qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-26 09:26:48 +02:00
Code
10,504 Commits 13 Branches 0 Tags 117 MiB
7bd818a6e3
Commit Graph

24 Commits

Author SHA1 Message Date
nbd
7bd818a6e3 fix vlan mapping for cpu port on the marvell switch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-24 01:09:47 +00:00
nbd
f12451cca6 clear VLANTunnel bit on the marvell switch ports - should help with some bridging issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10931 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-23 16:28:05 +00:00
nbd
79f8984b04 Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ and the upcoming Fonera 2.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10876 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-20 08:29:01 +00:00
nbd
6598df69d1 Add stub driver for ADM6996F switches (configured through MII) 
The driver currently uses a hardcoded VLAN mapping and has no configuration yet
Tested on Accton MR3202a


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10869 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-20 02:53:04 +00:00
juhosg
3e6a0c14b4 [package] move spi_gpio driver into the kernel, clean-up SPI modules 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-15 07:33:43 +00:00
juhosg
33af3e23b0 [kernel] modules/gpio-buttons: fix build error on older kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10771 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-08 11:49:22 +00:00
mb
c19a584c44 ssb-mips: Fix IRQ routing on the MIPS core. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10770 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-08 09:15:53 +00:00
juhosg
c874812690 [kernel] add a polled GPIO buttons input driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10766 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-07 19:54:44 +00:00
mb
bad75cb0eb GPIODEV: Fix open-count race condition. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10625 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-03-19 11:32:08 +00:00
blogic
dc2f3c0139 add new led trigger for network traffic, fixes #2776 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10566 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-03-07 21:25:02 +00:00
mb
e6b6adc799 ssb: Update to latest upstream version of ssb. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10490 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-02-19 01:24:18 +00:00
mb
bdf17f190b b43: Make probing of NPHY devices possible. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10487 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-02-18 22:21:29 +00:00
nbd
00158ccffe "default-on" LED Trigger 
The current LED subsystem always initialises LEDs in the OFF state. This is fine for most LEDs but some should be on right from boot (e.g. POWER LED). Following some discussion with the LED subsystem maintainers, a trigger was recommended as the best way to implement this functionality.

Here is a patch to add a new trigger "default-on" which will initialise an LED in the ON state. It is not compiled by default.

Particular thanks to Rod Whitby for all his help with this.

Signed-off-by: Nick Forbes <nick.forbes@incepta.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10348 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-02-02 01:21:54 +00:00
blogic
ab09debb66 add userspace tool for gpio_dev 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10267 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-01-26 04:24:05 +00:00
blogic
01721535f2 remove binary file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10262 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-01-26 03:17:35 +00:00
blogic
57f5643ac3 add generic gpio char dev for CONFIG_GENERIC_GPIO archs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10261 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-01-26 03:16:11 +00:00
nbd
64f4da969a LED driver for PCEngines ALIX boards 
This patch adds a driver for the three LEDs that exists on the
PCEngines ALIX 2 and 3 series boards.

The driver is also added to the Alix profile.

Signed-off-by: Petr Liebman <petrliebman@gmail.com>

--


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9748 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-12-14 00:52:15 +00:00
florian
95b3525348 Forgot removing that file while applying patch from #2757 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9690 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-12-09 17:52:27 +00:00
juhosg
34047fa1ae make morse LED trigger available as a package, and fix it to compile with 2.6.23 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9363 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-10-20 14:32:13 +00:00
nbd
532249b507 sync ssb with upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9302 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-10-14 02:47:36 +00:00
nbd
50288c1764 back out change to generic-2.6/files/ and update 310-ssb_pcicore_fixes.patch for 2.6.23 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9281 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-10-13 02:21:24 +00:00
nbd
769ee01960 add patches for 2.6.23 on brcm47xx (not enabled yet) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9279 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-10-13 02:04:37 +00:00
juhosg
b7a77f6732 add missing file from [9055] 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9056 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-28 20:08:55 +00:00
noz
5939035634 Move SSB out of brcm47xx target into generic-2.6 target 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-07-01 22:44:05 +00:00