qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-31 00:41:45 +02:00
Code
20,084 Commits 13 Branches 0 Tags 117 MiB
70a23a1138
Commit Graph

7332 Commits

Author SHA1 Message Date
kaloz
537e1055b8 config symbol cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25272 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-02-01 13:18:26 +00:00
kaloz
6f36e43344 add missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25271 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-02-01 12:44:16 +00:00
jow
317b9407e3 [x86] geos: preconfig fix 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25255 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-30 21:07:39 +00:00
mb
d23048de6c omap24xx: Move p54 eeprom init to preinit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25242 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-29 18:45:28 +00:00
mb
bf507d0439 Add p54spi EEPROM initscript 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25241 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-29 18:15:19 +00:00
mb
45b3146291 n810 profile: Add calvaria 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25236 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-29 12:39:14 +00:00
mb
6570a252af n810bm: Implement more ADC basics 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25222 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-28 22:45:37 +00:00
mb
762f2b46b9 n810: Install matchbox-keyboard 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25218 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-28 19:38:20 +00:00
mb
8f22574346 n810: Use tint2 by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25214 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-28 17:36:45 +00:00
mb
c324167a57 omap24xx: Workaround n810 FN key issue 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25212 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-28 17:31:34 +00:00
mb
e88b36dfbb omap24xx: Don't automatically mount maemo fs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25178 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 22:15:43 +00:00
florian
9406119753 [adm8668] fix firstboot with new MTD map driver 
my-mkimage previously did not include the fs_mark of deadc0de because
upon formatting of jffs2 partition, U-Boot's CRC validation would not
allow the image to boot. This new MTD map will shrink the
kernel+rootfs+fs_mark image and recalculate the CRC, so that only the
kernel is part of the image validation. This also improves boot time,
since less is copied from FLASH->RAM. This is mostly from brcm47xx,
just with u-boot image vs TRX partitions.

Signed-off-by: Scott Nicholas <scott.nicholas@scottn.us>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25176 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 21:50:00 +00:00
florian
c2ffdb04c4 [adm8668] clean up mach-adm8668 includes 
This patch cleans up the include directory, as they were from vendors
2.4 GPL source. Now only what's used is there.

Signed-off-by: Scott Nicholas <scott.nicholas@scottn.us>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25175 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 21:49:56 +00:00
florian
d1c886b4e6 [adm5120] add default network/leds config (#6759) 
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25171 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 21:49:42 +00:00
florian
166503f1c5 [adm5120] zyxel: use acx-mac80211 driver by default 
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25170 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 21:49:39 +00:00
florian
83838ea610 [adm5120] fix p-334wt build 
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25169 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 21:49:31 +00:00
mb
40c7094d5b omap24xx: Support ext4 as rootfs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25166 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 21:00:07 +00:00
jow
60b7742979 [at91] move Netus G20 into a subtarget and rework toplevel config and makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 20:57:01 +00:00
jow
a5a124264d [at91] prepare TQMa9263 subtarget 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25164 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 20:55:53 +00:00
jow
a40f1cc3aa [at91] add TQMa9263 board setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25163 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 20:55:26 +00:00
jow
65a3ed3da3 [at91] prepare TQ-Components TQMa9263 kernel support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 20:54:54 +00:00
mb
671ffe62b9 omap24xx: Fix serial console for .37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25161 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 20:30:28 +00:00
mb
4b892070c9 omap24xx: Update to .37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25160 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 20:20:27 +00:00
kaloz
83a46ae9f3 [target/generic/mips]: we don't support gcc 4.1.x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25147 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 13:33:53 +00:00
mb
30d1a74252 omap24xx: Refresh 2.6.37 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25143 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 13:19:03 +00:00
kaloz
6042607907 [target/leon]: fix LD name 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25140 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 12:52:33 +00:00
kaloz
05448b64c0 [target/leon]: add preliminary LEON support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25139 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 12:51:25 +00:00
florian
8b733f9f79 [brcm63xx] give some credits to Tanguy Bouzeloc in the spi driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25133 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-27 02:11:08 +00:00
juhosg
68f33c556b ramips: register watchdog device on the rt288x boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25130 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:48:52 +00:00
juhosg
78f0155856 ramips: add watchdog device for RT288x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25129 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:48:50 +00:00
juhosg
f019ef96de ramips: register watchdog device on the rt305x boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25128 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:48:47 +00:00
juhosg
a86c456862 ramips: add watchdog device for RT305x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25127 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:48:46 +00:00
juhosg
8e047f5e1f ramips: add watchdog driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:48:41 +00:00
juhosg
e388e46ebb ramips: implement clock API for RT288x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:48:39 +00:00
juhosg
86f7e2834f ramips: implement clock API for RT305X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25124 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:48:35 +00:00
juhosg
b2dc6c86ee ramips: remove extern and __init from function prototypes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25123 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:48:33 +00:00
juhosg
8ac5cf45e8 ar71xx: add rtl8366s initvals for the DIR-825 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25121 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:35:47 +00:00
juhosg
f1f92beb2e generic: rtl8366s: allow initial register values to be passed via platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25120 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:35:46 +00:00
juhosg
2f9a16818c ar71xx: create firmware image for the WNDR3700v2 board 
Patch-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25119 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:35:44 +00:00
juhosg
9e07cb05fa ar71xx: add support for the WNDR3700v2 board 
Based on a patch by Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25118 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:35:42 +00:00
hcg
179c8929e7 [omap35xx] Add kernel patch to expose omap3 die id via sysfs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25112 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 13:33:07 +00:00
nbd
a6c855e6e5 x86/soekris: Add defconfig for soekris net4801 and net4826 
Add default config file for net4801 and 4826 and initial script
to copy config file like it is done for other platforms.

