qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 01:01:52 +02:00
Code
25,209 Commits 13 Branches 0 Tags 117 MiB
96c6452cfc
Commit Graph

63 Commits

Author SHA1 Message Date
hauke
a485afe4d4 [packages] switch: warn if ndo_do_ioctl is not implemented in the Ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33506 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 12:29:23 +00:00
hauke
e8793f4a3f [package]: switch: improve error message 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33464 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 10:57:38 +00:00
hauke
b1de47f245 [packages] switch: clean up robo switch driver 
* remove use_et, all supported drivers are using mii ioctls
 * remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR.
 * remove support for old kernel versions
 * do_ioctl is allways called with buff == NULL
 * use if_mii


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33002 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-05 13:10:43 +00:00
hauke
1d6c42df96 brcm47xx: use libgpio instaed of implementing the gpio interface ourself. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32992 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-04 19:46:25 +00:00
jow
9bbe7731c6 [package] switch: the hardware must be up while configuring 
Since the removal of the interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup,
leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30937 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 21:15:41 +00:00
hauke
8bf9a785b1 switch: fix some memory leaks in switch_parse_vlan() 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29936 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-28 13:52:37 +00:00
hauke
7d9def4e2e switch: update for brcm47xx target 
* remove suport for 2.4 kernel
* add support for bcma bus



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27904 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 20:07:58 +00:00
florian
48578aa816 [package] switch: fix switch-robo device reference counting 
Fix incorrect device reference counting by switch-robo.

Signed-off-by: George Kashperko <george@znau.edu.ua>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25619 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-02-20 17:24:15 +00:00
florian
47cfa18482 [package] remove whitespaces in kmod-switch sources 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22320 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-20 22:25:04 +00:00
claudio
ae57d8838c massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22145 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-12 14:06:13 +00:00
nbd
fef81766d0 remove linux 2.4 support from several packages 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21954 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-06-26 20:43:41 +00:00
jow
3f5a33d21c [package] switch: explicitely clear port mappings in unsused vlans (#7082) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20717 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-05 13:51:26 +00:00
nico
0a7ebe9ab1 switch: suppress boot error message on 2.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-01 01:12:57 +00:00
jow
b48013b35b [package] switch: 
eliminate the asterisk from the switch port configuration and set it
	automatically on the first vlan, this aligns the broadcom vlan config
	with the swconfig format


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19909 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-28 16:40:06 +00:00
florian
82212c6f65 [package] switch: do not include linux/autoconf.h (#6513) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19903 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-28 12:57:57 +00:00
jow
b74589690e [brcm-2.4] change switch config to swconfig style format to remain consistent accross platforms 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18425 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-15 18:43:46 +00:00
florian
2fbb0f0be3 [package] fix breakage on wl500gp after r18214, thanks sn9 (#6084) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18289 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-03 20:35:37 +00:00
blogic
70916d05de make etehrent work on wrt350n, thx sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18214 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 21:26:36 +00:00
hauke
f4aa4e469c [brcm47xx] add patches for kernel 2.6.31 
This is completly untested. Only a compile tests with the default config was done!


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17734 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-09-26 11:48:48 +00:00
florian
cceb94e775 [package] fix oops in switch-robo on brcm63xx, thanks to Daniel Dickinson (#5053) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15611 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-05-05 06:32:45 +00:00
florian
b130fd7d9e [package] prevent kmod-switch from accessing nvram on brcm63xx (#5035) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-05-02 10:01:09 +00:00
florian
176570cee9 [package] fix nvram_get checking on non-WGT634U (#4975) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15319 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-21 09:25:51 +00:00
florian
97ad75a40a [package] fix strange LED behavior with Netgear WGT634U (#3552) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15290 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-20 10:27:46 +00:00
nbd
796a9d1091 get rid of $Id$ - it has never helped us and it has broken too many patches ;) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-17 14:09:46 +00:00
florian
9df07ac5e1 [package] allow kmod-switch to be used on brcm63xx (#4599) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14825 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-03-09 21:57:11 +00:00
nbd
7889abbd92 switch: remove message about BFL_ENETADM not being set on systems with a roboswitch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13100 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-11-02 23:14:16 +00:00
nbd
c848213af9 (4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered 
This patch prevents switch-robo.c from attempting robo_probe on a port
that is already registered.  robo_probe will adjust kernel reference counts
if it detects a switch on the port.  If this patch wasn't applied, the
wrt350n would hang on reboot, waiting for the network driver reference count
to reach zero indefinitely.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11469 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-15 11:10:27 +00:00
noz
73003484e2 [bcm47xx] Stopgap compilation fixes for diag and switch under 2.6.25 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11231 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-20 22:33:45 +00:00
noz
8570a82f7c Allow package/switch to compile against 2.6.25 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11138 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-14 15:03:05 +00:00
mb
aa3defff60 Check the return values of kmalloc() 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10599 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-03-13 15:22:46 +00:00
nbd
b3f2bc9aac fix switch-robo.c compile errors on linux 2.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-03-01 15:34:17 +00:00
mb
3814202702 Fix the roboswitch code for the WRT350N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-02-27 22:35:41 +00:00
mb
84296b55ed ssb: Make the GPIO API reentrancy safe. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10496 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-02-19 15:22:17 +00:00
nbd
9cd1d90624 export switch-core.h to $(STAGING_DIR) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10138 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-01-06 19:28:26 +00:00
nbd
173083fcbf fix adm switch misdetection, which led to bogus button events that caused the system to shut down 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-11-16 03:11:09 +00:00
nbd
6db7ad74f6 major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-08 19:55:42 +00:00
nico
d275f1aba0 fix board name for nvram and switch packages on brcm-2.4 after [8653] 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8664 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-07 12:54:24 +00:00
nico
c4b73fa154 move package description to a separate definition, remove it when DESCRIPTION=TITLE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8659 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-07 08:34:51 +00:00
nbd
17c7b6c3fd strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-06 16:27:37 +00:00
nico
76c7aa6ffa package Makefile cleanup: remove uneeded vars 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8587 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-03 08:20:36 +00:00
nico
a702c26fde use a default VERSION field for kmod packages 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8575 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-02 16:39:27 +00:00
nbd
e7448c7a3c fix kmod-switch compile on brcm-2.4 (#1461) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6565 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-14 13:42:21 +00:00
nbd
513c273d00 fix up remaining parts for the brcm47xx-2.6 port (tested on wgt634u), nuke the old brcm-2.6 port, close #1312, #1451 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-14 03:37:40 +00:00
nbd
c7a59f885d add diag and switch support for brcm47xx-2.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-14 01:19:24 +00:00
nbd
17126ba85f cleanup, nuke obsolete 'Kernel drivers' category, convert remaining kmod packages to KernelPackage interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6136 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-20 02:01:53 +00:00
nbd
29e8bb3130 fix memory leak in switch drivers (patch from #1132) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6011 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-07 14:59:43 +00:00
florian
e1bdcce850 Fix the counters bug (#983) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5910 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-12-27 19:35:13 +00:00
nbd
394615dd78 prepare packages for kernel upgrade to 2.6.19 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5786 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-12-14 08:00:20 +00:00
florian
d313d6dbc3 Add Trendware TEW-411BRplus (#1038) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5764 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-12-11 21:46:31 +00:00
nbd
a4a6443af1 replace lots of manual install commands with INSTALL_* variables 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-23 00:29:07 +00:00