qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-13 06:49:22 +02:00
Code
24,385 Commits 13 Branches 0 Tags 117 MiB
b079ac667f
Commit Graph

857 Commits

Author SHA1 Message Date
juhosg
a17e6cf40e ar71xx: use ap91_pci_init for RB751{,G} 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31356 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:48 +00:00
juhosg
9b7ceff90a ar71xx: move USB device registration directly into rb751{,g}_setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31355 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:43 +00:00
juhosg
e25325e131 ar71xx: add ap9x_pci_get_wmac_data helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31354 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:42 +00:00
juhosg
9ec35a5650 ar71xx: add sanity checks to decode_rle 
Also use -EINVAL instead of -1.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31353 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:40 +00:00
juhosg
87485f3a88 ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD 
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31208 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-06 06:45:07 +00:00
juhosg
7bc411c5d9 ar71xx: boost SPI flash read performance 
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31118 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:17 +00:00
juhosg
32fd04f49a ar71xx: remove the built-in MTD map of the AP96 board 
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31112 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:07 +00:00
juhosg
514a769538 ar71xx: remove the built-in MTD map of the PB92 board 
Pass the mtd_layout via the kernel command line instead

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31111 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:05 +00:00
juhosg
5ca96e340c ar71xx: remove the built-in MTD map of the Zcomax devices 
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:04 +00:00
juhosg
e27017a728 ar71xx: remove the built-in MTD maps of several boards 
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31108 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:01 +00:00
juhosg
70b0829237 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:37:51 +00:00
juhosg
fd48e871d0 ar71xx: add initial support for RB750GL 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31025 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:57:04 +00:00
juhosg
c8aab4b6c2 ar71xx: make rb750_latch_change 'static void' 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31024 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:57:03 +00:00
juhosg
58ce76e6b5 ar71xx: add latch_change field to rb750_led_platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31023 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:57:01 +00:00
juhosg
e929396e19 ar71xx: add platform data for the RB750 NAND driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:56:59 +00:00
juhosg
1a9e33b337 ar71xx: add AR934x specific interface speed setup for ge0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31017 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 11:11:20 +00:00
juhosg
be8e44bc68 ar71xx: add support for the jjPlus JA76PF2 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30957 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-16 18:00:34 +00:00
juhosg
aaa7c394a3 ar71xx: change LED name prefix on the jjplus boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-16 18:00:26 +00:00
juhosg
263a705cc6 ar71xx: move micrel PHY driver to the generic linux target 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30946 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-15 09:25:53 +00:00
juhosg
1d9a77e99f ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30926 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 17:29:38 +00:00
juhosg
0fced5df74 ar71xx: ag71xx: start aneg on switch PHYs after reset 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 17:29:37 +00:00
juhosg
9d0c4ce009 ar71xx: ag71xx: poll PHY status of all available switch ports 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 17:29:36 +00:00
juhosg
d2b8246b44 ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30923 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 17:29:34 +00:00
juhosg
f9450e76b1 ar71xx: reset the switch on AR934x before ethernet device registration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 17:29:33 +00:00
juhosg
510f76eab5 ar71xx: use a dummy callback for interfaces with fixed speed 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30913 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-12 20:38:58 +00:00
juhosg
710f4ecdd1 ar71xx: merge ar934x_bo_ddr_flush patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30912 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-12 20:38:57 +00:00
juhosg
f69d75cd5e ar71xx: fix WPS button polarity on TL-WR2543N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-07 19:50:53 +00:00
juhosg
d32129c110 ar71xx: ag71xx: fix get_port_link callback 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30841 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-07 16:32:35 +00:00
juhosg
4a420c6fa2 ar71xx: ag71xx: use the generic get_port_link implementation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-07 16:32:34 +00:00
juhosg
78859ab57d ar71xx: ag71xx: keep VLAN tags if VLAN is not enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30768 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-01 19:49:05 +00:00
juhosg
ee8624ffde ar71xx: ag71xx: add BQL support 
It will be usable only from linux-3.3.

