5632 Commits

Author	SHA1	Message	Date
Xiangfu Liu	92167260ad	re-license the board-qi_lb60.c with GPLv2 or later	2009-11-18 10:23:56 +08:00
nico	569415276b	atheros: add fstype to combined image file name ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18443 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-17 21:53:50 +00:00
kaloz	e71fb302b1	change x86 image generation handling to treat only olpc specially ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18441 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-17 19:49:25 +00:00
kaloz	1c6be5e8b9	refresh 2.6.32 patches with -rc7 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18440 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-17 10:06:15 +00:00
kaloz	0dc48c489f	replace our arm LZMA loader with the one that goes upstream ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18439 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-17 10:04:41 +00:00
juhosg	aeb76a3ddf	ar71xx: setup platform data for ath9k on the TL-WR741ND, Bullet M and on the WNDR3700 boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18437 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-16 17:31:32 +00:00
juhosg	1e99bb12ff	ar71xx: register LEDs and buttons on the WNDR3700 ... Thanks to aorlinks (https://forum.openwrt.org/viewtopic.php?pid=97415#p97415) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18435 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-16 17:31:25 +00:00
juhosg	d71bee30b8	ar71xx: use __init for ar{71,91}xx_usb_setup ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18434 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-16 17:31:22 +00:00
Lars-Peter Clausen	733ee36727	jz4740: gpio: Emulate EDGE_BOTH irq type. ... The jz4740 only supports EDGE_RISING or EDGE_FALLING. Some drivers need EDGE_BOTH so we try to emulate it.	2009-11-16 01:34:50 +01:00
jow	1477f1e30e	[brcm-2.4] add migration code to automatically convert old to new switch config on first boot, this will be removed at some point in the future ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18432 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-15 23:19:39 +00:00
jow	b74589690e	[brcm-2.4] change switch config to swconfig style format to remain consistent accross platforms ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18425 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-15 18:43:46 +00:00
florian	71a22dbb1b	[rdc] fix image create after the conversion to subtargets ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18424 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-15 13:10:44 +00:00
Lars-Peter Clausen	2982c214f6	Add ubifs support.	2009-11-14 20:27:04 +01:00
nbd	db196bcbf9	Add a target (CONFIG_MAKE_CONFIG) that creates an exportable toolchain. The toolchain will zipped and saved under $(TOPDIR)/bin directory. ... Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18419 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-14 17:51:32 +00:00
nbd	5a76cd437c	make fpu emulation support configurable through kernel_menuconfig by adding a prompt for it ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18414 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-13 22:54:31 +00:00
hauke	3fb97947af	[brcm47xx] fix problem with 128MB ram. ... This patch is out of broadcoms official source code git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18413 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-13 20:32:47 +00:00
juhosg	dbba973c9f	ar71xx: add preliminary support for the Netgear WNDR3700 ... Based on patches by Marco Porsch from: https://forum.openwrt.org/viewtopic.php?id=22311 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18411 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-13 17:11:29 +00:00
juhosg	21c70e437b	ar71xx: add profile for the TL-WR841ND v5 board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18409 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-13 17:11:17 +00:00
Lars-Peter Clausen	31ee690d0a	u-boot: Disable adc and usb host clock at boot ... Adc clock will be enabled when it's needed and we don't use usbhost.	2009-11-12 01:40:11 +01:00
kaloz	0452e1aa54	[2.6.30] export __cpuc_flush_dcache_page for ARM targets ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18375 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-11 14:41:30 +00:00
kaloz	8307a88597	powerpc: use the in-kernel dtc compiler ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18374 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-11 13:44:12 +00:00
kaloz	bda513685e	some more Kconfig symbol move.. ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18371 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-11 11:52:41 +00:00
kaloz	5ed0363af9	another round of kernel config cleanups ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18370 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-11 11:42:24 +00:00
kaloz	7d2dbfd771	we don't support the 2.6.27 kernels for a long time now ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18369 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-11 11:38:02 +00:00
kaloz	321cdf5b29	move CPUFREQ to generic configs ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18368 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-11 10:00:28 +00:00
kaloz	4388c9e2c1	sort all target config files ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18367 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-11 09:27:13 +00:00
