qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-28 08:29:42 +02:00
Code
19,336 Commits 13 Branches 0 Tags 117 MiB
784b0f3ae6
Commit Graph

7042 Commits

Author SHA1 Message Date
juhosg
3e6bf9586d ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24649 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:19 +00:00
juhosg
133f6e8495 ar71xx: use usbdev trigger for USB LEDs by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24648 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:16 +00:00
juhosg
f7a210d168 generic: add LED trigger for USB device presence/activity 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24646 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:11 +00:00
juhosg
9d26c3eda1 generic: add usb_find_device_by_name helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24645 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:08 +00:00
juhosg
97b250affa generic: nuke 2.6.33 specific stuff, is not used by any platform 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24644 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:04 +00:00
juhosg
579e608a9b ar71xx: UBNT Secondary MAC address duplicate fix 
There is Secondary MAC address duplicate problem with some UBNT
RouterStation and RouterStation Pro HW batches as Primary MAC addresses
are not increased by 2 per device in board data. Fix is to use 'Locally
Administrated bit' for Secondary MAC address instead of increasing
Primary MAC addresses by 1 which could overlap with other device
Primary MAC address.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24643 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:01 +00:00
juhosg
84ea49f558 ar71xx: populate LED configuration for WZR-HP-G300NH 
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24642 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:09:57 +00:00
hauke
83e00dce42 brcm47xx: add ssb debug option. 
This fixes a problem with wrt350n. 
It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS"

Thank you sn9 for fixing this problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:35:59 +00:00
hauke
22d5936ba2 brcm47xx: add some missing pci ID for tg3 driver 
Broadcom removed these pci id, but at least the wrt350n has a Ethernet
controller with a pci id of 14e4:1676

Thank you sn9 for fixing this problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24625 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:31:05 +00:00
hauke
ff51b55992 brcm47xx: this patch went upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:26:55 +00:00
juhosg
2427a1a5f9 ar71xx: add wlan led for the TL-WR941ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24612 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 19:55:50 +00:00
juhosg
786449614f ar71xx: UBNT M-Series MAC address fix 
UBNT M-Series devices have 2 MAC addresses in board data.
Fix is to use both entries from board data instead of one entry.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24611 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 19:55:47 +00:00
kaloz
7a9fbd9d70 revert r24604 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 12:24:27 +00:00
acoul
c86e814be4 target/linux: clean up non generic & obsolete kernel options for 2.6.36, 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 12:15:46 +00:00
juhosg
5270be5f80 ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24569 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 18:01:04 +00:00
juhosg
6cc1945af5 ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 18:01:00 +00:00
blogic
d6de09a810 [lantiq] 
* make the usb gpio configurable
* 105-header_xway.patch has a corrupt line count in it


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 13:02:49 +00:00
juhosg
c4174021ac ramips: remove 2.6.3[24] support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:31 +00:00
juhosg
a12045ff00 ramips: switch to 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:29 +00:00
juhosg
779b986847 ramips: handle OTG interrupt on the RT305x SoC 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:25 +00:00
kaloz
26090b8684 [sparc]: bump kernel version, add MAINTAINER entry 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24559 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 07:58:24 +00:00
kaloz
386183ac6e add plemininary ultrasparc support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24558 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 07:57:22 +00:00
hcg
391e5d3423 [gumstix] Update package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24544 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 12:59:22 +00:00
jow
75f4300764 [kirkwood] enable mach support for OpenRD Base and OpenRD Client (#8417), spare the rest 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 10:06:40 +00:00
nbd
574f469e14 base-files: use shutdown instead of stop when the system goes down (patch by tripolar) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 08:01:21 +00:00
blogic
18a076fccd [lantiq] adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-12 22:57:16 +00:00
hauke
9f96922892 kernel: update kernel versions 
Update kernel 2.6.32.26 to 2.6.32.27
Update kenrel 2.6.36.1 to 2.6.36.2


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-11 16:07:21 +00:00
juhosg
29d3358e2b ar71xx: add missing files for the JA76PF board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 19:55:28 +00:00
cshore
636113691a [brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24442 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 18:59:58 +00:00
juhosg
9bdc5b83af ar71xx: add support for the jjPlus JA79PF 
Patch-by: Cezary Jackiewicz