Based on a patch by Dave Taht <dave.taht@bufferbloat.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30417 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-10 14:56:47 +00:00
juhosg
33ec8951f8 ar71xx: add preliminary support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-10 11:53:56 +00:00
juhosg
8940cbc303 ar71xx: merge 3.2 fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30406 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-10 08:19:33 +00:00
juhosg
d9077e15ae ar71xx: merge files-3.2 to files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30405 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-10 08:19:31 +00:00
juhosg
41e9c172ba ar71xx: use dynamically allocated partitions in wrt160nl_part 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29970 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-31 18:36:51 +00:00
juhosg
22b99f32a1 ar71xx: move arch specific files to files-2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29867 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 22:38:11 +00:00
juhosg
acc9c3cbf5 ar71xx: wrt160nl_part: include module.h and fix compiler warnings 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29856 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 17:55:38 +00:00
juhosg
681c0cf274 ar71xx: tplinkpart: include module.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29855 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 17:55:36 +00:00
juhosg
523cf1638c ar71xx: rename vsc7385 spi driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29853 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:57 +00:00
juhosg
e3c5dcc5ee ar71xx: rename ap81 spi driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29852 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:56 +00:00
juhosg
047bbb085a ar71xx: rename rb4xx spi drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:54 +00:00
juhosg
d73151f6d4 ar71xx: rename the nxp_74hc153 driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:52 +00:00
juhosg
3746d2ed29 ar71xx: change board id of the UniFi board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:50 +00:00
juhosg
fa5eb96b17 ar71xx: include linux/module.h in the micrel phy driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:49 +00:00
juhosg
1b3efb3352 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29713 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 18:00:50 +00:00
juhosg
6734a832bc ar71xx: pb44_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:18 +00:00
juhosg
7bb349bc59 ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:17 +00:00
juhosg
ddfc10f668 ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29708 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:15 +00:00
juhosg
3e74da5245 ar71xx: ar71xx_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29707 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:14 +00:00
juhosg
8e61fd2405 ar71xx: ar71xx_spi: save and restore regs from probe/remove 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:13 +00:00
juhosg
302dc3a936 ar71xx: ar71xx_wdt: add shutdown handler 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:11 +00:00
juhosg
19be413163 ar71xx: add initial support for the TL-WR2543N/ND board 
The WLAN LEDs are not working yet.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:35 +00:00
juhosg
54bc3d42c4 ar71xx: local mac support on the wndr3700 
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29675 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 17:24:44 +00:00
juhosg
01c809eff1 ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 07:20:59 +00:00
juhosg
c63a29ee7f ar71xx: fix sections mismatch warnings in the nand drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29667 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-05 18:08:33 +00:00
juhosg
b8e2e95b70 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 21:13:54 +00:00
juhosg
86c95a9481 ar71xx: allow to use the command line hack on compex devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29659 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:58 +00:00
juhosg
bf238aa8e9 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:57 +00:00
juhosg
9229d15c65 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:50 +00:00
juhosg
2b1cf2b32c ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:47 +00:00
juhosg
fd1bdc7c45 ar71xx: add support for the ALFA Network N2/N5 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:25 +00:00
juhosg
a604775f66 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:46 +00:00
juhosg
b042bd4e4d ar71xx: ag71xx: implement get_port_{link,stats} callbacks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:26 +00:00
juhosg
096af0d2e8 ar71xx: fix LEDs on the WRT400N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 13:54:11 +00:00
nbd
2ca2cb6c37 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-22 05:43:53 +00:00
jow
674429b24f [ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-21 01:27:48 +00:00
nbd
eaf9c95caf ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 09:04:15 +00:00
nbd
cdf64b5cdc ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-18 22:20:17 +00:00
juhosg
12930c3272 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:38 +00:00
juhosg
ba50354437 ar71xx: add defines for the AR934X GMAC interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:36 +00:00
juhosg
a55b188ebe ar71xx: fix GMAC1 interface speed on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:35 +00:00
juhosg
8e8e3fdde7 ar71xx: ag71xx: fix switch port setup for AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:32 +00:00
juhosg
07d1bcb923 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:30 +00:00
juhosg
cb5f456a33 ar71xx: ag71xx: setup switch interface mode on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:29 +00:00
juhosg
f97a00297e ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:28 +00:00
juhosg
e61b2d1ed9 ar71xx: allow to attach the internal switch for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:22 +00:00
juhosg
812763d48e ar71xx: introduce ar71xx_switch_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:11 +00:00
juhosg
57705b7a08 ar71xx: tplinkpart: allow to detect JFFS2 as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:40 +00:00
juhosg
08d268c8a7 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:23 +00:00
juhosg
a82d9221c9 ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:21 +00:00
juhosg
ba116ade9e ar71xx: ag71xx: nuke ar7240sw_init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:20 +00:00
juhosg
803afe6e40 ar71xx: fix mac addresses on jjPlus devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:18 +00:00
juhosg
d8f4833329 ar71xx: add support for ALFA Network's Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:10 +00:00
juhosg
33334db9dc ar71xx: add GPIO function bit defines for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:07 +00:00
nbd
5841748e56 ar71xx: fix gpio count for ar7241/ar7242 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:47:24 +00:00
nbd
75bbe95c04 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:21:42 +00:00
nbd
340372534c kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29516 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 15:14:59 +00:00
nbd
e7bf9d2f6d ar71xx: fix wireless led on wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 15:00:43 +00:00
juhosg
17595c4da2 ar71xx: enable AR9341 support at setup.c 
Patch-by: dyq <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 14:59:43 +00:00
juhosg
6caa8876b2 ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 14:59:40 +00:00
nbd
ec66b62afa ar71xx: add gpios and usb for wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 13:33:44 +00:00
juhosg
1e26277d1e ar71xx: use RedBoot parser on PB44 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-11 15:52:47 +00:00
juhosg
99997320ea ar71xx: use correct mac on the lan interface on several TP-LINK devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:10:58 +00:00
juhosg
a97fd90341 ar71xx: allow to pass negative offset values for ar71xx_init_mac 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29457 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:10:55 +00:00
juhosg
097436bca8 ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29456 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 18:21:15 +00:00
juhosg
35606f14a3 ar71xx: check squashfs signature in TP-Link mtd parser 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:33 +00:00
nbd
c1679af6b3 ar71xx: add preliminary support for wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:20:51 +00:00
nbd
f684eb2454 ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:20:44 +00:00
juhosg
44a7438217 ar71xx: rewrite WNDR3700/3800 handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 13:03:54 +00:00
juhosg
11a837ce02 ar71xx: use the tp-link parser on the tp-link boards 
Also remove static partition maps.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29416 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:31 +00:00