qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 20:28:58 +02:00
Code
17,277 Commits 13 Branches 0 Tags 117 MiB
749a982db7
Commit Graph

191 Commits

Author SHA1 Message Date
kaloz
ed7e1fcda4 final fix for BCM5354 USB cores, hopefully 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12499 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-09-02 11:28:57 +00:00
florian
9a935f099a Package ip6t_limit and ip6t_frag for 2.4 kernels (#3760) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12276 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-08-11 06:38:48 +00:00
juhosg
2307fc302d [brcm-2.4] fix Dell TrueMobile 2300 v1/v2 detection and network configuration (closes #2788) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11935 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-07-26 16:10:44 +00:00
thepeople
b8eb82f5d3 fix sierra patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11909 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-07-22 15:16:43 +00:00
thepeople
da1c9cf11b This is the Linksys-ported driver from WRT54G3G-ST_v2.00.9_US.tgz, 
re-based against 2.4.35 and repaired for obvious breakage (didn't use
its device table, etc.).

Changes from Linksys tree:
 - Remove 'vendor' and 'product' parameters; these aren't used in the
mainstream driver and seem to only have served to break it.
 - Remove bogus 'sierra_device_ids' table, used with above.
 - Changed references to 'sierra_device_ids' back to id_table
 - Changed non-standard CONFIG_USB_SERIAL_SIERRA_3G (line 886) to
current module standard CONFIG_USB_SERIAL_SIERRAWIRELESS
 - Added #include to enable pl2303 hack to remain until I can figure
out if it's still necessary.
Signed-off-by:  RB <aoz.syn@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11899 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-07-21 20:40:14 +00:00
thepeople
81504d5ab6 This series of patches closes the support gap on one of the explicitly 
supported platforms (WRT54G3G) by adding direct support for the Sierra
Wireless 3G modems.
Signed-off-by:  RB <aoz.syn@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11898 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-07-21 20:36:16 +00:00
nbd
27e96c3c29 (5/6) bcm57xx: bcm4785 incomplete reboot 
I noticed my wrt350n would not reliably reboot after entering
the reboot command.  I found this code in the source for the
wrt600n.  It corrects the problem, and the wrt350n reboots
reliably now.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11470 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-15 11:10:43 +00:00
nbd
f833889761 (3/6) bcm57xx: preinit 
This patch allows the bcm57xx module to work correctly with failsafe mode.

insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately.  This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.