kaloz	470ce7bd90	move CONFIG_CRASH_DUMP to the generic configs ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18366 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-11 09:07:22 +00:00
florian	be57a0a21b	[rdc] cleanup subtarget kernel configurations to contain only what is ... required git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18359 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-10 23:10:07 +00:00
florian	860aac31e7	[rdc] convert profiles to become subtargets, compile tested only ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18354 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-10 00:22:07 +00:00
Lars-Peter Clausen	0d3b54ed10	gpm940b0: Add suspend/resume support.	2009-11-09 19:32:20 +01:00
Lars-Peter Clausen	92e06e95a5	jz4740: qi_lb60: Allow the power button to wakeup the device from suspend.	2009-11-09 17:56:21 +01:00
Lars-Peter Clausen	213a66582d	xburst: Enable gpio buttons driver in config. ... This is required to make the power button work.	2009-11-09 17:55:22 +01:00
Lars-Peter Clausen	1dd40a2e65	xburst: Enable suspend in config	2009-11-09 17:53:35 +01:00
Lars-Peter Clausen	27ca1adf36	jz4740: Cleanup powermanagemnt code. Add inital suspend support.	2009-11-09 17:47:28 +01:00
kaloz	8179e8082c	add preliminary MPC83xx support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18353 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-09 11:45:04 +00:00
nbd	8b71343ecd	backport a recent version of vsprintf to linux 2.6.28 to fix mac80211 wifi interface detection ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18352 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-09 00:58:44 +00:00
Lars-Peter Clausen	12f85f8a91	jz4740: Don't enable all clocks when booting. ... All clocks we need should allready be enabled by the bootloader.	2009-11-09 01:10:31 +01:00
Lars-Peter Clausen	c9cb830945	u-boot: Disable clocks we don't need ... We might gain a few more minutes battery runtime by this.	2009-11-09 00:44:26 +01:00
Lars-Peter Clausen	bc0684a065	jz4740: Remove imem and ipu support from proc ... It's not used and wastes 4MB of mem.	2009-11-09 00:25:34 +01:00
florian	4cf0969674	[rdc] remove empty wl153 profile after r18349 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18350 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-08 23:01:29 +00:00
florian	5a632e0fb1	[rdc] also support pcmcia ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18349 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-08 22:55:44 +00:00
florian	bda4e4e698	[rdc] move headers to arch/x86/include/asm/, patch from sn9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18347 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-08 22:49:28 +00:00
Lars-Peter Clausen	928b8ba548	jz4740: Remove mmc file from proc section ... It does not make sense to keep it threre.	2009-11-08 23:48:53 +01:00
florian	010506fafc	[rdc] make sure rdc321x specific patches apply (CONFIG_X86_RDC321X), patch from sn9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18346 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-08 22:48:19 +00:00
Lars-Peter Clausen	207ee3b6f5	u-boot: Don't initalize i2c and ssi gpio pins. ... We use neither.	2009-11-08 23:00:32 +01:00
hauke	c8e4b6534a	[amazon] Add some build fixes for kernel 2.6.21 and the infineon amazon target. ... Now it compiles with the new toolchain. These are mostly backports from mainline linux and newer linux kernels from openwrt. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18345 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-08 21:56:59 +00:00
florian	1fa447544a	[x86] add again missing hunk in vmlinux.lds.S ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18337 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 13:36:32 +00:00
florian	d076b12052	[x86] add missing hunk in the block2mtd patch ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18336 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 13:03:10 +00:00
florian	4a5b5bdb00	[brcm63xx] merge upstream fixes on mdio loop ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18335 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 12:48:17 +00:00
florian	a8a51aaf29	[kernel] refresh 2.6.31 patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18334 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 12:45:41 +00:00
florian	90c331955e	[x86] add olpc 2.6.31 configuration, forward port the block2mtd patch, refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18333 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 12:32:25 +00:00
florian	bbd135050c	[x86] the olpc config that was merged from the olpc port is a 2.6.30 config ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18332 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 12:16:31 +00:00
florian	6832337740	[rdc] provide the correct flash mapping on non airlink devices, remove the rootfs_type hacks, patch from sn9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18327 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-06 10:53:15 +00:00
florian	80bb9da84f	[rdc] add the prereq-check on lzma ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18326 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-06 08:47:28 +00:00
florian	91681580d6	[rdc] use host-side lzma decompression tool, lzma-4.32 from openwrt produces non-working bzImages, switch to 2.6.30, strip down kernel configuration ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18325 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-06 08:42:41 +00:00
