CONFIG_X86_GENERIC obscures CONFIG_MGEODE_LX, etc. and causes it to use wrong cache-line size.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24071 3c298f89-4303-0410-b956-a3cf2f4a3e73
Fixes dependencies, and properly labels the module as GPL (thanks, Felix!).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23922 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since the net5501 doesn't have a VGA port, it doesn't need HID support either --
all console access will be over a serial port.
Also add FEATURES to it as well.
Signed-of-by: Philip Prindeville <philip@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23916 3c298f89-4303-0410-b956-a3cf2f4a3e73
Makes the builds run slightly faster on multicores.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23495 3c298f89-4303-0410-b956-a3cf2f4a3e73
This defines the Geos platform from Traverse Technologies in AUS.
This is a Geode LX800 with 512MB of DDR400 memory, 2 8139CP interfaces, 2 Solos ADSL2+ interfaces, USB, serial console, CF slot, and miniPCI slot.
I'll add support for the LEDs separately.
Signed-off-by: Philip A. Prindeville
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23390 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add a KVM guest subtarget to the x86 target. Since VirtIO is the
preferred I/O virtualization platform for kvm, this target expects it's
root device to be /dev/vda.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22944 3c298f89-4303-0410-b956-a3cf2f4a3e73
- use the host grub binary for grub install, but with target stage files
- disable SSP (-fno-stack-protector) & Compile Time Buffer Checks (-U_FORTIFY_SOURCE) if appropriate
- create a target grub package
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21305 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add a -combined suffix for grub+kernel+rootfs images and -rootfs for root filesystem only images
* change ext from .image to .img
* fix perms on VirtualBox .vdi image
* gzip ext2 rootfs image as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21246 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch brings up the net5501 platform.
Note that the x86/ target included support for all x86/ class
processors. That's not technically correct. This should be constrained
only to the "generic" subtarget. Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.
It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't. Again, moving
that to the generic subtarget.
Fortunately, this was a fairly benign tweak.
The net5501 board includes the following logic:
Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20794 3c298f89-4303-0410-b956-a3cf2f4a3e73