The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11468 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-15 11:10:13 +00:00
nbd
8d0837caa2 (2/6) bcm57xx: netconfig 
Update the netconfig script to support boardtype 0x478.  I've tested this
on the wrt350n, hopefully it will match the 600n as well.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11467 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-15 11:09:49 +00:00
noz
0596c05d60 [brcm-2.4 and brcm47xx] Include missing part of r11275. Fix fw_argX from CFE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11340 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-03 19:29:53 +00:00
noz
60bfafb866 Don't nuke fw_argX from CFE - Thanks jhansen 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11275 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-27 15:01:07 +00:00
juhosg
5591c13267 [brcm-2.4] refresh kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11214 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-19 13:45:06 +00:00
thepeople
8c98e14900 This patch lets netconfig support the asus wl-500w. Signed-off-by: Ben Pfountz <netprince@vt.edu> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11070 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-08 01:30:14 +00:00
agb
ed61966d68 Add a generic Broadcom USB profile. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-03-31 08:05:30 +00:00
agb
9798e364f6 Change WL500gP profile to use uhci-iv (#1589) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10694 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-03-31 08:05:13 +00:00
agb
9325eaaa8c Add support for the WL-500gP v2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10693 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-03-31 08:04:56 +00:00
nbd
c9d961131c add wrt350n image file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10205 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-01-16 03:39:59 +00:00
florian
209f76b1df Add back Sitecom WL-105b support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-01-08 14:27:48 +00:00
nbd
90fba37c49 update brcm-2.4 to 2.4.35.4, integrate new broadcom system code, update broadcom-wl to a contributed version (v4.150.10.5) - no bcm57xx support yet, will follow shortly 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10137 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-01-06 19:28:07 +00:00
kaloz
3d0d2525e7 bump version numbers of Linksys images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10097 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-01-03 21:28:56 +00:00
florian
8afdee9032 Add bcm5354 patch from #2754 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9684 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-12-09 15:51:45 +00:00
nbd
2fa2282b6f create broadcom initramfs images and move the lzma decompressor area a bit further 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-11-16 03:11:17 +00:00
nbd
f56b55940b make the image filenames a bit shorter 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-11-10 23:08:11 +00:00
nbd
7431c1813f update wrt54g3g pattern version, add wrt54g3g-em pattern (#2663) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9523 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-11-10 15:45:38 +00:00
ryd
aa3d44691c fix missing CONFIG_USB_BLUETOOTH issue 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9494 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-11-03 22:32:54 +00:00
juhosg
7aa11efc17 get rid of per-profile base-files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9069 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-29 14:27:54 +00:00
juhosg
38e3914d5b [brcm-2.4] fix vlan configuration on Dell TrueMobile 2300 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9015 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-25 08:34:30 +00:00
nico
a8265302c3 refresh brcm-2.4 kconfig 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8949 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-22 15:06:15 +00:00
nbd
de5584e77a clean up jffs2 config options 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-19 20:58:16 +00:00
florian
c89d2f226c Add preliminary support for sysupgrade on brcm 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8718 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-09 19:18:02 +00:00
nbd
ceee90ffd2 adapt profiles for subtarget changes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-08 20:04:43 +00:00
nbd
6db7ad74f6 major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-08 19:55:42 +00:00
nbd
c8bff13a74 fix pci init for brcm-2.4 with atheros wifi cards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8690 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-08 13:39:34 +00:00
nbd
a8c9d0167e remove some obsolete files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8654 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-06 16:40:36 +00:00
nbd
17c7b6c3fd strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-06 16:27:37 +00:00
mbm
26be763517 workaround for timer glitch on some boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8483 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-08-25 13:18:58 +00:00
mbm
c2e9789198 fix wan configuration on wr850g v2/v3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8482 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-08-25 12:27:01 +00:00
florian
da62128d18 Add usb-keyspan modules (#2229) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-08-21 09:42:25 +00:00
nbd
12c49b6a6a build system cleanup/restructuring as described in http://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.html 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8362 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-08-07 00:04:25 +00:00
nbd
c49b0723e2 add failsafe support for atheros-2.6 (#1501) - only works with ar5315+ at the moment 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7870 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-07-04 04:35:44 +00:00
nbd
3462ef2525 move parts of the failsafe code to the generic base-files - will be used on atheros as well as soon as i've added support for it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7810 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-06-30 21:09:02 +00:00
nbd
6a140db132 make the broadcom firmware image code more sane and also fix jffs2-256k related bugs (#1888) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7731 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-06-25 15:36:31 +00:00
nbd
1d5d64e647 fix failsafe on broadcom, send netlink events in diag when running linux 2.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7722 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-06-25 08:32:25 +00:00
florian
50795a07db Really apply the esfq patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7623 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-06-13 19:12:44 +00:00
florian
1cdba29c7d Resync brcm-2.4 kernel config and enable syncookies (#1876) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7622 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-06-13 18:50:51 +00:00
kaloz
e799c14a2d enable image generation for the WRT150N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-06-04 09:26:40 +00:00
nbd
74263c7c57 fix pcmcia/pccard build defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7275 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-05-19 16:16:48 +00:00
nbd
0c0407178e Fix broadcom squashfs images: 
We switched over to appending the jffs2 eof mark to the squashfs images, 
but since the squashfs is not always aligned to eraseblocksize, the eof
mark landed in the wrong place. This commit adds an extra flag to the
trx utility that can append extra data to a partition with alignment.
This is used to place the jffs2 eof mark at the right offset.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7253 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-05-15 18:41:48 +00:00
mbm
3c976d4432 cleanup the broadcom preinit.arch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7176 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-05-10 16:29:15 +00:00
nbd
9659555c0c minor cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7174 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-05-10 14:43:52 +00:00
mbm
de0bb1d6c4 unified preinit environment 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7173 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-05-10 14:37:47 +00:00
nbd
38c6cb915b broadcom: rename the OpenWrt partition to rootfs_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7171 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-05-10 12:38:31 +00:00
nbd
71d706f4a1 bring up the ethernet driver before loading the switch drivers on broadcom (fixes #1520) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-05-07 17:37:05 +00:00
nbd
1758bca385 revert to the previous version of the flash map driver - committed the wrong one in [7092] 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7118 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-05-06 18:30:53 +00:00
nbd
2d6b53deec use hotplug2 for serializing hotplug events on 2.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7097 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-05-05 18:33:18 +00:00
nbd
968f760ebb add wl-hdd ide workaround from #272 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7093 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-05-04 22:14:14 +00:00
nbd
7ed9009bbd convert brcm-2.4 to the new target structure 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7092 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-05-04 22:13:42 +00:00
nbd
83790f74ad Improved autorebuild for kernel related stuff. 
- make modules_install in the kernel tree is no longer called
- make modules is called on every target/compile run
- kmod packages pull the kernel modules directly out of the kernel tree and have proper file depends on them



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6998 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-04-18 12:28:38 +00:00
florian
f4c4e94a16 Build usbnet modules for brcm targets (#1481) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6955 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-04-15 14:47:40 +00:00
florian
6298554018 Add kmod-usb-uhci instead of ohci as defaults for WL500GP (#1589) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6954 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-04-15 14:10:39 +00:00
florian
a9d604c520 Limit the number of hotplug childrens 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-04-01 18:30:32 +00:00
mbm
2d335117cf more devfs related bugs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6543 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-09 18:39:34 +00:00
nbd
e7bcfad835 fix up the netconfig script after the devfs=>hotplug2 migration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6542 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-09 18:20:54 +00:00
nbd
1c92134bda more hotplug2/mdev/devfs related fixups, this time for broadcom 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6519 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-04 23:55:07 +00:00
nbd
4efb08ae2d reorder target profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-04 20:43:39 +00:00
nbd
203cccc4a2 nuke mdev and replace it with hotplug2 :) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-04 20:31:53 +00:00
nbd
5a54b951bb fix mdev for broadcom 2.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6484 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-03 22:40:28 +00:00
nbd
c94c88df80 replace some hardcoded /dev/mtdblock/* references with calls to find_mtd_part() 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6477 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-03 19:22:41 +00:00
pavlov
9bc5d8548f split out profile definitions from Makefiles 
structure is as follows:
target/linux/<arch>/profiles/<profilename>.mk

