juhosg
56f15bb5f9
swconfig: Add cpu port index to help output.
...
Let swconfig provide the cpu port index in its help page. This is
needed as e.g. Atheros switches have their cpu port at port 0, not
port 5.
This could allow e.g. luci to get a rough overview of the layout of
the switch.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16 19:32:40 +00:00
juhosg
a5af4ae7d5
kernel: add driver for the RTL8366RB switch
...
Thanks to Andrew Tarabaras.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24 13:39:02 +00:00
juhosg
d7d76ebff9
rtl8366: make it available on all platforms
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25 15:13:38 +00:00
juhosg
1fc2b717c5
kernel: change debounce logic in the gpio-buttons driver
...
* thanks to Nuno Gonçalves
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-13 10:18:24 +00:00
nbd
f2e8193802
deduplicate kernel source files from 2.6.30-2.6.32 by moving them to generic files/
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18927 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-25 10:34:21 +00:00
nbd
b645d7df22
swconfig: add a generic switch reset call
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-28 19:16:17 +00:00
nbd
52196955df
swconfig: add a generic method for setting the port primary vlan id (used for transparently fixing up pvid for untagged port when setting vlan ports)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 21:26:39 +00:00
nbd
3a49788081
swconfig: treat struct switch_attr as constant
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 18:57:36 +00:00
nbd
346f19f3f1
move linux/switch.h to generic files/ instead of the kernel version specific directories
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-15 13:04:15 +00:00
juhosg
040727ff39
[kernel] add NP25G and WP543 board id
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-22 19:40:11 +00:00
juhosg
939db4d35a
[ar71xx] move MyLoader stuff into generic files, will be used on adm5120
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-17 09:19:27 +00:00
nbd
79670e1e13
change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-18 21:43:30 +00:00
juhosg
3e6a0c14b4
[package] move spi_gpio driver into the kernel, clean-up SPI modules
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-15 07:33:43 +00:00
juhosg
c874812690
[kernel] add a polled GPIO buttons input driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-07 19:54:44 +00:00
mb
e6b6adc799
ssb: Update to latest upstream version of ssb.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 01:24:18 +00:00
blogic
adeafa7cfb
add missing header file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26 03:52:11 +00:00
nbd
532249b507
sync ssb with upstream
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-14 02:47:36 +00:00
noz
5939035634
Move SSB out of brcm47xx target into generic-2.6 target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-01 22:44:05 +00:00