Patch from: kentarou matsuyama <matsuyama@thinktube.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25103 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 11:33:46 +00:00
nbd
b85cea3219 x86/soekris: Add script to detect soekris model 
Add script to detect soekris board of net4801 and net4826.

Patch from: kentarou matsuyama <matsuyama@thinktube.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 11:33:42 +00:00
juhosg
fc69050270 generic: remove en25pxx support patch, it is in mainline since 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25097 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-25 10:24:27 +00:00
kaloz
cf57ed1e80 [target/orion]: drop 2.6.32 support (next target is 2.6.38) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25096 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-25 08:57:37 +00:00
nbd
b50e3f0e07 kernel: when bridging, do not forward EAP frames to other ports, only deliver them locally 
fixes WPA authentication issues with multiples APs that are connected to each other via bridges

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25095 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-25 00:25:49 +00:00
kaloz
9858f02efc [target/orion]: add missing symbol for 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25091 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-24 12:52:44 +00:00
kaloz
326e76cb41 [target/orion]: upgrade to 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25090 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-24 12:51:48 +00:00
kaloz
05f753b7a6 [target/generic/2.6.38]: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25089 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-24 12:36:18 +00:00
kaloz
aca0f4cdf8 [target/generic/2.6.38]: replace the mips_boot patch with one that makes BOOT_RAW selectable, and enable it in the generic config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25088 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-24 12:33:25 +00:00
kaloz
0d918453ce this missing header patch is way too old for any sane software to depend on it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25087 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-24 12:18:02 +00:00
kaloz
6b05d087f5 remove mips gcc4 inline patch - fixed upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25086 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-24 12:16:57 +00:00
kaloz
e30aa8bf8d platform specific patches don't belong here - take #2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25085 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-24 12:11:25 +00:00
kaloz
a58c9ec9a3 platform specific patches don't belong here 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25083 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-24 11:01:38 +00:00
kaloz
dab65574c2 [target/generic]: refresh 2.6.38 patches with -rc2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25081 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-24 09:39:17 +00:00
blogic
4741579f80 [lantiq] 
* adds arv4518pw mach support
* fixes arv4525pw
* make sure all mach names have the same style
* move code around


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25075 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-23 19:16:33 +00:00
blogic
20f9bc31d4 [lantiq] adds machtype for ARV7518PW 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25074 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-23 12:51:15 +00:00
blogic
b990408d19 [lantiq] remove deadcode from [25072] 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25073 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-23 12:12:23 +00:00
blogic
67251bb1a5 [lantiq] 
* fix pci support for more than 1 device
* fixes ioport mappings
* adds support for arcor easybox 803/arv752DWP22
* gpio direction was not set properly during a gpio_request()
* usb compile warning

bugfix, cleanup,


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25072 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-23 12:08:44 +00:00
blogic
f3cd157b43 [geos] 
* Make sure that Geos baud-rate defaults	correctly
  Changeset 23414 somehow got reordered.  The unconditional default trumps later settings.

