juhosg
a7bf55a712
ar71xx: use different machtype and setup for the TL-MR3040
...
Should fix #12211 . Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24 18:45:56 +00:00
juhosg
484998f83f
ar71xx: fix a typo in TEW-637GRU image names
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18 14:32:25 +00:00
juhosg
0cfc5d05b3
ar71xx: revert DIR-825-B1 wholeflash image support.
...
It should be implemmented in a cleaner way.
This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18 14:30:57 +00:00
cshore
4e7d8aa302
[ar71xx] dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images).
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 14:17:12 +00:00
nbd
9d164b87ca
ar71xx: fix WP543 image builds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-15 10:21:21 +00:00
cshore
60244743f9
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-06 18:15:26 +00:00
juhosg
80cd7e164b
ar71xx: image: fix Profile name for TL-WA701 ( closes #12094 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:30 +00:00
juhosg
54b8dcd696
ar71xx: generate image for ALL0315N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:37 +00:00
juhosg
dbf3c1bc27
ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N
...
Commit 4878806326
(r33251) introduced a
regression with board= kernel command line parameter incorrectly
initialised.
The faulty builds propogated to the snapshots download area. This makes
the device unbootable and TP-Link users have to attach the serial to
recover.
Here is the q&d way i used to identify MIPS boards that didn't have a
corresponding entry in the image/Makefile:
for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \
| sed -n '/MIPS_MACHINE/ { s/^[^"]*"\([^"]*\)".*$/\1/; p; }'`; do
grep -q ,$i, Makefile || echo $i;
done > missing-boards.new
Reported-by: Casper on IRC
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-26 08:15:11 +00:00
juhosg
c76c0db809
ar71xx: image: fix TL-WR1043ND board id ( #12079 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-26 06:30:37 +00:00
juhosg
a67ed5995a
ar71xx: image: group and sort {Single,Multi}Profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:17:47 +00:00
juhosg
069b91b062
ar71xx: image: group and sort mtdlayout definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:14:35 +00:00
juhosg
9b5adee41c
ar71xx: image: use the MultiProfile helper for the Madwifi profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:11:25 +00:00
juhosg
435453d8a3
ar71xx: image: automatically build a list of SingleProfiles
...
Use that for Default/Minimal profiles.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:08:15 +00:00
juhosg
c867446b4a
ar71xx: image: use the new helpers for the ZyXEL images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:05:05 +00:00
juhosg
4f6630ddb2
ar71xx: image: use the new helpers for the Zcomax images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:01:55 +00:00
juhosg
3645b6d44e
ar71xx: image: use the new helpers for the WRT400 images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:58:45 +00:00
juhosg
072e9e5744
ar71xx: image: use the new helpers for the WZRHPG30XNH images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:55:35 +00:00
juhosg
fe826b8e2c
ar71xx: image: use the new helpers for the WHRHPG300N images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:52:25 +00:00
juhosg
41d5b181ae
ar71xx: image: use the new helpers for the UBNTXM images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:49:15 +00:00
juhosg
cdddcb4ede
ar71xx: image: use the new helpers for the UBNT images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:46:06 +00:00
juhosg
08ae5bbdaa
ar71xx: image: use the new helpers for the TPLINKOLD images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:42:56 +00:00
juhosg
3af6ef2080
ar71xx: image: use the new helpers for the TPLINK-LZMA images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:39:46 +00:00
juhosg
4878806326
ar71xx: image: use the new helpers for the TPLINK images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:36:35 +00:00
juhosg
2df83311ab
ar71xx: image: use the new helpers for the Planex images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:33:25 +00:00
juhosg
89b72fa088
ar71xx: image: use the new helpers for the PB4X images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:30:15 +00:00
juhosg
cd5096a452
ar71xx: image: use the new helpers for the OpenMesh images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:27:06 +00:00
juhosg
c5fd4a67fa
ar71xx: image: use the new helpers for the Netgear images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:23:56 +00:00
juhosg
57b7bec0b0
ar71xx: image: use the new helpers for the MyLoader images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:20:46 +00:00
juhosg
55c69ab521
ar71xx: image: use the new helpers for the DIR825B1 images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:17:36 +00:00
juhosg
449961173c
ar71xx: image: use the new helpers for the CyberTAN images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:14:26 +00:00
juhosg
98d04da6fa
ar71xx: image: use the new helpers for the Cameo933x images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:11:17 +00:00
juhosg
fb9ba483e0
ar71xx: image: use the new helpers for the Cameo913x images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:08:07 +00:00
juhosg
9073bd44bb
ar71xx: image: use the new helpers for the Cameo7240 images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:04:57 +00:00
juhosg
768c8436a9
ar71xx: image: use the new helpers for the AthGzip images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33240 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:01:47 +00:00
juhosg
1c1bce03f5
ar71xx: image: use the new helpers for the AthLzma images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33239 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 11:58:37 +00:00
juhosg
35070c0487
ar71xx: image: use the new helpers for the ALFA images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 11:55:27 +00:00
juhosg
15ae10b4f4
ar71xx: image: add a few helper functions
...
These functions will be used to simplify the Makefile.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 11:52:18 +00:00
juhosg
0f07b6e127
ar71xx: image: pass mtdlayout as a separate parameter for the ALFA template
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 11:49:07 +00:00
juhosg
1d7b7628b0
ar71xx: add profile and build image for the TEW-712BR
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 20:18:44 +00:00
juhosg
13378c7f3c
ar71xx: fix mtd layout of the AP113
...
The 'mtdparts=' prefix and the name of the flash device is missing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33226 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 12:39:46 +00:00
juhosg
d27564d094
ar71xx: add ALL0305 board alias
...
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33224 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 12:33:22 +00:00
juhosg
1eb25d5c4f
ar71xx: add support for TP-Link TL-WDR3600
...
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.
[juhosg: remove the custom machine type, change the board name instead]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 09:43:18 +00:00
juhosg
7750261206
ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 09:54:41 +00:00
juhosg
70b3c1262b
ar71xx: image: allow to use board specific code in the lzma-loader
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 09:54:33 +00:00
juhosg
62dfbdafd5
ar71xx: ew-dorin: added router firmware generation
...
[juhosg: remove dead code]
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:24:57 +00:00
juhosg
b80a2c45e4
ar71xx: Buffalo WLAE-AG300N initial support
...
The patch set for Buffalo WLAE-AG300N initial support.
There is another patch for wireless led support that
is posted separately.
Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.
[juhosg: fix coding style]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:24:52 +00:00
juhosg
9c4d41a426
ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0
...
The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is
identical, but requires different firmware headers:
TL-WDR4300:
00000040 43 00 00 01 00 00 00 01 00 00 00 00 76 fb 83 40 |C...........v..@|
TL-WDR4310:
00000040 43 10 00 01 00 00 00 01 00 00 00 00 38 2b 50 6c |C...........8+Pl|
[juhosg: change commit message, use a different model name]
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-12 13:38:40 +00:00
juhosg
cc8ef03faa
ar71xx: set firmware version for the TL-WR2543N
...
This ensures that the resulting firmware can
be flashed from the latest (v3.13.17) offical
firmware.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 16:25:31 +00:00
juhosg
dd71ce4e82
ar71xx: add profile and build image for the Atheros AP136 reference board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32609 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 08:26:51 +00:00