Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27800 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds 802.1Q VLAN support for the ADM6996M chip.
The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.
The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].
Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt
Signed-of-By: Peter Lebbing <peter@digitalbrains.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed
in 2.6.39, so replace it with DEFINE_SPINLOCK().
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26770 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since the PHY driver is only used for the WAN port and there is virtually
no difference between it and the generic PHY driver, we can sefely remove
it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26600 3c298f89-4303-0410-b956-a3cf2f4a3e73
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24125 3c298f89-4303-0410-b956-a3cf2f4a3e73
AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid".
Change all to "vid" and annotate the description with the valid ID range.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23419 3c298f89-4303-0410-b956-a3cf2f4a3e73
The RTL8366S/RB support connecting a second mac to it and using the 5th
port as an independent phy. Therefore we need to handle autonegotiation
changes for phy 4 like on a single phy device.
This fixes#7980, verified on a WNDR3700.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23127 3c298f89-4303-0410-b956-a3cf2f4a3e73
Tested on ifxmips based board. The PSB6970 is also known as the Infineon Tantos switch.
Signed-off-by: Ithamar R. Adema <ithamar.adema@team-embedded.nl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22914 3c298f89-4303-0410-b956-a3cf2f4a3e73
add a configuration option for dynamically enabling/disabling this feature.
based on patch from #7637
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22545 3c298f89-4303-0410-b956-a3cf2f4a3e73
- add some comments to a few data structures
- add a switch_dev_ops data structure for attributes and callback to replace the stupid template memcpy
- get rid of the switch_dev.priv pointer - using container_of() is better
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22476 3c298f89-4303-0410-b956-a3cf2f4a3e73
The usage of bitfields causes problems in Little-Endian mode. Remove
them and manipulate the bits directly in the appropriate functions. This
change also reduces the size of the binary a bit.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22192 3c298f89-4303-0410-b956-a3cf2f4a3e73
