1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-07 14:23:43 +02:00
Commit Graph

1033 Commits

Author SHA1 Message Date
juhosg
a5e8c5446f ar71xx: add preliminary support for the Atheros AR933x SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:26 +00:00
juhosg
68169c24f2 ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2
NETGEAR doesn’t produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.

This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.

There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:25 +00:00
juhosg
fc50c6a3b6 ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:22 +00:00
juhosg
eaa759a8e5 ar71xx: Fix header offset for newer WRT160NL models
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:20 +00:00
juhosg
5b9155beba ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27048 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:19 +00:00
juhosg
92e4bfb535 ar71xx: reduce the size of the squashfs-4k binaries
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:18 +00:00
juhosg
bd8a2aaee9 ar71xx: initialize is_clk_25mhz field for AR9340 WMAC
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:15 +00:00
juhosg
c772123439 ar71xx: sync ath9k_platform_data.h with compat-wireless
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:14 +00:00
juhosg
ee7a116328 ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:13 +00:00
juhosg
20d6650643 ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:12 +00:00
juhosg
75e1476cce ar71xx: ag71xx: make ring sizes configurable via ethtool
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:10 +00:00
juhosg
a137dec884 ar71xx: ag71xx: prepare to make ring sizes configurable
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27040 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:09 +00:00
juhosg
940317dc35 ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define
Reported-by: Dave Täht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:07 +00:00
nbd
debcf79f90 ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27035 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-30 23:08:01 +00:00
nbd
20aef6d6fc ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27034 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-30 23:07:57 +00:00
matteo
005a65e01d ar71xx: don't probe the LAN PHY
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-17 11:15:24 +00:00
matteo
483991c363 ar71xx: detect link on LAN ports
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-17 11:12:56 +00:00
matteo
511dea0dac ar71xx: add link detection on Ubiquiti devices WAN port
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-14 23:31:50 +00:00
matteo
51053e7640 use correct macros and frame size in ag71xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-14 23:10:06 +00:00
matteo
0cbd6d9057 ar71xx: cosmetic fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-14 23:08:00 +00:00
juhosg
b500b67652 ar71xx: populate LED3 on the JA76PF board
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:51 +00:00
juhosg
b3a8c8a5ce ar71xx: add uci config for the WLAN LED on the WRT160NL
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:49 +00:00
juhosg
a1c5a3da98 ar71xx: use phy0tpt trigger for the WLAN LEDs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:48 +00:00
juhosg
5b6a159d03 ar71xx: remove superfluous fifo_cfg overrides
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26859 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:46 +00:00
juhosg
bb14a2f07c ar71xx: ag71xx: make switch register access atomic
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 16:32:53 +00:00
juhosg
0511a7adf1 ar71xx: ag71xx: fix section mismatch warnings
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 13:30:36 +00:00
juhosg
14088891b0 ar71xx: ag71xx: fix build error if debugfs is enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 13:30:26 +00:00
juhosg
e5061b1935 ar71xx: ag71xx: add debugfs entry for [rt]x_ring
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:34 +00:00
juhosg
5155342ee7 ar71xx: ag71xx: add timestamps to ag71xx_buf
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:28 +00:00
juhosg
5e10b16d95 ar71xx: ag71xx: use dynamically allocated buffer for napi_stats
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:26 +00:00
juhosg
f6816e49d9 ar71xx: ag71xx: use debugfs_remove_recursive
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:25 +00:00
juhosg
193e04ebee ar71xx: override wmac device name for the AR934x SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 09:23:32 +00:00
acoul
348cbe4bd3 linux/ar71xx: add some missing symbols for nand/yaffs targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05 07:19:46 +00:00
nbd
118a9c5154 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26779 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-28 21:27:42 +00:00
nbd
8220523bad ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26777 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-28 19:30:49 +00:00
acoul
b7a26a735b linux/ar71xx: update wget2nand script
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26747 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-21 12:38:25 +00:00
acoul
dfba2f5fb1 linux/ar71xx: add 2.6.38 preliminary support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26746 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-21 11:45:23 +00:00
nbd
e54866b2fb ar71xx: enable the ip17xx PHY driver (fixes #5193, #8027)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-14 23:51:12 +00:00
nbd
c39d45cf13 ar71xx: replace the madwifi profile with an ath5k profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 21:10:45 +00:00
juhosg
b5cfb56ed4 ar71xx: fix build error w/o CONFIG_PCI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 13:14:56 +00:00
juhosg
73318c1013 ar71xx: don't hardcode console parameters in kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 13:14:53 +00:00
juhosg
ec1dcc5bda ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 09:29:21 +00:00
juhosg
b47906964d ar71xx: Add support for WZR-HP-G301NH
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 09:29:10 +00:00
juhosg
2be7aaf5c2 ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-11 17:37:08 +00:00
juhosg
613a88e6a5 ar71xx: fix AR934X_WMAC_SIZE
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-11 17:37:03 +00:00
juhosg
9330419fa7 ar71xx: fix section mismatch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-09 18:47:55 +00:00
juhosg
f2a69b10a8 ar71xx: rename ar934x_ref_freq to ar71xx_ref_freq
Also initialize that for each SoC and print its value along with the
other frequencies.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-09 18:47:52 +00:00
juhosg
f4bb6b6582 ar71xx: show the SoC type earlier
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-09 18:47:50 +00:00
juhosg
8de3a1a306 ar71xx: cleanup SoC detection code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-09 18:47:49 +00:00
juhosg
b9fe109d2b ar71xx: sync kernel configuration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-09 18:47:45 +00:00