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:51 +00:00
juhosg
ddbca99fbc ar71xx: add support for the TP-LINK TL-MR3220 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:48 +00:00
juhosg
c7e80fcfbb ar71xx: add default network configuration file for the TL-MR3420 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24437 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:40 +00:00
nbd
c5d8ec2df5 ar71xx: do not throw compile errors if the nbg460n uboot is not selected 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24426 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 16:07:27 +00:00
juhosg
12e58b40f8 ar71xx: select u-boot for the NBG460N in the Default/Minimal profiles as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24421 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 15:17:08 +00:00
juhosg
680d895a87 ar71xx: add nbg460n image generation 
This adds image generation for NBG460N/550N/550NH boards.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 15:17:03 +00:00
acoul
da5f577b16 linux/generic: update & refresh 2.6.36 & 2.6.37. (closes #8324) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24370 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 21:20:40 +00:00
kaloz
ca1f565dd9 add optimization to Freescale targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24341 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 11:27:06 +00:00
juhosg
602f2d5e4f ramips: ramips_esw: add more definitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24340 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:33 +00:00
juhosg
ec52e89b08 ramips: ramips_esw: add helper function to set pvid 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24339 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:28 +00:00
juhosg
4059133e7d ramips: ramips_esw: add helper function to set vlan members 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24338 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:25 +00:00
juhosg
9e9816322c ramips: ramips_esw: add helper function to set VLAN id 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:22 +00:00
juhosg
293e4ff8cc ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24336 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:16 +00:00
juhosg
8b6afc3a6a ramips: ramips_esw: use rt305x_esw prefix in function names 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24335 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:14 +00:00
juhosg
808e953c0a ramips: ramips_esw: coding style cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24334 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:12 +00:00
juhosg
39deae4b99 ramips: ramips_esw: add defines for switch register offsets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24333 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:07 +00:00
juhosg
1600b801ec ramips: ramips_esw: don't touch GPIO_PURPOSE register 
It must have been set by the board initialization code.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24332 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:04 +00:00
juhosg
bc4cb1b39f ramips: ramips_esw: convert it to be a platform driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:00 +00:00
juhosg
a3373ca948 ramips: ramips_esw: move hardware initialization into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24330 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:14:58 +00:00
juhosg
1fcc0bf36c ramips: ramips_esw: use a private structure for the functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24329 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:14:54 +00:00
kaloz
fa9c65f417 ethernet driver fixup for ppc4xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24328 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 08:59:31 +00:00
cshore
deb8dba13c [brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24316 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:31 +00:00
cshore
a2e7591047 [brcm63xx] Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24315 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:28 +00:00
cshore
860ae4cdbc [brcm63xx] Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24314 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:24 +00:00
cshore
94d30e3699 [generic] flash_chips: Added Macronix MX29LV640T Flash Chip support previously mistakenly added to brcm63xx. Thanks blunoise. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24313 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 19:45:08 +00:00
cshore
87b570ee61 [brcm63xx] patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24310 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 17:32:29 +00:00
cshore
c73f40600d Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T." 
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.

It belongs in generic not brcm63xx.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24308 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 17:02:31 +00:00
cshore
eea5cc41dc [brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. 
Thanks blunoise

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24307 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 16:42:23 +00:00
cshore
6e4ddb80d8 [brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24305 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:54 +00:00
cshore
332453076d [brcm63xx] patches: Refreshed patches after led_count 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24304 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:51 +00:00
cshore
164cf26c5b [brcm63xx] board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24303 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:47 +00:00
cshore
27a7d97c15 [brcm63xx] Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24302 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 15:15:41 +00:00
hauke
a08050a048 kernel: fix cryptodev with kernel >= 2.6.35 
The fix is from http://sourceforge.net/mailarchive/forum.php?thread_name=20100906035717.GA7562%40mcafee.com&forum_name=ocf-linux-users

Thank you tripolar for reporting the issue and finding a solution for it.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24286 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 17:01:10 +00:00
cshore
91050b8f9f [brcm63xx] base-files: Added the preinit information for reset button and preinit indication led, and preinit interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24276 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 06:46:03 +00:00
cshore
d2ca272aee [brcm63xx] board definition: Fixed CPVA642 LED definitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24275 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 06:45:57 +00:00
cshore
cbe5202762 [brcm63xx] board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24274 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 04:31:23 +00:00
cshore
87689d1064 [bcm63xx] base-files: Added network defconfig because board only has one ethernet (4-port switch) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24273 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-06 02:01:08 +00:00
juhosg
5d6fe3e144 ramips: add support for 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24270 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 20:14:38 +00:00
juhosg
50fe7cc694 ramips: default profile fix 
Fix package names in default profiles.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24269 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 20:14:35 +00:00
juhosg
8b65736401 ramips: use tabs instead of spaces in mach-f5d8235-v2.c 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24268 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 20:14:30 +00:00
hauke
4b7e8fd5aa brcm47xx: do not read from CFE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24267 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 19:20:26 +00:00
hauke
2308d83efb brcm47xx: backport patch from kernel 2.6.37 
Backport patches from r24162
  brcm47xx: reorder patches like they were commitet upstream