florian	30d1329e80	[rdc] strip down even more the kernel configuration ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18324 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-05 23:40:12 +00:00
nbd	b9eaff23ad	remove the old alix led junk which was replaced by upstream code ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18320 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-05 16:16:32 +00:00
florian	1f00501340	[rdc] remove some other useless configuration items ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18314 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-05 13:21:55 +00:00
nbd	7954e8f37c	enable multicast routing for linux 2.4 (#6037) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18312 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-05 12:10:17 +00:00
florian	e0ac739a84	[rdc] remove useless configuration options ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18303 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-04 23:07:56 +00:00
agb	f11fdcc214	[rdc] 2.6.28: add flashmap and image support for the sitecom wl-176. Thanks Daniel Gimpelevich ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18300 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-04 22:44:02 +00:00
florian	9eea540afb	[rdc] include kmod-rdc321x-wdt by default ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18299 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-04 22:43:34 +00:00
florian	82ab0c04a1	[rdc] make rdc321-wdt become a package, saves some space in the kernel ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18298 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-04 22:43:05 +00:00
florian	4592820242	[kernel] add missing ledtrig-netdev dependency on the networking stack ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18297 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-04 22:21:13 +00:00
florian	47ef97e2e3	[brcm63xx] images without tagid now fallback to the untouched partition layout (#6093) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18288 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 19:59:04 +00:00
kaloz	fdd46a4e02	temporary remove the pfifo fast patch from 2.6.32, too ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18284 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 11:12:17 +00:00
kaloz	5f33b429e2	add preliminary 2.6.32 support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18283 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 10:49:27 +00:00
florian	ea913739e9	[kernel] add more missing configuration symbols ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18282 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 01:24:44 +00:00
florian	78015b1b6d	[x86] refresh kernel patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18281 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 01:12:48 +00:00
florian	b8f6c2dc9e	[x86] use 2.6.31.5, left-over from r18279 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18280 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 01:12:20 +00:00
florian	ea8823c993	[x86] merge the olpc target with the x86 target, both tested and running ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18279 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 01:02:39 +00:00
florian	f6a11cc553	[olpc] increase the rootdelay value to ensure usb enumeration completes before block2mtd uses /dev/sdX ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18278 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 23:40:12 +00:00
florian	be9a42ea65	[rdc] add cpu identification patch from bifferos ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18277 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 23:10:14 +00:00
florian	550454d4b6	[rdc] forward port r18254 to 2.6.30 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18276 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 23:07:47 +00:00
florian	fd6919ffec	[kernel] refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18275 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 23:05:47 +00:00
florian	b2f236b82b	[adm5120] fix compilation failure of adm5120-dbg.c with the removal of bus_id ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18274 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 15:55:16 +00:00
kaloz	4c1bc63b76	resync 2.6.30/2.6.31 patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18270 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 09:54:06 +00:00
kaloz	7e8dd669c9	Switch to the squashfs-lzma code from the squashfs-devel git tree. ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18267 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 09:51:35 +00:00
nbd	17747ab1ac	ixp4xx: fix weird ethernet issues with some devices caused by the ethernet packet size increase. ... despite what the docs day, 14320 is the largest working MRU value, not 16320 fixes #5785 for me git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18262 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 00:44:01 +00:00
blogic	d30299b51e	[ifxmips] adds dsl support, thank you infineon/lantiq ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18259 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-01 18:52:35 +00:00
agb	76e192d94c	[rdc] 2.6.28: remove zero-byte patch left by last commit ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18255 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-01 06:24:34 +00:00
