qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-26 10:21:09 +02:00
Code
17,579 Commits 13 Branches 0 Tags 117 MiB
b28139ae87
Commit Graph

6375 Commits

Author SHA1 Message Date
Xiangfu Liu
c270b55a98 [linux] support increase/decrease in screen brightness 
Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>
 2011-05-10 06:59:29 -08:00
kyak
cd8421699a NAND DATA Partition offset and reflash_ben.sh fixed according to 512 
Mb rootfs
 2011-05-10 06:59:29 -08:00
Xiangfu Liu
e08c11fdd6 adjust the rootfs partiton size to 512MB 2011-05-10 06:59:28 -08:00
Xiangfu Liu
89b0b97506 some cleanup about xburst target 
- make zImage compile fine
 - set the ip addr to 192.168.254.101
 - add more tty
 - format nand partition to 3
 - cleanup keyboard
 - cleanup gmp940b driver
 - add color font patch, use setfont2 in userspace
 - add FPU in config, change font to 6x11
 - add default CMDLINE, which is for zImage

Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>
 2011-05-10 06:59:27 -08:00
nbd
408a49aa39 adm5120: fix promiscuous mode handling (patch from #8581), backport of r26673 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@26674 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-15 00:21:27 +00:00
nbd
2d335ddc1c ar71xx: sync ethernet driver changes with trunk to fix MDIO issues on ar7240 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@26672 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-15 00:05:44 +00:00
nbd
c8564630f3 ar71xx: enable the ip17xx PHY driver (fixes #5193, #8027), backport of r26670 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@26671 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-14 23:51:55 +00:00
nbd
cb11bee0cf kernel: backport support for w25q64 flash chips - fixes flash detection on new Ubiquiti M hardware 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@26581 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-10 18:57:58 +00:00
nbd
3e9da9b162 rtl8306: do not overwrite registers in the phy fixup, it could mess up other switches (fixes #8911), backport of r26410 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@26411 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-02 16:36:17 +00:00
juhosg
fcde4daf31 backfire: ar71xx: create firmware image for the WNDR3700v2 board (backport of r25119) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@26117 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-13 14:54:05 +00:00
juhosg
d0e868b3f0 backfire: ar71xx: add support for the WNDR3700v2 board (backport of r25118) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@26116 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-13 14:54:01 +00:00
juhosg
f8a8be82d9 backfire: ar71xx: rework WNDR3700 image generation (backport of r24983) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@26114 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-13 14:53:53 +00:00
juhosg
15db4b1570 backfire: ar71xx: build separate image for the WNDR3700 with NA region (backport of r24982) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@26113 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-13 14:53:50 +00:00
nbd
a1f09a42a5 kernel: backport EAP bridge fix from r26015 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@26019 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-10 19:04:29 +00:00
nbd
cf371e4800 kernel: merge the eap frame drop fix for the bridging code from r25095 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@25364 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-02-04 21:04:30 +00:00
juhosg
6f0d16ded6 backfire: ar71xx: add rtl8366s initvals for the DIR-825 board (backport of r25121) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@25257 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-30 21:15:06 +00:00
juhosg
04144c111c backfire: generic: rtl8366s: allow initial register values to be passed via platform_data (backport of r25120) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@25256 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-30 21:15:02 +00:00
jow
0c48bb213c [backfire] merge r23293 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@25211 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-28 17:07:08 +00:00
juhosg
c4b72922ba backfire: generic: rtl8366: enable vlans before enabling the ports (backport of r24939) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24999 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 18:19:52 +00:00
juhosg
12e380be62 backfire: generic: rtl8366: enable ports only after VLAN configuration is done (backportof r24938) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24998 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 18:19:47 +00:00
juhosg
b5e2cd6155 backfire: generic: rtl8366: add enable_port helper (backport of r24937) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24997 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 18:19:41 +00:00
juhosg
8df64213e2 backfire: generic: rtl8366_smi: init VLANs only in first switch initialization (backport of r24936) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24996 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 18:19:36 +00:00
juhosg
dfb3103e2a backfire: generic: rtl8366s: use correct bitmasks in sanity checks (backport of r24935) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24995 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 18:19:33 +00:00
juhosg
69b6d709fd backfire: generic: rtl8366s: add vlan fid support (backport of r24934) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24994 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 18:19:29 +00:00
juhosg
d1cd0e74c7 backfire: generic: rtl8366: add debugfs file for VLAN4K table (backport of r24933) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 18:19:25 +00:00
juhosg
663164bc40 backfire: generic: rtl8366rb: use correct bitmasks in sanity checks (backport of r24930) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24991 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 18:19:18 +00:00
juhosg
c1d2e98adb backfire: generic: add rtl8366rb switch vlan fid support (backport of r24125) 
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24990 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 18:19:13 +00:00
juhosg
48de68f691 backfire: rt8366*: use __devinit instead of __init for the probe function to fix a section mismatch (backport of r23573) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24989 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 18:19:09 +00:00
juhosg
3bf4bd7bec backfire: generic: add rtl8366rb switch port rate, port and qos enable/disable support (backport of r23126) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24988 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 18:19:05 +00:00
juhosg
2b6605278b backfire: ar71xx: fix wlan LED on the TL-WR741 board (backport of r24963) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24965 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-11 09:12:11 +00:00
juhosg
a4965bc691 backfire: ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards (backport of r24568) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24964 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-11 09:12:05 +00:00
juhosg
89a59ff8b7 backfire: ar71xx: Configure WNDR3700 switch LED colors properly (backport of r23879) 
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24960 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-10 18:07:51 +00:00
juhosg
bd9ed81d82 backfire: ar71xx: add kmod-usb-ohci module for the WNDR3700 profile (backport of r24927) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24928 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 10:53:50 +00:00
juhosg
33a6ccc320 backfire: ar71xx: fix micrel phy patch (backport of r24718) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24926 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 10:18:09 +00:00
juhosg
b7a8206f35 backfire: ar71xx: fix WLAN LEDs on the DIR-825 board (backport of r24650) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 10:17:54 +00:00
juhosg
0c041daff4 backfire: ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards (backport of r24649, r24651) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 10:17:49 +00:00
juhosg
67fa44f5be backfire: ar71xx: populate LED configuration for WZR-HP-G300NH (backport of r24642) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24923 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 10:17:45 +00:00
juhosg
02e8d43c37 backfire: ar71xx: add wlan led for the TL-WR941ND (backport of r24612) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 10:17:42 +00:00
juhosg
e21f26857b backfire: ar71xx: improve the wndr3700 quirks (backport of r23822, r23875) 
- move most of the code out of ath9k and instead allow the
  platform device to specify gpio overrides
- fixes 5ghz signal strength issues