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24266 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 19:19:50 +00:00
hauke
2c5bea6134 brcm47xx: use on common files dir 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24264 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 18:34:58 +00:00
kaloz
e82b1d80fc [target/mpc85xx]: preliminary support for Freescale MPC85xx based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24259 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-05 11:38:59 +00:00
nbd
cb875ff79e ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24236 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-04 01:32:15 +00:00
kaloz
56f5e0b05a [mpc83xx]: remove unused kernel versions, make 2.6.36 the default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24223 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-03 09:19:52 +00:00
hauke
08e8737994 brcm47xx: Add edimax PS1208mfg support 
Thank you clemvangelis for the patches. (closes #7672)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-02 21:27:54 +00:00
jow
db07bdac3e [ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24215 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-02 20:19:55 +00:00
juhosg
09a8407a2d ar71xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24210 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-01 18:40:01 +00:00
juhosg
f21a26a90b generic: yet another missing config symbol for 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24208 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-01 18:39:55 +00:00
jow
848e1c833e [ar71xx] add a new image for the TEW-652BRP which can be used with the bootloader recovery option 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24196 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-30 02:04:57 +00:00
jow
291a485ace [kernel] backport two changes from kernel.org: 
65e9b62d4503849b10bedfc29bff0473760cc597
ipv6: add special mode accept_ra=2 to accept RA while configured as router

c3bccac2fa76f1619dfe4fb7b9bee69de7f066d8
ipv6: add special mode forwarding=2 to send RS while configured as router


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24195 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-30 01:52:51 +00:00
cshore
191062a0ed [brcm63xx] image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24191 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:13:00 +00:00
cshore
f7a2edf410 bcm63xx: Add support for the T-Com Speedport W 500V. 
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:44 +00:00
cshore
9dd6c43103 bcm63xx: Add board id override fixup. 
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.

Also modify the image generation to generate apropriately tagged images.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:40 +00:00
cshore
d26482830e bcm63xx: Finalize support for DSL-274xB, rev C2. 
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:36 +00:00
cshore
36faccabad bcm63xx: Allow 'colored' power leds. 
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:30 +00:00
cshore
74fd46691e bcm63xx: Don't hardcode the switch ethernet interface in preinit. 
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:26 +00:00
cshore
2ce35911df bcm63xx: Add defconfigs. 
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:19 +00:00
florian
f0589f7290 [ar7] refresh patches and remove trailing whitespaces 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24181 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:14:34 +00:00
florian
90dd053819 [ar7] refresh and refine 972-cpmac_multi_probe.patch, patch from sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24180 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:56 +00:00
florian
45f1499380 [ar7] refresh 973-cpmac_handle_mvswitch.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24179 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:48 +00:00
florian
71bfc1ff04 [ar7] refresh and refine vlynq patch, patch from sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24178 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:42 +00:00
hauke
cae14a6a2e brcm47xx: remove support for old kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24168 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 14:08:04 +00:00
hauke
9d386c901e brcm47xx: use kernel 2.6.36.1 as new default kernel for this target. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24167 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 14:05:31 +00:00
hauke
cfe0566cfd kernel: add missing config symbols for 2.6.37-rc3 
Thank you maddes for reporting. (closes #8323)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 11:14:25 +00:00
hauke
eb0da340cb brcm47xx: reorder patches like they were commitet upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 22:47:11 +00:00
nbd
0726c0de70 remove CONFIG_ADM6996_PHY=y for ar7 and atheros - this driver is incomplete and should not be used yet 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24161 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 22:40:26 +00:00
hauke
53f5427aef kernel: add missing config option 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24157 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 16:08:41 +00:00
florian
ae6fa6a361 [ar7] patch 972-cpmac_multi_probe.patch correctly, thanks sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 12:18:41 +00:00
florian
2e825b7d5b [ar7] rename 973-cpmac_handle_mvswitch.c to 973-cpmac_handle_mvswitch.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24141 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 12:18:36 +00:00