florian
|
e43c771244
|
[brcm63xx] fix GEN_SPI_RSET_BASE macro (#9697)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27604 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-13 09:33:11 +00:00 |
|
kaloz
|
7c0785c307
|
[generic]: upgrade to 3.0-rc7
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27600 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-12 13:44:16 +00:00 |
|
kaloz
|
dc2c30ab96
|
[orion]: upgrade to 3.0-rc6 and optimize for armv5te again
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27592 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-11 20:35:16 +00:00 |
|
nbd
|
ec8e57edd9
|
ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27568 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-09 06:30:13 +00:00 |
|
nbd
|
cc32100390
|
ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27567 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-09 06:29:46 +00:00 |
|
kaloz
|
959037c889
|
[cns3xxx/3.0]: use the new upstream l2cache and wdt code, smaller changes, refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27558 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-08 09:41:07 +00:00 |
|
kaloz
|
53512ff331
|
[generic/3.0]: add mpcore_wdt fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27557 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-08 09:33:13 +00:00 |
|
blogic
|
3bc6f3a20f
|
fix generation of falcon images for profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27550 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 20:20:51 +00:00 |
|
blogic
|
50f83cd332
|
adds 2 ASC related patches to lantiq
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27549 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 20:20:46 +00:00 |
|
blogic
|
76628e7f3f
|
fix up falcon kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27542 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 18:20:56 +00:00 |
|
blogic
|
096b823d77
|
fix i2c-falcon kmod package selection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27541 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 18:20:51 +00:00 |
|
blogic
|
43ab5eea8e
|
replace all references to xway with danube
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27538 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 18:20:37 +00:00 |
|
blogic
|
d8b94e0eba
|
fix lantiq image makefile to represent new split between ar9 and danube
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27537 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 18:20:31 +00:00 |
|
blogic
|
f79f43253c
|
add ar9 specific profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27536 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 18:20:27 +00:00 |
|
blogic
|
e59bcdde3e
|
rename xway profile to danube and remove ar9 specifics
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27535 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 18:20:21 +00:00 |
|
blogic
|
4130b70d43
|
remove ar9 board from xway profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27534 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 18:20:16 +00:00 |
|
blogic
|
c8b7636f71
|
remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27532 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 18:20:07 +00:00 |
|
kaloz
|
145f06f8eb
|
[cns3xxx]: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27528 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 17:18:50 +00:00 |
|
kaloz
|
72a7b90977
|
[cns3xxx]: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27527 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 17:18:06 +00:00 |
|
kaloz
|
03d352a4dc
|
[cns3xxx]: enable smp support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27526 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 17:17:44 +00:00 |
|
kaloz
|
f03e9c5d7f
|
[cns3xxx]: make smp code more similar to upstream
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27525 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 17:17:06 +00:00 |
|
kaloz
|
af0b474c6e
|
[generic/3.0]: 3.0 is at rc6 now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27524 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 13:30:41 +00:00 |
|
juhosg
|
d3310ebab9
|
ar71xx: build image for the AP121 boards with 4M of flash
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27523 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 13:01:50 +00:00 |
|
juhosg
|
142740d87d
|
ar71xx: add separate profiles for the AP121 and AP121-MINI boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27522 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 13:01:48 +00:00 |
|
kaloz
|
a720db70de
|
[generic/3.0]: add support for and switch to XZ compressed kernels on ARM
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27518 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 10:26:16 +00:00 |
|
kaloz
|
516de0469b
|
[cns3xxx]: select the right cpu
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27517 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 10:24:37 +00:00 |
|
florian
|
10f78687ab
|
[kernel] fix building of perf for arm on uclibc
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27514 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 09:43:00 +00:00 |
|
florian
|
8d18817441
|
[realview] enable support for perf events
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27512 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 09:42:53 +00:00 |
|
florian
|
c832b9012a
|
[malta] enable perf counter support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27511 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 09:42:50 +00:00 |
|
cshore
|
59e4e4f311
|
[ar7] base-files: diag.sh: added failsafe led definition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27502 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-07 03:09:20 +00:00 |
|
blogic
|
a408b75fba
|
[lantiq] get ready for 3.0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27496 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 17:27:17 +00:00 |
|
juhosg
|
90433b3461
|
ramips: fix buffalo image generation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27495 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 16:46:33 +00:00 |
|
kaloz
|
4d759b723b
|
[ixp4xx]: add 3.0 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27493 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 13:03:38 +00:00 |
|
kaloz
|
882adee49e
|
refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27492 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 12:57:51 +00:00 |
|
kaloz
|
23fde26a5c
|
[generic]: fixup mtd refresh and co.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27491 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 12:55:21 +00:00 |
|
kaloz
|
146c7d6f10
|
[generic/3.0]: fix myloader patch, thanks KanjiMonster
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27490 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 12:48:17 +00:00 |
|
blogic
|
bf7b45f818
|
fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27489 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 10:36:56 +00:00 |
|
kaloz
|
299fdf65d5
|
[cns3xxx]: we have an up-to-date mach-type file now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27486 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 10:12:50 +00:00 |
|
kaloz
|
b936a9b656
|
[generic/3.0]: replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27485 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 10:09:15 +00:00 |
|
florian
|
d8a46ca40e
|
[brcm63xx] move board_HW553 inside the ifdef ..BCM6358 .. endif block
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27484 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 10:00:39 +00:00 |
|
florian
|
f98de2585b
|
[kernel] refresh 2.6.39 geode patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27483 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 10:00:05 +00:00 |
|
juhosg
|
b016341cf1
|
ramips: add diag support for RT-N15 and PWH2004
Also sort the board names alphabetically.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27478 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 08:05:00 +00:00 |
|
juhosg
|
6451badb13
|
ramips: use the 'router' LED for diagnostic on the WHR-G300N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27477 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 08:04:55 +00:00 |
|
juhosg
|
eaafa6fa91
|
ramips: create tftp image for the WHR-G300N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27476 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 08:04:54 +00:00 |
|
juhosg
|
c96ab0c002
|
ramips: create factory image for the WHR-G300N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27474 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 08:04:52 +00:00 |
|
cshore
|
da0ae64a3e
|
[brcm63xx] Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27471 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 06:35:24 +00:00 |
|
cshore
|
e6ee47fd40
|
[brcm63xx] profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27470 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 06:35:22 +00:00 |
|
kaloz
|
b3f665b919
|
[generic/3.0]: add some symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27464 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-05 21:19:57 +00:00 |
|
florian
|
bc9fd85f57
|
[kernel] sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27457 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-05 12:40:50 +00:00 |
|
kaloz
|
458e5861cd
|
[target/generic/3.0]: add missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27454 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-05 11:55:31 +00:00 |
|