8147) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23881 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 21:42:07 +00:00
nbd
f02be8f01c ar71xx: Configure WNDR3700 switch LED colors properly (#8103) 
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23879 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 18:55:16 +00:00
nbd
1a9465cf71 Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on submitter's request 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23878 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 18:53:18 +00:00
nbd
de74662151 ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984) 
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23877 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 18:48:22 +00:00
nbd
11c1641bac ar71xx: Set eth1 MAC address from EEPROM for WNDR3700 
The WNDR3700's art/caldata partition contains three MAC addresses at
offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1,
respectively. The existing code configures eth1's MAC address by adding
1 to eth0's instead of using the value stored in the EEPROM. This patch
causes the stored value to be used directly. (On my WNDR3700s, the three
stored addresses are all sequential anyway.)

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23876 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 18:46:07 +00:00
nbd
6f13c00b0a ar71xx: fix the wndr3700 antenna group setting for the first wireless chip (thx, Mark Mentovai) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23875 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 18:39:49 +00:00
kaloz
9445a63a46 [avr32]: upgrade to 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23867 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 14:18:45 +00:00
florian
61c948163d [kernel] fix mvswitch PHY polling setting (#8133) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23862 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 14:09:20 +00:00
kaloz
9edb0fd46f these belong to the generic config.. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23853 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 11:09:08 +00:00
kaloz
0c95905c4f update kernels to 2.6.32.25 and 2.6.35.8 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 09:01:08 +00:00
kaloz
f184e48df9 add missing 2.6.36 symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 08:49:11 +00:00
lars
775fb24fbf [kernel] Add even more missing symbols to the 2.6.36 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23842 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-03 21:01:01 +00:00
blogic
74f6f2f5a2 [ifxmips] 
* adds patch to 2.6.35 series to make dsl work


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23839 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-03 19:10:56 +00:00
blogic
0a2b2965cd [ifxmips]: 
* bump kernel to 2.6.35.8
* merge arcadyn mach files
* fixes ar9
* adds hack for tapi drivers



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23836 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-03 19:02:27 +00:00
acoul
8be1093039 target/linux: add preliminary 2.6.37 kernel support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23828 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-03 16:13:33 +00:00
nbd
4f69a1b329 ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23822 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-03 14:55:53 +00:00
kaloz
c73605b3b6 more 2.6.36 config symbols.. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23778 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-02 12:28:34 +00:00
kaloz
a91ebc87ec [ppc4xx]: add additional config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23777 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-02 12:22:45 +00:00
kaloz
7724f3fbc3 [ixp4xx]: refresh 2.6.36 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23776 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-02 12:21:31 +00:00
kaloz
441f899569 [ixp4xx]: update the gpiolib patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23775 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-02 12:20:58 +00:00
kaloz
4e228a9f1f [ixp4xx]: remove unneeded patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23774 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-02 12:17:05 +00:00
kaloz
9875342576 [ixp4xx]: support only 2.6.32 and 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23773 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-02 12:01:56 +00:00
kaloz
0bf050bb75 [generic/arm]: add a patch to export dma_set_coherent_mask 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23772 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-02 11:52:22 +00:00
kaloz
c12bbbdf82 this is not a platform specific patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23771 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-02 11:50:56 +00:00
kaloz
1fbd148c68 add some additional 2.6.36 symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23770 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-02 11:49:32 +00:00
mb
adfbdd63b8 n810-gui profile: Add xkeyboard-config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23767 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-01 21:46:28 +00:00
florian
3e16402668 [ep93xx] switch to 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23762 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-01 13:09:47 +00:00
florian
dc28f56d3f [ep93xx] set the mac address using the chip-unique serial number 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23761 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-01 13:09:41 +00:00
florian
bb306432fe [ep93xx] add support for 2.6.36 kernel 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23760 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-01 13:09:34 +00:00
florian
e41a04d067 [ep93xx] resync kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23759 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-01 13:09:26 +00:00
florian
fba7a3f47e [ar7] initialize clocks earlier for lpj to be correct (#7548) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23746 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-31 21:45:49 +00:00
florian
94ffdca114 [ar7] refresh 2.6.32 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23745 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-31 21:45:30 +00:00
florian
87baa2e83c [ar7] vlynq: try remote clock first, then external (#7324) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23737 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-31 13:10:55 +00:00
florian
a81752b112 [ar7] refresh 2.6.32 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23736 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-31 13:10:49 +00:00
florian
53da46dce6 [kernel] refresh 2.6.32 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23735 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-31 13:10:35 +00:00
florian
cf5ff97899 [package] add kmod-leds-net5501 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23729 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-30 22:35:59 +00:00
florian
a11e799408 [x86] resync config-default, enable gpio support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23727 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-30 22:35:50 +00:00
acoul
af7408674b linux/generic: fix "rm: can't remove 'xyz': Directory not empty" symbolic link and directory issues on RouterBoard family devices. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23718 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-30 10:00:34 +00:00
lars
0b09e23cfc [kirkwood] Fix patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23702 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-29 06:59:46 +00:00
hcg
9ba07fe6a3 [omap35xx] Update u-boot command-line parameters 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23691 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-28 08:54:52 +00:00
hcg
9c98d45868 [omap35xx] Bumper gumstix kernel version to 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23690 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-28 08:53:14 +00:00
hcg
31798be449 [kernel] Add 2.6.36 config for gumstix board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23688 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-28 08:47:48 +00:00
hcg
c55457c6c3 [kernel] Add missing symbols to 2.6.36 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23687 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-28 08:37:00 +00:00
lars
240961d891 [kirkwood] Adds leds and gpio keys support for Iomega iConnect. 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23682 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-27 21:22:07 +00:00