- split antenna options into rxantenna and txantenna to bring it in line with broadcom and madwifi
- get rid of temporary variables
- follow the documented config protocol for wep keys (option key # + option key# [s:]data)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25116 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add new options 'bintval' (beacon interval), 'basicrates' (basic rates) and
'antenna' (antenna selection) for /etc/config/wireless to be used with
mac80211 drivers.
Enable WEP encryption for IBSS mode.
Patch from: kentarou matsuyama <matsuyama@thinktube.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25111 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add support of mac address filter. Now 'macfilter' and 'maclist' options
can be used with mac80211.
Patch from: kentarou matsuyama <matsuyama@thinktube.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25105 3c298f89-4303-0410-b956-a3cf2f4a3e73
sometimes an interface does not get added to the bridge properly
this seems to be a race of interface setup vs wpa_supplicant
fix this by configuring the interface only after wpa_supplicant has been started
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20106 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since client mode in mac80211is unreliable without using wpa_supplicant,
it would be better to enable wpa_supplicant by default.
With this patch, wpa_supplicant will always be used for mac80211-based
drivers in client mode. This will break client mode for images that
don't include wpa_supplicant or wpad, so maybe I need to add a check
somewhere to see if wpa_supplicant is available, and show the user a
warning if he tries client mode without wpa_supplicant. Suggestions on
where to add this check are welcome.
Tested with ath5k in client mode on open and wpa2-psk network, and
tested on my ath9k based AP as well to make sure it doesn't break AP mode.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19718 3c298f89-4303-0410-b956-a3cf2f4a3e73
use the new multi-bss single instance hostapd mode
move mac80211 specific bits out of /lib/wifi/hostapd.sh
add a new option 'htmode' for switching between HT20 and HT40+,HT40-
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19235 3c298f89-4303-0410-b956-a3cf2f4a3e73
- fix wep key handling in iw with mac80211 based drivers
- sanitize keys where necessary
- put a procedure prepare_key_wep() into /sbin/wifi for use by other driver backends
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19118 3c298f89-4303-0410-b956-a3cf2f4a3e73
Only G and L-PHY are supportted by b43 driver
Add squash firmware for b43legacy
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18947 3c298f89-4303-0410-b956-a3cf2f4a3e73
Use firmware 4.178.10.4 as default on.
Select firmware for all supported phy types and version as default.
Close ticket #5978
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18935 3c298f89-4303-0410-b956-a3cf2f4a3e73
A typo prevented it from working, tested with ar71xx and ath9k.
Signed-off-by: Otto Solares <solca@guug.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18719 3c298f89-4303-0410-b956-a3cf2f4a3e73