contributed by Philip Prindeville


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25068 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-22 23:10:51 +00:00
blogic
a59a56e424 [geos] 
* adds sane default uci environment
* adds sane default package selection

contributed by Philip Prindeville



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25065 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-22 22:43:51 +00:00
kaloz
f6ceb966a6 [target/generic]: preliminary 2.6.38 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25057 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-21 17:52:22 +00:00
hcg
4edf2f65af [gumstix] update package dependencies 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25050 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-20 11:26:47 +00:00
blogic
8e454c7abc [lantiq] 
* revert [25002]
* fixes EBU ack when EBU causes an irq



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25047 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-19 15:56:27 +00:00
jow
7141d869e6 [ar71xx] fix null pointer access in mach-dir-600-a1.c machine setup (#8671) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25043 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-18 18:04:50 +00:00
florian
80098867e8 [realview] disable built-in MMC support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25042 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-18 14:53:21 +00:00
florian
3bf3252489 [realview] add missing config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25041 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-18 14:53:15 +00:00
nbd
561ec2935a mpc85xx: disable the i8259 irq on mpc8548cds (but leave the controller initialized) - it shares an irq with the pcie device which causes irq storms 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25037 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-18 14:43:44 +00:00
florian
f9887a55d2 [ep93xx] add missing keyboard symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25036 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-18 12:10:26 +00:00
cshore
4a289f7420 [x86]: Missing symbols for CONFIG_xxx .. 
Thanks Philip Prindeville

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25031 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-17 05:49:02 +00:00
nbd
89a10d913b mpc85xx: add a new 'spe_fpu' feature flag for the FPU used on freescale powerpc cpus 
The SPE FPU is ABI-incompatible with the regular powerpc FPU,
this needs to be reflected in the toolchain target name.
Fixes floating point crashes in user space

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25018 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-16 01:25:06 +00:00
nbd
3f3e027d9c add missing kernel kernel config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25017 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-16 01:25:02 +00:00
nbd
fdd370be7e mpc85xx: clean up bogus kernel config overrides 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25016 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-16 01:24:57 +00:00
nbd
abe893ed14 mpc85xx: fix mpc8548 support (reorder serial ports, add default stdout path to device tree), enable pcie 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25015 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-16 01:24:53 +00:00
mirko
2bd50b66f3 [lantiq] move irq.c from patch into own file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25002 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-15 03:32:16 +00:00
juhosg
f742b2d746 ar71xx: rework WNDR3700 image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24983 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 10:37:14 +00:00
juhosg
6e0592661e ar71xx: build separate image for the WNDR3700 with NA region 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24982 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 10:37:11 +00:00
hcg
c824ab3e04 [omap35xx] Update gumstix profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24979 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 09:38:20 +00:00
claudio
5dceefad48 [at91] Fix i2c driver and package it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-13 12:01:07 +00:00
claudio
d519a69949 [at91] Allow module compilation for adc driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24974 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-13 11:00:47 +00:00
juhosg
56457aa92f brcm47xx: add gpio_set_debounce function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24968 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-11 20:05:01 +00:00
juhosg
77e1ad2c5f ar71xx: fix wlan LED on the TL-WR741 board 
* Patch from #8630

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24963 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-11 08:20:47 +00:00
juhosg
0ecedcb900 ar71xx: fix wrong names of the WPS LED/button 
Reported-by: Nuno Gonçalves

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24961 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-10 18:15:47 +00:00
hauke
13ec8222a8 kernel: deactivate ext4 SElinux support and extended attributes support 
in general config. This effects the build in kmod-fs-ext4 and when it 
is build into the kernel in the x86 target.

