qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-27 14:31:44 +02:00
Code
17,086 Commits 13 Branches 0 Tags 117 MiB
a219ae9c95
Commit Graph

29 Commits

Author SHA1 Message Date
jow
cd5afd54ab [backfire] merge r20846 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@20847 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-13 22:35:20 +00:00
jow
11ae578a49 [backfire] merge r20775 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@20776 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-10 14:31:27 +00:00
jow
70c479891f [brcm-2.4] remove asterisk from default vlan ports in netconfig 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19910 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-28 16:44:40 +00:00
jow
b48013b35b [package] switch: 
eliminate the asterisk from the switch port configuration and set it
	automatically on the first vlan, this aligns the broadcom vlan config
	with the swconfig format


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19909 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-28 16:40:06 +00:00
thepeople
d60b20b806 add support for the MN-700 platform, closes #2575 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19863 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-26 01:34:39 +00:00
nbd
a9929695c6 add preinit modularization work by Daniel Dickinson (cshore) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19331 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-25 17:11:17 +00:00
jow
c3794557a9 [brcm-2.4] add support for OvisLink WL-1600GL 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19262 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-21 23:48:23 +00:00
nbd
035f5fa612 add WRT300N v1.1 support (patch from #6379) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18921 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-24 10:58:09 +00:00
jow
8ea05ffd2b [brcm-2.4] fix typo in switch config migration script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18657 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-05 12:39:28 +00:00
jow
1477f1e30e [brcm-2.4] add migration code to automatically convert old to new switch config on first boot, this will be removed at some point in the future 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18432 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-15 23:19:39 +00:00
jow
b74589690e [brcm-2.4] change switch config to swconfig style format to remain consistent accross platforms 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18425 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-15 18:43:46 +00:00
agb
100ec06353 [brcm-2.4] fix failsafe, was accidentally broken by r18214. Thanks Daniel Gimpelevich 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18253 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-01 01:09:56 +00:00
blogic
70916d05de make etehrent work on wrt350n, thx sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18214 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 21:26:36 +00:00
nbd
220c2d388d Fix Buffalo WBR-G54 and WBR-B11 support (updated patch) 
Signed-off-by: Roger Hardiman <roger@rjh.org.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17598 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-09-16 18:14:29 +00:00
nbd
fcd35cb061 rename our /bin/login script to /bin/login.sh to avoid collisions with busybox - we always use -l on telnetd anyway 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15097 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-04 09:35:55 +00:00
nbd
03c1e266f1 Asus WL-330gE Support 
Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.

Signed-off-by: David Cooper <dave@kupesoft.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-02-22 18:45:39 +00:00
juhosg
2307fc302d [brcm-2.4] fix Dell TrueMobile 2300 v1/v2 detection and network configuration (closes #2788) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11935 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-07-26 16:10:44 +00:00
nbd
f833889761 (3/6) bcm57xx: preinit 
This patch allows the bcm57xx module to work correctly with failsafe mode.

insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately.  This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.

The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11468 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-15 11:10:13 +00:00
nbd
8d0837caa2 (2/6) bcm57xx: netconfig 
Update the netconfig script to support boardtype 0x478.  I've tested this
on the wrt350n, hopefully it will match the 600n as well.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11467 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-15 11:09:49 +00:00
thepeople
8c98e14900 This patch lets netconfig support the asus wl-500w. Signed-off-by: Ben Pfountz <netprince@vt.edu> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11070 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-08 01:30:14 +00:00
agb
9325eaaa8c Add support for the WL-500gP v2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10693 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-03-31 08:04:56 +00:00
florian
209f76b1df Add back Sitecom WL-105b support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-01-08 14:27:48 +00:00
juhosg
7aa11efc17 get rid of per-profile base-files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9069 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-29 14:27:54 +00:00
pavlov
f5ab57b335 commit profile support for base-files... patches still need to be done 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6465 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-03-02 18:17:40 +00:00
nbd
fca1e28839 Add WL-700gE support (based on work by jr) 
Includes kernel/diag patch and a new target profile


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-20 12:35:00 +00:00
nbd
45e49953d0 don't exit from failsafe mode after the console shell quits (some devices don't have /dev/console) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6020 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-07 17:38:29 +00:00
nbd
7ac291d1fc add a netconfig override for the wl-500g (fixes #1116) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6016 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-01-07 15:41:47 +00:00
nbd
6933f718b4 better network config support for bcm94704 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5775 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-12-12 23:55:14 +00:00
nbd
356535ffd7 move platform specific base-files into target/linux/<targetname> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5621 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2006-11-22 23:27:29 +00:00