git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24921 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-08 10:17:35 +00:00
hauke
368b56d65f kernel: backport a kernel locking fix needed for carl9170. 
This fix is included in all kernel versions released after mid august like 2.6.32.27.


git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24492 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-11 19:13:51 +00:00
hauke
7403cc76a9 kernel: update from version 2.6.32.25 to 2.6.32.27 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24490 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-11 17:26:04 +00:00
nbd
87fe054b87 ar71xx: merge pci register read workaround from r24236 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24240 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-04 10:31:18 +00:00
jow
5f1097202b [backfire] merge r24195 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24233 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-03 23:49:48 +00:00
jow
13da70db11 [backfire] merge r24196 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24197 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-30 02:05:41 +00:00
nbd
b3cdadf5b5 x86: enable pci express support (backport of r24026) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24027 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-17 22:46:27 +00:00
florian
4405aa6006 backport r24006 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24007 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-15 14:38:05 +00:00
juhosg
7f211c3a58 backfire: generic: update gpio_buttons driver (backport of r23984) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@23985 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 22:46:00 +00:00
hauke
766ef77087 kernel: update from kernel 2.6.32.16 to kernel 2.6.32.25 and refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@23915 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-07 15:59:49 +00:00
florian
4a6b490fea backport r23862 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@23864 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 14:14:06 +00:00
nbd
b819e54459 make the display support feature flag selectable (backport from r23791) 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@23792 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-02 16:28:11 +00:00