Thank you Philip Prindeville


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24951 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-09 22:43:06 +00:00
juhosg
e973943aa3 generic: generic: remove MIPS device tree backport patch from 2.6.36 
It makes no sense without a platform which uses that.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24946 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-09 09:52:12 +00:00
juhosg
80d537874f ar71xx: remove the gpio_wr_fix patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24945 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-09 09:29:51 +00:00
juhosg
017387d91d ar71xx: use gpio_*_cansleep calls in the rb4xx NAND driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24944 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-09 09:29:45 +00:00
juhosg
cac44c3002 generic: rtl8366: fix build error 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24943 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-09 05:36:44 +00:00
juhosg
9de5c06f89 ar71xx: add kmod-ledtrig-usbdev for the MZK-W04NU profile as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24941 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 21:04:57 +00:00
juhosg
6a3595f161 ar71xx: add kmod-ledtrig-usbdev to the relevant profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24940 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 21:02:25 +00:00
juhosg
784b0f3ae6 generic: rtl8366: enable vlans before enabling the ports 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24939 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 20:24:29 +00:00
juhosg
5082ee8d98 generic: rtl8366: enable ports only after VLAN configuration is done 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24938 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 20:24:26 +00:00
juhosg
14f9ab7993 generic: rtl8366: add enable_port helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24937 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 20:24:22 +00:00
juhosg
7a158c5f40 generic: rtl8366_smi: init VLANs only in first switch initialization 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24936 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 20:24:18 +00:00
juhosg
cf57ba0b68 generic: rtl8366s: use correct bitmasks in sanity checks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24935 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 18:04:04 +00:00
juhosg
891f8034ba generic: rtl8366s: add vlan fid support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 18:04:00 +00:00
juhosg
2743857121 generic: rtl8366: add debugfs file for VLAN4K table 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24933 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 18:03:57 +00:00
juhosg
9ee3790b2a generic: rtl8366rb: use correct bitmasks in sanity checks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24930 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 11:28:35 +00:00
juhosg
a241f3c34a ar71xx: use spinlock in ar71xx_device_{start,stop} 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24929 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 11:28:32 +00:00
juhosg
ab75a04099 ar71xx: add kmod-usb-ohci module for the WNDR3700 profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24927 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 10:51:20 +00:00
lars
6ea4c6c0f2 [xburst] Drop support for older kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24915 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-06 01:33:19 +00:00
lars
12cb8e47f8 [xburst] Add 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24914 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-06 01:32:17 +00:00
jow
5ceda5f233 [generic] fix unbalanced mutex_lock/mutex_unlock in mini_fo getxattr op. Thanks Daniel Dickinson for tracking this down 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24906 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-05 03:07:56 +00:00
jow
5526bb9258 [generic] disable CONFIG_EXT4_FS_XATTR on kernel 2.6.35 and 2.6.37, this exposes a mutex bug in mini_fo leading to hard lockups with various filesystem operations 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24905 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-05 02:48:19 +00:00
juhosg
f370a85b20 ramips: ramips_esw: fix typos 
Patch from #8577.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24898 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-04 13:44:05 +00:00
juhosg
2e7490c8ca ar71xx: make uci-default scripts executable 
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24897 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-04 13:44:01 +00:00
hauke
032ac3c4cc brcm47xx: fix compile problem when serial is deactivated. 
Thank you Andrey


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24885 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-02 20:53:09 +00:00
juhosg
0f3ae34a86 generic: more CONFIG_KEYBOARD_* symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24860 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-30 20:10:18 +00:00
juhosg
0ddbef1f62 cns21xx: add initial support for the Cavium CNS21xx SoC 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24859 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-30 17:19:16 +00:00
juhosg
fef64804dd generic: update ARM mach-types 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24854 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-29 20:01:35 +00:00
juhosg
b1015fa99a generic: add missing CONFIG_KEYBOARD_* symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24852 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-29 18:08:06 +00:00
juhosg
c872aa049d generic: add CONFIG_DEBUG_ICEDCC symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-29 17:29:01 +00:00
florian
7ce92bc6e8 [brcm63xx] multiple SPI driver fixes 
- fix platform device registration
- fix chipselect, command register defines, add missing clock
- make slave select proper
- fix multibytes transferts

Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-29 16:19:59 +00:00
acoul
b8223ca287 target/linux: sync to kernel 2.6.37-rc8, refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24847 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-29 13:24:17 +00:00
cshore
64e304feb6 [brcm63xx] patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen). 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-28 08:10:32 +00:00
cshore
8688d050d6 [brcm63xx] patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24842 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-28 04:05:04 +00:00
florian
ac2bc89bb8 [brcm63xx] spi driver: remove bcm_rset usage 
Since bcm636x platform embeds two spi master device,
the attached patch removes static bcm_rset usage, replaced  by
"bs->regs" field for all I/O operation.

Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-28 00:24:50 +00:00
juhosg
b6c5f4a8e7 gemini: enable GPIO sysfs interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24839 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-27 08:10:05 +00:00
cshore
612cc293e1 Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size. 
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24838 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-26 04:18:13 +00:00
cshore
c91e2ce710 base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it. 
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24836 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-26 04:18:04 +00:00
cshore
cafdb5f942 mtd flashmap: Switched to calculating the rootfs size rather than depending on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero. 
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24834 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-26 04:17:56 +00:00
claudio
a8cab73a4c [at91] Import an experimental ADC driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24814 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-23 15:20:26 +00:00
juhosg
8daecfbcff ar71xx: add support for TL-WR740N v1 
Same as TL-WR741ND but with different hardware ID and without
detachable antenna.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24811 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-23 12:42:16 +00:00
kaloz
f4380ab731 [target/avr32]: upgrade u-boot to v2010.12 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24810 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-23 00:08:55 +00:00
hauke
011ddd359b kernel: add config option added in kernel 2.6.37-rc7 to generic and run make kernel_oldconfig for brcm47xx. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24805 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-22 19:44:54 +00:00
hauke
4607d4ead2 kernel: refresh patches with kernel 2.6.37-rc7 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-22 19:43:25 +00:00
hauke
9e9c3a1798 brcm47xx: refresh patches with kernel 2.6.37-rc7 
The deleted patches went upstream in 2.6.37-rc7


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-22 19:42:37 +00:00
hauke
6f210ed73c uml: this patch went upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24802 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-22 18:20:50 +00:00
hauke
fb3616ed90 adm5120: make patches apply again and refresh them 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24800 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-22 17:19:36 +00:00
hauke
70befa4020 kernel: use tab in front of ledtrig-netdev.o and refresh kernel 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24798 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-22 17:18:11 +00:00
hauke
0d64872f8e brcm47xx: wgt634u mac address fix 
The Netgear wgt634u uses minus between the hex digest of the mac 
address and all other broadcom devices are using colons between the hex 
digest. Now the mac address is correctly parsed also when minus is used.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24749 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-21 13:34:09 +00:00
blogic
9236d3bed9 [lantiq] 
* fixes duplicate registration of dwc_otg usb core


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24738 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-20 17:56:09 +00:00
claudio
898076f479 [ar71xx] unifi: add sysupgrade and leds support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24737 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-20 17:28:34 +00:00
nbd
a3978a4a41 mpc85xx: fix up kernel config and make the target boot on the MPC8568E-MDS-PB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24736 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-20 14:25:25 +00:00
jow
eaa631d6d8 [generic] fix layer7 patches for Kernels >= 2.6.35, thanks Daniel Gimpelevich 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24728 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-19 16:46:47 +00:00
nbd
ee10caa56c ar71xx: enable ar7240 switch support on the UBNT NanoStation M 
Fixes broadcast frames on the second ethernet MAC

Signed-off-by: Alexander Couzens <lynxis@c-base.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24723 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-19 11:56:42 +00:00
juhosg
af62c5dff0 ar71xx: fix micrel phy patch (Patch from #8041.) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24718 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-19 10:05:55 +00:00
juhosg
010807acc0 generic: fix min/max confusion in jffs2_sum_init on 2.6.32 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24652 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 20:34:26 +00:00
juhosg
1f36168c60 ar71xx: remove stray semicolons 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24651 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:57:20 +00:00
juhosg
1eb912f20a ar71xx: fix WLAN LEDs on the DIR-825 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24650 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:21 +00:00
juhosg
3e6bf9586d ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24649 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:19 +00:00
juhosg
133f6e8495 ar71xx: use usbdev trigger for USB LEDs by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24648 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:16 +00:00
juhosg
f7a210d168 generic: add LED trigger for USB device presence/activity 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24646 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:11 +00:00
juhosg
9d26c3eda1 generic: add usb_find_device_by_name helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24645 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:08 +00:00
juhosg
97b250affa generic: nuke 2.6.33 specific stuff, is not used by any platform 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24644 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:04 +00:00
juhosg
579e608a9b ar71xx: UBNT Secondary MAC address duplicate fix 
There is Secondary MAC address duplicate problem with some UBNT
RouterStation and RouterStation Pro HW batches as Primary MAC addresses
are not increased by 2 per device in board data. Fix is to use 'Locally
Administrated bit' for Secondary MAC address instead of increasing
Primary MAC addresses by 1 which could overlap with other device
Primary MAC address.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24643 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:01 +00:00
juhosg
84ea49f558 ar71xx: populate LED configuration for WZR-HP-G300NH 
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24642 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:09:57 +00:00
hauke
83e00dce42 brcm47xx: add ssb debug option. 
This fixes a problem with wrt350n. 
It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS"