These files are included by a blob match in the target Makefile

The files should be labeled based on their profile Name in the definition



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6468 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-02 23:02:38 +00:00
pavlov
f5ab57b335 commit profile support for base-files... patches still need to be done 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6465 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-02 18:17:40 +00:00
nbd
9bf71c00ca move mtd rootfs split patch to generic-2.6, disabled for broadcom targets until the flash map driver is updated and tested 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6449 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-01 23:52:19 +00:00
nbd
636f4cc8ac clean up a few things in image build makefiles and fix unnecessary grub rebuilds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6360 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-02-25 18:20:34 +00:00
nbd
9638a3c6a3 add missing config files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6338 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-02-22 03:44:37 +00:00
nbd
c87668dc4f Reorganize kernel configs - target/linux/*/config is now a directory. 
./config/default will replace the old config and config-diff (format is like 
config-diff, the full kernel config is no longer kept in the build system)
This commit removes all the kernel config stuff, the next one will add
the replacement - there's no way to do this atomically with svn.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-02-22 03:44:15 +00:00
nbd
b89ba4c713 port [6229] to kamikaze 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6275 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-02-08 01:25:18 +00:00
nbd
fca1e28839 Add WL-700gE support (based on work by jr) 
Includes kernel/diag patch and a new target profile


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-20 12:35:00 +00:00
nbd
3d1e9d6944 add descriptions to the broadcom target profiles and export them to the target metadata (not presented in menuconfig yet) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6137 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-20 02:30:36 +00:00
nbd
591810182c remove bogus part of the broadcom target descriptions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6109 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-16 02:16:03 +00:00
nbd
0dcc8eefcb move several instances of DEFAULT:=y to profile preselections (easier for the image builder to pick up) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6096 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-14 17:56:42 +00:00
nbd
3a5b49ea7f bump version numbers of linksys images, because the linksys firmware often refuses to downgrade 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6074 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-11 09:54:51 +00:00
nbd
45e49953d0 don't exit from failsafe mode after the console shell quits (some devices don't have /dev/console) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6020 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-07 17:38:29 +00:00
nbd
7ac291d1fc add a netconfig override for the wl-500g (fixes #1116) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6016 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-07 15:41:47 +00:00
nbd
67154b6162 move brcm-2.6/image to brcm-2.4, to reduce the cross-dependencies between those two. symlink will be added in the next commit (i don't think svn can do that change atomically) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6013 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-07 15:25:26 +00:00
florian
0e8d9b0298 Add Intel/VIA usb-uhci support (#1098) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5913 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-12-28 00:56:39 +00:00
nbd
f4d24919d4 store the default kernel version for our ports in a single place (target makefiles can still override it if necessary) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5899 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-12-25 09:12:57 +00:00
nbd
6933f718b4 better network config support for bcm94704 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5775 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-12-12 23:55:14 +00:00
nbd
145b0ea3ff disable broadcom jffs2 images by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5773 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-12-12 23:20:05 +00:00
florian
ec9c075c75 Enable msdos fs support and package it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5741 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-12-09 19:47:32 +00:00
mbm
9e0a57b449 move target/image/platform to target/linux/platform/image 
platform directories are now self contained


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5669 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-28 20:14:41 +00:00
nbd
28398504ad fix brcm-2.4 target profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5658 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-27 05:25:42 +00:00
nbd
ed1b2eb613 add a workaround for a race-condition in the wl driver (triggered by ap+sta mode in a bridge) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5635 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-24 01:48:23 +00:00
nbd
e29da0f423 upgrade to linux 2.4.33.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5634 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-24 00:56:51 +00:00
nbd
356535ffd7 move platform specific base-files into target/linux/<targetname> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5621 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-22 23:27:29 +00:00
nbd
2c38903c12 autodetect atm, pci, usb, pcmcia features from kernel config file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5586 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-19 20:30:11 +00:00
nbd
74a5d18a1f reorganize nat helper packages, move ftp and irc nat to a package that is enabled by default, for security reasons - see #917 for more information 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5581 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-19 01:03:47 +00:00
nbd
3e3c12b84b add a few missing exports 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-17 04:01:56 +00:00
nbd
26b6b5bdd1 upgrade to broadcom wl driver version 4.80.53.0 (from wrt350n release) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5546 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-17 03:54:33 +00:00
nbd
4e778f2d1d add mini_fo 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-17 02:50:09 +00:00
nbd
e34a6e1803 reorder variables 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-12 05:09:56 +00:00
nbd
5be70dfb57 implement target profiles in menuconfig 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-12 05:06:56 +00:00