agb	cbd083f77e	[rdc] 2.6.28: add ZyXEL and Amit flashmapping and start fixing up GPIO support. Thanks Daniel Gimpelevich ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18254 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-01 05:34:46 +00:00
agb	100ec06353	[brcm-2.4] fix failsafe, was accidentally broken by r18214. Thanks Daniel Gimpelevich ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18253 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-01 01:09:56 +00:00
juhosg	f622ac94c8	ixp4xx: the missing phy_disconnect call has been added in upstream, remove that patch ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18252 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-31 20:10:34 +00:00
juhosg	2d033cdc39	ixp4xx: remove bogus 'eth%d: MII PHY x on NPE-x' messages ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18251 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-31 20:10:30 +00:00
florian	56311db0ca	[olpc] alway include kmod-libertas by default ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18245 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-31 12:29:14 +00:00
florian	15e0985ea5	[rdc] refresh 2.6.30 kernel patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18231 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 16:24:52 +00:00
florian	ddcb850f7b	[kernel] fix build failures on include/scsi/scsi.h, spotted by udev compilation ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18230 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 16:24:20 +00:00
juhosg	a1509a7028	ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18229 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 15:15:41 +00:00
juhosg	ad1488bf57	ar71xx: sync 2.6.31 kernel config ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18227 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:28 +00:00
juhosg	1d2b1e7279	ar71xx: add preliminary support for the TL-WR841ND v5 board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18226 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:25 +00:00
juhosg	0724c81c22	ar71xx: use soc specific divider for mdio clock ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18225 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:22 +00:00
juhosg	5be08769f3	ar71xx: update mdio_reset code ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18224 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:17 +00:00
juhosg	8b79390edb	ar71xx: add missing profiles for the TL-WR841ND v3 and MZK-W300NH boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18223 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:14 +00:00
juhosg	e75593217a	ar71xx: simplify image generation ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18222 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:10 +00:00
florian	877e45fb1d	[kernel] remove no longer used configs and patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18221 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 09:55:53 +00:00
blogic	7a9d219092	[ramips] missing header file changes, and fix mtu value ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18220 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 09:18:40 +00:00
Xiangfu Liu	1652213e92	[U-BOOT] fix init	2009-10-30 15:44:24 +08:00
Lars-Peter Clausen	44e92dbd5d	gpm940b0: Select high driver frequency ... Fixes flicker.	2009-10-30 02:18:31 +01:00
thepeople	163074a14b	fix my typo ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18219 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 01:08:11 +00:00
thepeople	09e306ce30	add WRT350Nv1 target, thanks sn9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18218 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 01:05:37 +00:00
florian	5e0a41a041	[olpc] make the kernel also output on ttyS0 and ask openfirmware to unfreeze the screen ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18216 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 23:35:54 +00:00
florian	30576ebab8	[olpc] ext2 images need to wait for /dev/sda2 to appear before attempting to mount it, fixes olpc boot on ext2 images ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18215 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 23:34:39 +00:00
blogic	70916d05de	make etehrent work on wrt350n, thx sn9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18214 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 21:26:36 +00:00
blogic	f46dbe37e1	[ramips] fixes rx path for eth, spinlock it, increases buffer size, board now survives ping -f ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18212 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 21:08:11 +00:00
florian	b08f29cbc9	[at91] fix u-boot installation ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18208 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 16:03:15 +00:00
florian	7ac41a58e0	[at91] fix u-boot linking failure with an EABI toolchain ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18207 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 16:00:37 +00:00
florian	6bc0d61369	[at91] fix dfboot linking failures (#5937) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18206 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 15:48:34 +00:00
florian	eb47209914	[brcm63xx] do not generate trx images, this is useless ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18204 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 13:39:29 +00:00