Thank you sn9 for fixing this problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:35:59 +00:00
hauke
22d5936ba2 brcm47xx: add some missing pci ID for tg3 driver 
Broadcom removed these pci id, but at least the wrt350n has a Ethernet
controller with a pci id of 14e4:1676

Thank you sn9 for fixing this problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24625 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:31:05 +00:00
hauke
ff51b55992 brcm47xx: this patch went upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:26:55 +00:00
juhosg
2427a1a5f9 ar71xx: add wlan led for the TL-WR941ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24612 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 19:55:50 +00:00
juhosg
786449614f ar71xx: UBNT M-Series MAC address fix 
UBNT M-Series devices have 2 MAC addresses in board data.
Fix is to use both entries from board data instead of one entry.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24611 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 19:55:47 +00:00
kaloz
7a9fbd9d70 revert r24604 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 12:24:27 +00:00
acoul
c86e814be4 target/linux: clean up non generic & obsolete kernel options for 2.6.36, 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 12:15:46 +00:00
juhosg
5270be5f80 ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24569 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 18:01:04 +00:00
juhosg
6cc1945af5 ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 18:01:00 +00:00
blogic
d6de09a810 [lantiq] 
* make the usb gpio configurable
* 105-header_xway.patch has a corrupt line count in it


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 13:02:49 +00:00
juhosg
c4174021ac ramips: remove 2.6.3[24] support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:31 +00:00
juhosg
a12045ff00 ramips: switch to 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:29 +00:00
juhosg
779b986847 ramips: handle OTG interrupt on the RT305x SoC 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:25 +00:00
kaloz
26090b8684 [sparc]: bump kernel version, add MAINTAINER entry 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24559 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 07:58:24 +00:00
kaloz
386183ac6e add plemininary ultrasparc support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24558 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 07:57:22 +00:00
hcg
391e5d3423 [gumstix] Update package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24544 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 12:59:22 +00:00
jow
75f4300764 [kirkwood] enable mach support for OpenRD Base and OpenRD Client (#8417), spare the rest 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 10:06:40 +00:00
nbd
574f469e14 base-files: use shutdown instead of stop when the system goes down (patch by tripolar) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 08:01:21 +00:00
blogic
18a076fccd [lantiq] adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-12 22:57:16 +00:00
hauke
9f96922892 kernel: update kernel versions 
Update kernel 2.6.32.26 to 2.6.32.27
Update kenrel 2.6.36.1 to 2.6.36.2


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-11 16:07:21 +00:00
juhosg
29d3358e2b ar71xx: add missing files for the JA76PF board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 19:55:28 +00:00
cshore
636113691a [brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24442 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 18:59:58 +00:00
juhosg
9bdc5b83af ar71xx: add support for the jjPlus JA79PF 
Patch-by: Cezary Jackiewicz

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:51 +00:00
juhosg
ddbca99fbc ar71xx: add support for the TP-LINK TL-MR3220 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:48 +00:00
juhosg
c7e80fcfbb ar71xx: add default network configuration file for the TL-MR3420 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24437 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:40 +00:00
nbd
c5d8ec2df5 ar71xx: do not throw compile errors if the nbg460n uboot is not selected 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24426 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 16:07:27 +00:00
juhosg
12e58b40f8 ar71xx: select u-boot for the NBG460N in the Default/Minimal profiles as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24421 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 15:17:08 +00:00
juhosg
680d895a87 ar71xx: add nbg460n image generation 
This adds image generation for NBG460N/550N/550NH boards.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 15:17:03 +00:00
acoul
da5f577b16 linux/generic: update & refresh 2.6.36 & 2.6.37. (closes #8324) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24370 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 21:20:40 +00:00
kaloz
ca1f565dd9 add optimization to Freescale targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24341 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 11:27:06 +00:00
juhosg
602f2d5e4f ramips: ramips_esw: add more definitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24340 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:33 +00:00
juhosg
ec52e89b08 ramips: ramips_esw: add helper function to set pvid 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24339 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:28 +00:00
juhosg
4059133e7d ramips: ramips_esw: add helper function to set vlan members 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24338 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:25 +00:00
juhosg
9e9816322c ramips: ramips_esw: add helper function to set VLAN id 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:22 +00:00
juhosg
293e4ff8cc ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24336 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:16 +00:00
juhosg
8b6afc3a6a ramips: ramips_esw: use rt305x_esw prefix in function names 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24335 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:14 +00:00
juhosg
808e953c0a ramips: ramips_esw: coding style cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24334 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:12 +00:00
juhosg
39deae4b99 ramips: ramips_esw: add defines for switch register offsets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24333 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:07 +00:00
juhosg
1600b801ec ramips: ramips_esw: don't touch GPIO_PURPOSE register 
It must have been set by the board initialization code.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24332 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:04 +00:00
juhosg
bc4cb1b39f ramips: ramips_esw: convert it to be a platform driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:00 +00:00
juhosg
a3373ca948 ramips: ramips_esw: move hardware initialization into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24330 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:14:58 +00:00
juhosg
1fcc0bf36c ramips: ramips_esw: use a private structure for the functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24329 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:14:54 +00:00
kaloz
fa9c65f417 ethernet driver fixup for ppc4xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24328 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 08:59:31 +00:00
cshore
deb8dba13c [brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24316 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:31 +00:00
cshore
a2e7591047 [brcm63xx] Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24315 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:28 +00:00
cshore
860ae4cdbc [brcm63xx] Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24314 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:24 +00:00
cshore
94d30e3699 [generic] flash_chips: Added Macronix MX29LV640T Flash Chip support previously mistakenly added to brcm63xx. Thanks blunoise. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24313 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 19:45:08 +00:00
cshore
87b570ee61 [brcm63xx] patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24310 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 17:32:29 +00:00
cshore
c73f40600d Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T." 
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.

