qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-29 08:49:53 +02:00
Code
21,705 Commits 13 Branches 0 Tags 117 MiB
95d3699b73
Commit Graph

8076 Commits

Author SHA1 Message Date
juhosg
95d3699b73 ar71xx: ag71xx: remove MII interface setup code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:56 +00:00
juhosg
13e0098939 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:54 +00:00
juhosg
4cc612872a ar71xx: fix occasional kernel hangs during boot on AR934x 
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29009 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:52 +00:00
juhosg
5fb5b4483b ar71xx: refresh kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29008 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:51 +00:00
jogo
85ec5ce98d linux: update 3.1 to 3.1.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29007 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 10:48:05 +00:00
blogic
e5c40dc4c3 lantiq: add uci-defaults code for handling leds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:21 +00:00
blogic
bddadbe32b lantiq: add /lib/lantiq.sh and make hotplug handlers use it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:16 +00:00
blogic
a8be2afd85 lantiq: rename leds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29002 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:12 +00:00
blogic
14ec28a2a3 lantiq: split compat headers out of bsp header patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29001 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:07 +00:00
blogic
98bf7b355b lantiq: adds hotplug handler for loading rt2x00 firmware 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29000 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:01 +00:00
blogic
1efd56db6c lantiq: adds hotplug handler for handling buttons and makes w303v work with it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28999 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:39:56 +00:00
blogic
4919aff42f lantiq: cleanup default package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28998 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:39:51 +00:00
blogic
2c1120a3b3 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28994 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 18:41:15 +00:00
juhosg
9394e4a065 kernel: ar8216: add support for the AR8236 switch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 14:09:52 +00:00
juhosg
63898b07cc kernel: ar8216: move port vlan setup into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28992 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 14:09:50 +00:00
juhosg
0999f2be56 ar71xx: use the button for WPS control on the DB120 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28990 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:20 +00:00
juhosg
69a4e7ba6a ar71xx: register the second ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28989 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:19 +00:00
juhosg
f42393b3c6 ar71xx: implement SoC specific phy interface setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28988 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:18 +00:00
juhosg
428566d3de ar71xx: move phy interface setup into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28987 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:16 +00:00
juhosg
9c2632e5aa ar71xx: register both MDIO bus on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28986 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:59 +00:00
juhosg
8255c166fd ar71xx: add AR934X specific MDIO registration code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28985 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:56 +00:00
juhosg
79bc01d085 ar71xx: add a secondary mdio bus 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28984 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:54 +00:00
juhosg
4e5c6e94da ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28983 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:50 +00:00
juhosg
f20b056795 ar71xx: add an id argument to ar71xx_add_device_mdio 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28982 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:48 +00:00
juhosg
7d1b33ecbd ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28981 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:42 +00:00
juhosg
1553f9eabd ar71xx: add AR934x specific USB setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28980 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:20 +00:00
juhosg
5f0b41bae5 ar71xx: register the first ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28979 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:18 +00:00
juhosg
8a3f26299d ar71xx: allow to register ethernet interfaces for AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28978 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:17 +00:00
juhosg
3cd36281d9 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28977 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:16 +00:00
juhosg
a1f5559837 ar71xx: add AR934X specific bootstrap and reset register bits 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28976 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:15 +00:00
juhosg
a3d2129487 ar71xx: add diag support for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:10 +00:00
juhosg
bb977eb73b ar71xx: fix GPIO direction setup for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28974 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:09 +00:00
juhosg
1d1240855a ar71xx: fix AR934X clock frequency calculation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28973 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:08 +00:00
juhosg
b780360c45 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28971 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:04 +00:00
blogic
409ee4a226 lantiq: improve falcon package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28962 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 21:59:11 +00:00
blogic
79a88f017c lantiq: fix breakage introduced in 3.1 bump 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28961 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 21:59:01 +00:00
jow
329ee765ee base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28933 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-10 12:16:41 +00:00
jogo
4ef5b94744 target: linux: mtd: fix MTDREFRESH to an arbitrary high number 
To make the ioctl number "stable", use an arbitrary high number to prevent
conflicts with new mtd ioctls that would push MTDREFRESH's number.

Also make mtd use the in-kernel mtd headers.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28893 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-09 21:16:36 +00:00
nbd
33f4cde7a9 ar71xx: remove dead code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:33:20 +00:00
nbd
4677737b0a ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:33:15 +00:00
nbd
d212a08b1c kernel: add a top level menuconfig option for enabling lockdep 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:32:57 +00:00
juhosg
e3ad4fdef0 ar71xx: create TL-WA901ND network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28833 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:24 +00:00
juhosg
53b106bac4 ar71xx: create ALL0258N network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28832 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:23 +00:00
juhosg
6827eb6991 ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28831 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:20 +00:00
juhosg
cec23da75a ar71xx: create WZR-HP-G300NH network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28830 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:17 +00:00
juhosg
78fd771952 ar71xx: create RB-493G network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28829 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:12 +00:00
juhosg
27b52397f9 ar71xx: create TL-WR1043ND network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28828 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:11 +00:00
juhosg
97783936b3 ar71xx: create WRT160NL network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28827 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:09 +00:00
juhosg
9a2f4e2196 ar71xx: create PB92 network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28826 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:08 +00:00
juhosg
55fb18f8e1 ar71xx: create DIR-825-B1 network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28825 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:07 +00:00