blogic	7616e48d77	[ramips] hopefully fixes dma issues seen on ethernet driver when under high load ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18203 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 12:51:45 +00:00
florian	24168b9159	[kernel] remove support for 2.6.27, no target is using it anymore ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18201 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 12:20:45 +00:00
florian	4a72ea39d6	[kernel] fix build failure on vmlinux.lds with 2.6.31 (#6052) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18199 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 10:55:52 +00:00
florian	6ae3b70899	[kernel] move the forward declaration of struct mtd_info, prevents build failures on arm and mips ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18198 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 10:43:14 +00:00
kaloz	f0bcf0323b	ppc40x: use version number-less patches and config ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18188 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-27 19:20:31 +00:00
kaloz	e0af8557d2	remove 2.6.28 support from ppc40x ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18187 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-27 19:19:07 +00:00
kaloz	9096e2fed8	disable ppc4xx watchdog, it's unreliable ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18186 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-27 19:18:02 +00:00
Xiangfu Liu	6293205a75	font SUN8x16 is better	2009-10-28 03:13:33 +08:00
Xiangfu Liu	d0e8e5dbfc	update u-boot patch ... Signed-off-by: Xiangfu Liu <xiangfu@qi-hardware.com>	2009-10-28 03:13:33 +08:00
JieJing.Zhang	907a34b80e	jz_battery: fix bug cause kernel panic. ... all about container_of macro. Signed-off-by: JieJing.Zhang <kzjeef@gmail.com>	2009-10-28 03:13:33 +08:00
Xiangfu Liu	110c87a5f7	revert commit: 3dbe390f5347b6c279c9d193445e1c86fbee9894 ... those change make kernel panic.	2009-10-28 03:13:33 +08:00
Xiangfu Liu	8319e34599	fix the jz4740_pcm_mmap function ... now Ben can play online Radio	2009-10-28 03:13:33 +08:00
Jiejing.Zhang	96b315a920	add disable sound amp while sound not playback. ... This will save power of amp. Signed-off-by: Jiejing.Zhang <kzjeef@gmail.com>	2009-10-28 03:13:33 +08:00
Xiangfu Liu	6aec1a06bf	change system name form OpenWrt to BenNanoNote	2009-10-28 03:13:32 +08:00
Xiangfu Liu	6abb40220e	fix the comma and period key	2009-10-28 03:13:32 +08:00
Xiangfu Liu	fa7ec6d7d6	enable the speaker	2009-10-28 03:13:32 +08:00
Xiangfu Liu	e64a14b4fd	enable the sound as default	2009-10-28 03:13:32 +08:00
Xiangfu Liu	3843e5f1af	upgrade u-boot to 2009.08	2009-10-28 03:13:32 +08:00
Lars-Peter Clausen	9eff41dbb1	qi_lb60: Initalize nand paritions and ecc layout depending on the chip size.	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	cc05485408	jz4740_nand: Add ident_callback ... Add ident_callback which is called after the nand chip has been identified and before it is setup. This can be used by board code to set partition and ecc info depending on the chip.	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	7fa87373a8	mach-jz4740: Move all non generic code from platform.c to board-qi_lb60.c ... platform.c should only contain the generic platform device definitons, everything board specific should go into the board file.	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	5709f560f9	Cleanup qi-lb60 board code.	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	9c229a412e	Remove old ingenic framebuffer drivers. ... I think it's time to get rid of these	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	c84ef25bf3	Merge patches into files.	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	c456866a4a	jz4740_fb: Properly initalize physical video memory address	2009-10-28 03:13:31 +08:00
Florian Fainelli	7df7bde3ac	refresh xburst patches	2009-10-28 03:13:30 +08:00
Xiangfu Liu	767987c14e	cleaup code style	2009-10-28 03:13:30 +08:00
Xiangfu Liu	d89fdafa97	update power button patch	2009-10-28 03:13:30 +08:00
Mirko Vogt	e818ccc989	use the linux kernel version 2.6.31 (final)	2009-10-28 03:13:30 +08:00
Xiangfu Liu	3dde1ac212	code style cleanup jz4740_nand.c	2009-10-28 03:13:30 +08:00
Xiangfu Liu	ce96b1f2a5	remove init WAKEUP in board-qi_lb60 file	2009-10-28 03:13:30 +08:00
Xiangfu Liu	4fc4138e68	add power button driver	2009-10-28 03:13:30 +08:00
Xiangfu Liu	2f3ac925c4	cleanup-gpm940b0-code-style.patch	2009-10-28 03:13:29 +08:00
Xiangfu Liu	1649bbc3d6	make poweroff command work	2009-10-28 03:13:29 +08:00
Xiangfu Liu	71e391515f	cleanup modifier keys driver	2009-10-28 03:13:29 +08:00
Mirko Vogt	a1ef81c12e	enable ext3 and (v)fat by default	2009-10-28 03:13:29 +08:00
Mirko Vogt	090ea365ad	disabled MMC debug output in default config	2009-10-28 03:13:29 +08:00
Mirko Vogt	204259721b	do not use default device type <router> as we do not need dnsmasq, ppp, iptables, etc. for now	2009-10-28 03:13:29 +08:00
Mirko Vogt	c2696d65ee	use rootwait instead of rootdelay as it is mor dynamic - however there's no delay needed anyway when booting from nand	2009-10-28 03:13:28 +08:00
Jiejing.Zhang	cd0d71a697	jz-battery: improve code. clear static var. ... 1. clear static global var, use platform_get_drvdata. 2. check gpio state before register power supply. Signed-off-by: Jiejing.Zhang <kzjeef@gmail.com>	2009-10-28 03:13:28 +08:00
Mirko Vogt	45c720faff	add base files for ... - assigning IP 192.168.1.1 per default to usb0-interface (usb-ethernet-gadget) - add mountpoint for 1st partrition of sd-card - prelimary for testing purposes	2009-10-28 03:13:28 +08:00