It belongs in generic not brcm63xx.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24308 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 17:02:31 +00:00
cshore
eea5cc41dc [brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. 
Thanks blunoise

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24307 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 16:42:23 +00:00
cshore
6e4ddb80d8 [brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24305 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:54 +00:00
cshore
332453076d [brcm63xx] patches: Refreshed patches after led_count 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24304 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:51 +00:00
cshore
164cf26c5b [brcm63xx] board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24303 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:47 +00:00
cshore
27a7d97c15 [brcm63xx] Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24302 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:41 +00:00
hauke
a08050a048 kernel: fix cryptodev with kernel >= 2.6.35 
The fix is from http://sourceforge.net/mailarchive/forum.php?thread_name=20100906035717.GA7562%40mcafee.com&forum_name=ocf-linux-users

Thank you tripolar for reporting the issue and finding a solution for it.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24286 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 17:01:10 +00:00
cshore
91050b8f9f [brcm63xx] base-files: Added the preinit information for reset button and preinit indication led, and preinit interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24276 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 06:46:03 +00:00
cshore
d2ca272aee [brcm63xx] board definition: Fixed CPVA642 LED definitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24275 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 06:45:57 +00:00
cshore
cbe5202762 [brcm63xx] board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24274 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 04:31:23 +00:00
cshore
87689d1064 [bcm63xx] base-files: Added network defconfig because board only has one ethernet (4-port switch) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24273 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 02:01:08 +00:00
juhosg
5d6fe3e144 ramips: add support for 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24270 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 20:14:38 +00:00
juhosg
50fe7cc694 ramips: default profile fix 
Fix package names in default profiles.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24269 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 20:14:35 +00:00
juhosg
8b65736401 ramips: use tabs instead of spaces in mach-f5d8235-v2.c 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24268 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 20:14:30 +00:00
hauke
4b7e8fd5aa brcm47xx: do not read from CFE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24267 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 19:20:26 +00:00
hauke
2308d83efb brcm47xx: backport patch from kernel 2.6.37 
Backport patches from r24162
  brcm47xx: reorder patches like they were commitet upstream


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24266 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 19:19:50 +00:00
hauke
2c5bea6134 brcm47xx: use on common files dir 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24264 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 18:34:58 +00:00
kaloz
e82b1d80fc [target/mpc85xx]: preliminary support for Freescale MPC85xx based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24259 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 11:38:59 +00:00
nbd
cb875ff79e ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24236 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-04 01:32:15 +00:00
kaloz
56f5e0b05a [mpc83xx]: remove unused kernel versions, make 2.6.36 the default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24223 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-03 09:19:52 +00:00
hauke
08e8737994 brcm47xx: Add edimax PS1208mfg support 
Thank you clemvangelis for the patches. (closes #7672)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-02 21:27:54 +00:00
jow
db07bdac3e [ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24215 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-02 20:19:55 +00:00
juhosg
09a8407a2d ar71xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24210 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-01 18:40:01 +00:00
juhosg
f21a26a90b generic: yet another missing config symbol for 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24208 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-01 18:39:55 +00:00
jow
848e1c833e [ar71xx] add a new image for the TEW-652BRP which can be used with the bootloader recovery option 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24196 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-30 02:04:57 +00:00
jow
291a485ace [kernel] backport two changes from kernel.org: 
65e9b62d4503849b10bedfc29bff0473760cc597
ipv6: add special mode accept_ra=2 to accept RA while configured as router

