1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-23 07:42:59 +02:00
Commit Graph

24593 Commits

Author SHA1 Message Date
jogo
878544bb07 bcm63xx: build images for DSL-274XB revision F1
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:51 +00:00
jogo
092e90e1ef bcm63xx: add ath9k to atheros wifi profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:48 +00:00
jogo
f095146c5d bcm63xx: enable bcm6328 support and required drivers
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:46 +00:00
jogo
cbdf1f350a bcm63xx: add support for DSL-274XB rev F1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:43 +00:00
jogo
5a482fc8b3 bcm63xx: fix port state after network down
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:40 +00:00
jogo
0bdb7cbf98 bcm63xx: add a fixup for ath9k devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:37 +00:00
jogo
d1683ec919 bcm63xx: add support for the HSSPI controller
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:33 +00:00
jogo
35f8e31243 bcm63xx: add preliminary support for bcm6328
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:29 +00:00
jogo
c9204063aa bcm63xx: add flash type detection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:25 +00:00
jogo
fdbaed3349 bcm63xx: pad Speedport W303 V images to 4 MiB
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:22 +00:00
jogo
df4c6091e6 tools: imagetag: add parameter for padding images
Allow images to be padded to a certain size. This prevents CFE from
flashing them to the second image offset.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:19 +00:00
jogo
34f9a0d745 bcm63xx: add a default switch configuration for DSL-274XB
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:17 +00:00
jogo
3df0e1587c bcm63xx: setup network config through uci-defaults
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:14 +00:00
jogo
acbbcb35b8 bcm63xx: move the board name workaround to /lib/brcm63xx.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:11 +00:00
jogo
2c54f4168e bcm63xx: use the exact board id as board identification string
No need to keep the bcm63xx/ at the start or the chipid info at the end.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:08 +00:00
nbd
209413c2fa kernel: remove a few more obsolete CompareKernelPatchVer calls, add dependencies on @TARGET_x86 for a few network drivers that are typically not found in non-PC equipment
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 12:33:55 +00:00
nbd
d99899b1fc netifd: fix "Command failed: Not found" error with dhcp
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-26 20:36:49 +00:00
nbd
00d5b5d73f mac80211: backport a fix for single-queue drivers (fixes #11534)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-26 20:15:28 +00:00
nbd
a8789daec2 ncurses: libncursesw should not depend on libncurses
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-26 18:03:56 +00:00
nbd
488a50c307 ppp: add back ip-{up,down}.d support for now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-26 15:31:54 +00:00
nbd
04288d031e mac80211: get rid of duplicate iw reg set command (thx, stintel)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31859 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-26 14:56:04 +00:00
nbd
05358e5920 netifd: update to latest version, fixes an endian issue in broadcast address handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31858 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-25 07:59:29 +00:00
nbd
b0a9996a85 netifd: update to latest version, fixes overriding the mac address for bridge interfaces (#11526)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31857 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24 18:45:01 +00:00
nbd
2ab926c84b kernel: fix a warning in the connmark module
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24 18:25:08 +00:00
nbd
8a303aee1e netifd: bring up wifi at boot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24 16:24:55 +00:00
jow
e459120874 [package] util-linux: compile with -fPIC, some users of its libuuid.a require it, e.g. cryptsetup (#11508)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24 09:17:27 +00:00
nbd
d642943131 base-files: kill ubusd and udhcpc on sysupgrade as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:54:12 +00:00
nbd
e2590c8421 base-files: allow sysupgrade to kill netifd, fixes pppd shutdown on upgrade
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:49:31 +00:00
nbd
95718ecbd7 netifd: improve /sbin/ifup wifi hack, make it work properly with -a. fold /etc/init.d/netifd into /etc/init.d/network
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:49:28 +00:00
jow
e771e71e91 [package] netifd: port r27720 (#9763) to the netifd ifup variant
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:26:20 +00:00
juhosg
530802ba69 kernel: update linux 3.3 to 3.3.7
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:32 +00:00
juhosg
71526f8705 ar71xx: fix an insignificant typo
Patch from #11485.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:30 +00:00
juhosg
e9ac406967 ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
Patch by Kamil Trzciński <ayufan@osk-net.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:25 +00:00
juhosg
e61440d8bd ar71xx: add support for TP-Link TL-MR3040
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:24 +00:00
juhosg
4a1bbe457a ramips: Add byte queue limits support to net/ethernet/ramips_main.c
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:23 +00:00
juhosg
7d9b449118 ramips: Enable sysupgrade for Sitecom WL-351
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:22 +00:00
juhosg
5dbbd23291 package/base-files: copy /lib/functions.sh to the ramfs on sysupgrade
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:20 +00:00
juhosg
8a8504629a linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver
Should fix #11513. Tested with the x86/generic squashfs image within a VM.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:19 +00:00
nbd
d1d40b4296 netifd: update to latest version, adds interface alias support (#11518), and fixes network route drops on dhcp renew
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 20:38:45 +00:00
nbd
fb17c4e710 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20 21:58:03 +00:00
nbd
31fe90a64a kernel: fix kmod-sched-core build for kernels without codel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20 21:57:58 +00:00
nbd
b2b71070d0 pppd: add noipdefault option to /etc/ppp/options (fixes #11499)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20 14:02:05 +00:00
nbd
106ac34f8f netifd: update to latest version, fixes dns server issues (#11501)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20 13:56:25 +00:00
nbd
b35e925be7 netifd: update to latest version, fixes peerdns handling, custom dns override and interface metric settings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19 23:47:33 +00:00
jow
0713bcf0c9 [package] kernel: fix packaging of act_connmark.ko (#11492)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19 23:33:47 +00:00
jow
2557831cbd [package] openssl: update to v1.0.1c (CVE-2012-2333)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19 21:00:14 +00:00
jow
edd13191a9 [package] dnsmasq: bump package revision
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19 20:17:57 +00:00
jow
323f8e06f6 dnsmasq: allow forcing options
The option 'force' when set to '1' will transform a dhcp-option to dhcp-option-force instead in the config.

This is useful for forcing options to be sent back to a client (even options it didn't ask for).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19 20:17:56 +00:00
jow
be8007e076 dnsmasq: add support for set: and tag: pairs
On my network, I have a variety of machines and appliances, some of which need different configuration issues than the default options.

For example:

config host
	option name 'client'
	option mac '00:01:02:03:04:05'
	option ip '192.168.1.20'
	option tag 'acme'

config tag acme
	option force '1'
	list dhcp_option 'option:router,192.168.1.253'
	list dhcp_option 'option:domain-name,acme.com'
	list dhcp_option 'option:domain-search,acme.com,redfish-solutions.com'

which allows me to override the default router for my client's host, as well as its domain-name, and its domain-search.

this causes the following config lines:

dhcp-host=00:01:02:03:04:05,set:acme,192.168.1.20,client
dhcp-option-force=tag:acme,option:router,192.168.1.253
dhcp-option-force=tag:acme,option:domain-name,acme.com
dhcp-option-force=tag:acme,option:domain-search:acme.com,redfish-solutions.com

This could be useful elsewhere, for instance, if you have an IP CCTV that you don't want to have a default-route, etc.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19 20:17:54 +00:00
jow
ba344a5eae [package] dnsmasq: fix parsing of mx record options (#11365)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-19 20:17:19 +00:00