I looked into buildbot snapshots and noticed that some platforms have
not successfully compiled for a long time. One example is at91, which
seems to be missing device-related kernel config symbols and the
snapshot build crashes already there.
Please find attached a patch that makes the at91 kernel config and
build to succeed again.
Signed off by: hannu.nyman@iki.fi
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31288 3c298f89-4303-0410-b956-a3cf2f4a3e73
The alix2 target has the VGA console for grub enabled by default. This
prevents the grub menu from appearing on bootup. It is disabled by
default for the other embedded x86 platforms. This patch corrects that
behavior for the alix2 target.
Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31270 3c298f89-4303-0410-b956-a3cf2f4a3e73
Thanks to the qi-hardware project - especially to Lars, Maarten and Xiangfu
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31218 3c298f89-4303-0410-b956-a3cf2f4a3e73
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.
To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router
Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31208 3c298f89-4303-0410-b956-a3cf2f4a3e73
Support status led in diag.sh for RB750
Patch from: Evangelos Arkalis <arkalis.e@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31207 3c298f89-4303-0410-b956-a3cf2f4a3e73
Implements the ARV752DPW architecture in mach-arv.c
Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31206 3c298f89-4303-0410-b956-a3cf2f4a3e73
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.
Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31205 3c298f89-4303-0410-b956-a3cf2f4a3e73
this patch adds support for D-Link DNS323 storage device.
You can find more info here:
http://dns323.lukaperkov.net/
Currently you need serial cable to flash OpenWrt on DNS-323.
Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31198 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch fixes the following issues I encountered while compiling kernel 2.6.38.8 for my Omnima Embedded Controller/Edimax BR6104KP:
- kernel comes up with machine selection during build, even though everything was properly set in menuconfig
- USB api changes
Successfully built and tested with r29755.
Signed-off-by: Hartmut Knaack <knaack.h [at] gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31194 3c298f89-4303-0410-b956-a3cf2f4a3e73
Also remove a duplicate patch from lantiq (already in generic).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31158 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add basic support for the internal ethernet switch on bcm6368. It behaves
as a dumb switch for now, but allows basic connectivity.
Also drop the ethernet patch for bcm6345 for now, it needs rework.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31129 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add missing external IRQ code parts for older chips in the new code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31128 3c298f89-4303-0410-b956-a3cf2f4a3e73
Reorder patches for a clearer distinction between the purposes of
the different patches.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31127 3c298f89-4303-0410-b956-a3cf2f4a3e73
'set-but-unused-variable'-issues are dealt with in a generic way now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31124 3c298f89-4303-0410-b956-a3cf2f4a3e73