c3bccac2fa76f1619dfe4fb7b9bee69de7f066d8
ipv6: add special mode forwarding=2 to send RS while configured as router


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24195 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-30 01:52:51 +00:00
cshore
191062a0ed [brcm63xx] image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24191 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:13:00 +00:00
cshore
f7a2edf410 bcm63xx: Add support for the T-Com Speedport W 500V. 
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:44 +00:00
cshore
9dd6c43103 bcm63xx: Add board id override fixup. 
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.

Also modify the image generation to generate apropriately tagged images.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:40 +00:00
cshore
d26482830e bcm63xx: Finalize support for DSL-274xB, rev C2. 
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:36 +00:00
cshore
36faccabad bcm63xx: Allow 'colored' power leds. 
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:30 +00:00
cshore
74fd46691e bcm63xx: Don't hardcode the switch ethernet interface in preinit. 
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:26 +00:00
cshore
2ce35911df bcm63xx: Add defconfigs. 
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:19 +00:00
florian
f0589f7290 [ar7] refresh patches and remove trailing whitespaces 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24181 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:14:34 +00:00
florian
90dd053819 [ar7] refresh and refine 972-cpmac_multi_probe.patch, patch from sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24180 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:56 +00:00
florian
45f1499380 [ar7] refresh 973-cpmac_handle_mvswitch.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24179 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:48 +00:00
florian
71bfc1ff04 [ar7] refresh and refine vlynq patch, patch from sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24178 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:42 +00:00
hauke
cae14a6a2e brcm47xx: remove support for old kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24168 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 14:08:04 +00:00
hauke
9d386c901e brcm47xx: use kernel 2.6.36.1 as new default kernel for this target. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24167 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 14:05:31 +00:00
hauke
cfe0566cfd kernel: add missing config symbols for 2.6.37-rc3 
Thank you maddes for reporting. (closes #8323)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 11:14:25 +00:00
hauke
eb0da340cb brcm47xx: reorder patches like they were commitet upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 22:47:11 +00:00
nbd
0726c0de70 remove CONFIG_ADM6996_PHY=y for ar7 and atheros - this driver is incomplete and should not be used yet 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24161 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 22:40:26 +00:00
hauke
53f5427aef kernel: add missing config option 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24157 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 16:08:41 +00:00
florian
ae6fa6a361 [ar7] patch 972-cpmac_multi_probe.patch correctly, thanks sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 12:18:41 +00:00
florian
2e825b7d5b [ar7] rename 973-cpmac_handle_mvswitch.c to 973-cpmac_handle_mvswitch.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24141 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 12:18:36 +00:00
florian
1a32a83a20 [ar7] handle mvswitch in cpmac, rework MII probing logic, patch from sn9 and Wipster 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24140 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 11:58:02 +00:00
florian
87ae2b3271 [ar7] handle new revisions of vlynq wrt reset sequence, patch from sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24139 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 11:57:57 +00:00
florian
61b72678e6 [ar7] increase flash window size to 32MiB, patch from sn9. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24138 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 11:57:52 +00:00
kaloz
d053fa7af0 update to the latest stable kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24136 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 18:50:11 +00:00
cshore
0760ba4d65 [brcm63xx] image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24127 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 11:06:13 +00:00
juhosg
ed0adccdff ramips: add support for Belkin F5D8235 v2 board 
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:23 +00:00
juhosg
dbdef16088 generic: add rtl8366rb switch vlan fid support 
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:21 +00:00
juhosg
d59a23df99 ramips: Use NET_IP_ALIGN instead of hardcoding 2 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24124 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:18 +00:00
juhosg
37b545f00f ramips: DMA map the correct RX skb size 
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24123 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:16 +00:00
juhosg
c523394925 ramips: Don't trigger BUG_ON due to skb allocation failure 
Instead just drop the rx'ed frame silently and reuse the already
available buffer.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24122 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:12 +00:00