qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-23 22:59:40 +02:00
Code
25,432 Commits 13 Branches 0 Tags 117 MiB
6c2c55144e
Commit Graph

25432 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
juhosg
6c2c55144e ar71xx: rename QCA9558 ETH_CFG bit defines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34852 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:46 +00:00
juhosg
0da7fc3cdc ar71xx: fixup allowed PHY interface types for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:44 +00:00
juhosg
e52fbd2289 ar71xx: don't assign any MII bus device on QCA9558 by default 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:43 +00:00
juhosg
661316a678 ar71xx: ag71xx: fix mii_bus_dev sanity check 
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:41 +00:00
juhosg
5e4cac78d5 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev 
Trying to do that causes a NULL pointer dereference:

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 00000001
$ 4   : 00000000 802e6390 ffff8f45 00000001
$ 8   : 804b5360 ffffff80 802f93bc 00000000
$12   : 802f93e8 00000000 00000000 00000000
$16   : 8381aba0 8381aba0 00000000 00000000
$20   : 8295eff0 00000032 80000000 004101b8
$24   : 00000000 777265b0
$28   : 82936000 82937cf0 00420000 801d18d4
Hi    : 00000000
Lo    : 00000001
epc   : 801d170c ar7240sw_reset+0x1c/0x19c
    Tainted: G           O
ra    : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
 ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
        8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
        8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
        8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
        8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
        ...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024  afb40020  afb10014 <8c910000> 00809021  24100104 24130704  8e440000  02002821

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:40 +00:00
juhosg
565673cb04 generic: ar8316: allow to configure port 6 via platform data on AR8327 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34847 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:37 +00:00
juhosg
e1ab1fcace generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34846 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:35 +00:00
juhosg
e39812dd92 ramips: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34845 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:11:13 +00:00
juhosg
aaf21b9d13 package/kernel: remove obsolete CONFIG_USB_[EO]HCI_RT3883=y symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:11:09 +00:00
juhosg
e8e5a1eaf8 ramips: convert to use {e,o}hci-platform driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:11:08 +00:00
juhosg
c4dd6997f2 generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers 
Backport of upstream commits:

86e4cb35f2260374df4139c2352afe7fe247cb60 usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
b6dd245c4594482d46507a0bfd100439be367952 usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe
04216bedafb1b3992a6c2b7f1518281d2ba5fc7b usb: host: ehci-platform: add platform specific power callback
e4d37aeb373a5edceecc1dadc76fabbe8bc18e44 usb: host: ohci-platform: addplatform specific power callback

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34842 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:11:06 +00:00
blogic
26bf467fae [netfilter] fix ipv4 nat on 3.7 by adding missing iptables modules 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34841 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 10:17:29 +00:00
blogic
08cce55d9c [lantiq] ar9 did not load atm driver properly 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 10:16:52 +00:00
blogic
881b3504ae [lantiq] dont use input layer for gpio buttons 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34839 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 20:04:20 +00:00
blogic
cef3fba37d [lantiq] default switch setup for WBMR 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34838 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 20:04:12 +00:00
blogic
d8df31cd7d [lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) 
Tested only on the wbmr-hp-g300h, could affect/break other devices.

Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34837 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 20:04:04 +00:00
blogic
41d3a10f48 [lantiq] adds script to set wps info on boards with a wps button 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34836 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 20:03:59 +00:00
blogic
41afc96ae1 [lantiq] minor tweaks to WBMR image 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34835 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 20:03:54 +00:00
blogic
75a9d0e41b [gpio-button-hotplug] add OF binding 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34834 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 20:03:49 +00:00
blogic
b05c7e7166 [lantiq] add missing PHY_BASIC_FEATURES to 100mbit phys 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34826 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 14:41:35 +00:00
blogic
0ca5ac81bb [lantiq] fix typo inside fritz3370 devicetree file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34825 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 14:41:30 +00:00
blogic
29c2480435 [lantiq] more devicetree fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34824 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:55 +00:00
blogic
1b259a2387 [lantiq] improve button handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34823 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:50 +00:00
blogic
5fb086db47 [lantiq] add phy-reset gpio handling to xrx200-net 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34822 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:44 +00:00
blogic
e8f1a67a24 [lantiq] add more lantiq phy ids based on daniels uboot code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34821 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:40 +00:00
blogic
ca7d6f9a2c [lantiq] refresh patch and install v1.1 gphy blobs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34820 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:35 +00:00
blogic
5c4b06243a [lantiq] adsl firmware in wrong submenu 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34819 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:30 +00:00
blogic
4a57a236cb [lantiq] minor cleanup for adsl firmware handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:25 +00:00
blogic
ea855caed8 [lantiq] properly symlink the adsl firmware 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34817 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:20 +00:00
blogic
33374b75cc [kernel] make to rtl8366_smi of binding use gpio_is_valid 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34816 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:14 +00:00
mirko
5ca25ac981 [package/base-files] hot-fix nameclash in sysupgrade: rename pivot() to supivot() in sysupgrade 
Sysupgrade defines its very own pivot() function.
Prior merging boot.sh and functions.sh sysupgrade just included boot.sh,
now it includes functions.sh which defines pivot() as well, however
slightly different which causes sysupgrade to fail.

This is a hot-fix to unbreak sysupgrade, however those two pivot()
functions should actually get merged.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34815 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 12:10:21 +00:00
juhosg
170303015d kernel: add solos-pci update for 3.3 
Same patches that I just merged for 3.6 and 3.7, except with one
additional fix that went into v3.4 that needed to be included.

Submitted more for the benefit of the AA branch than for trunk.

[juhosg: refresh the patch with quilt]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34813 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 10:38:33 +00:00
juhosg
2a91547adb rb532: add support for 3.7 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34812 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 19:25:43 +00:00
juhosg
fd516a9a99 ramips: Add USB support for DAP-1350 platform. 
It seems to work as intended, but only lightly tested.

Patch-by: Bryan Steele <brynet@gmail.com>
SIgned-off-by: Gabor Juhos <juhsog@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34811 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 19:17:17 +00:00
juhosg
bcc5b96ea2 rb532: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34810 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 19:09:03 +00:00
juhosg
95e6918aa1 rb532: switch to 3.6.11 
Compile tested only. The target is broken anyway,
so the kernel version does not matter too much.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34809 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 19:09:01 +00:00
juhosg
bf633a72dc rb532: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34808 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 19:09:00 +00:00
juhosg
76b8515e4d ppc44x: add support for 3.7 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34807 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 18:11:22 +00:00
juhosg
92520e6010 kernel: add solos-pci patches from 3.8 for new hardware 
[juhosg: refresh patches with quilt, skip the patch for 3.3]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34806 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 17:14:57 +00:00
juhosg
2537e8db61 linux: add missing symbols for 3.{6,7} 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34805 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 17:14:56 +00:00
nbd
976f30f6bf kernel: fix module packages postinst by pointing to the new functions.sh location 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 15:29:37 +00:00
nbd
51e194d660 docs: update remaining references to functions.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 15:29:33 +00:00
luka
f1b689a9f4 [package] base-files: we don't need /etc/functions.sh symlink anymore 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34802 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 15:15:30 +00:00
juhosg
02ad6192c2 cns21xx: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34801 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 14:51:17 +00:00
juhosg
8f9f1344e6 ppc40x: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34800 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 14:51:16 +00:00
juhosg
99a2ffcf90 ppc40x: add missing NULL terminator to avoid boot panic on PPC40x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34799 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 14:37:39 +00:00
juhosg
d6f19be873 ar71xx: rename fix-ar933x-reset patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34798 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 14:13:16 +00:00
juhosg
603b13e21e ppc40x/44x: disable SWIOTLB 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34797 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-20 14:09:39 +00:00
blogic
3d8c2250dc [lantiq] adds a fix for ar8216 mii detection on etop driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34795 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-19 16:20:24 +00:00
mirko
c8e772f18f merge /lib/functions/boot.sh and /lib/functions.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34794 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-19 16:07:53 +00:00