qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-16 15:25:55 +02:00
Code
24,611 Commits 13 Branches 0 Tags 117 MiB
b769eff554
Commit Graph

24611 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
jogo
f0fe32e09a bcm63xx: reorder patches 
Fix the order and names of patches.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32920 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-31 14:27:25 +00:00
florian
4d018c5938 [at91] move i2c module to target modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32910 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-29 13:20:51 +00:00
florian
89b0288944 [package] partially revert r32855 
Too many modules were removed, while only the octeon module was meant to be
removed, fix that.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32909 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-29 13:20:47 +00:00
florian
cd3ef0bd78 [omap24xx] resync config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32908 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-29 13:20:39 +00:00
florian
56f8227537 [omap24xx] use the same description as other omap platforms (without the dash) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32907 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-29 13:20:35 +00:00
blogic
8be6a993ea [kernel] refresh pwm patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32905 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-29 11:53:06 +00:00
blogic
a06a201dcf [acx-mac80211] dont build on arm as kernel headers are missing/have a different layout 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32904 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-29 09:07:47 +00:00
blogic
f12d141fa0 [include] fix up scons vs ccache 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32902 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-28 21:06:59 +00:00
blogic
12c804da28 [kernel] clean up pwm patches and drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32901 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-28 20:47:08 +00:00
hauke
6771089f01 [kernel] add config option CONFIG_I2C_MV64XXX to fix kirkwood build 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32898 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-28 11:36:52 +00:00
florian
e5d6243baa [realview] resync config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 15:35:15 +00:00
florian
afc4f76011 [brcm63xx] fix DVA-G3810BN image generation 
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32894 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 15:35:12 +00:00
florian
5f0ec9d349 [brcm63xx] add D-link DVA-G3810BN-TL-1 support 
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32893 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 15:35:09 +00:00
florian
55bad547db [brcm63xx] Add CT6376-1 board support 
Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32892 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 15:35:05 +00:00
florian
37b093a702 [package] base-files: fix detection of standalone ldd 
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32891 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 15:35:00 +00:00
florian
14e3269c19 [brcm63xx] Add brcmsmac profile 
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32890 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 15:34:57 +00:00
blogic
008eb4f75b [mac80211] mae brcmutil depend on PCI and USB. This broke ar7 fullbuilds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32886 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 08:30:05 +00:00
blogic
0f80302310 [atheros] Add leds back after migration to sysfs 
atheros trunk moved to full sysfs gpiolib, but the leds were forgotten.
This restores the wlan led that was missing after switching from backfire
to trunk.

Signed-off-by: Karl Palsson <karlp@remake.is>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32885 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-26 17:06:55 +00:00
florian
72d6153213 [brcm2708] add more missing config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32884 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-26 17:03:08 +00:00
florian
0b6c36ebc1 [generic] add more USB-related config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32883 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-26 17:03:05 +00:00
florian
bbd4a26da8 [ep93xx] make sure target modules depend on the target 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32882 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-26 17:03:02 +00:00
hauke
cf6ccf73a0 [kernel] bcma: update to version from wireless-testing tag master-2012-07-16 
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-26 15:42:18 +00:00
florian
d458822492 [package] make kmod-mvsas depend on x86 since it fails building on other targets (eg: brcm63xx) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32878 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-26 09:29:22 +00:00
blogic
d6ccc66511 [ar71xx] fix typo in modules.mk 
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32870 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 19:52:30 +00:00
florian
bc858807dc [package] make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32869 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 19:36:19 +00:00
nbd
a596792a94 mtd: fix trx_fixup 
With the BRCM47xx image I have built (Linksys E3000), there are additional
writes following the completion of "mtd_replace_jffs2" which invalidate the
'trx_fixup' performed by 'mtd_replace_jffs2'.  Moving the 'trx_fixup' to somewhere
after all writes have completed fixes the problem.  I also noticed that 'erasesize'
used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by
'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this.

Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at
offset 0; which may be the cause of the problem described in Ticket #8960.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32866 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 17:28:32 +00:00
florian
670865f323 [ppc40x] move isp116x driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32865 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:45 +00:00
florian
ba7b4e1df0 [ramips] move rt305x-dwc driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32864 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:42 +00:00
florian
c68ad0c25b [brcm47xx] move ubsec-ssb driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32863 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:38 +00:00
florian
65f5ea534e [brcm47xx] move ssb-gige to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32862 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:36 +00:00
florian
ebd067e1dc [brcm47xx] move usb driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32861 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:33 +00:00
florian
62dbd02d2a [package] kmod-r6040 depends on PCI_SUPPORT 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32860 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:29 +00:00
florian
c9e5284b5a [avr32] move mmc driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32859 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:26 +00:00
florian
ef5f804159 [ixp4xx] move ixp4xx-eth to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32858 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:23 +00:00
florian
541619d96e [package] kmod-gpio-nxp74hc164 is not brcm63xx specific 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32857 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:20 +00:00
florian
c4d4dc6faf [ixp4xx] move crypto module to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32856 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:16 +00:00
florian
1bf0057f4d [octeon] move i2c driver to target modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32855 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:13 +00:00
florian
af1bbb3c56 [ar71xx] move watchdog driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32854 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:10 +00:00
florian
fb9582f0c9 [ar71xx] move target specific spi modules 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32853 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:04 +00:00
florian
c170356e03 [ar71xx] move target specific leds modules to ar71xx modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32852 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:02 +00:00
florian
03eb275e12 [x86] move leds modules back to target modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:49:57 +00:00
florian
c6fde74a29 [x86] move i2c modules back to target modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:49:54 +00:00
florian
323922dccc [package] fix network devices modules to depend on PCI instead of x86 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:49:52 +00:00
florian
e04ea40569 [x86] move more x86-specific modules back to target modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:49:49 +00:00
florian
c20837c0a2 [package] fix libsas and mvsas dependencies against PCI and not x86 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32847 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:49:46 +00:00
florian
aced68717a [x86] move x86 specific ide/pata modules to x86' modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32846 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:49:42 +00:00
hauke
bf02882bea brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32845 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 14:52:00 +00:00
florian
fb6f391168 [kernel] add yet another framebuffer symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 14:01:57 +00:00
florian
cdd132c493 [package] split framebuffer helper modules to their own packages 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 14:01:54 +00:00
florian
b32c8c7dca [cobalt] remove broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32842 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 14:01:51 +00:00