1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 04:25:11 +02:00
Commit Graph

8098 Commits

Author SHA1 Message Date
nbd
b9f3675439 geos: include pppstats and pppdump in default packaging
As the Geos box includes an ADSL modem that's targeted towards PPPoE, PPPoA, and bridged utilization, including these useful tools allows for easier configuration and troubleshooting.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27743 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-24 08:41:58 +00:00
nbd
c9e45803ce ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27739 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-24 08:02:20 +00:00
kaloz
2bff5d1962 [ppc44x]: upgrade to 3.0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-23 20:44:08 +00:00
kaloz
670f7774c1 [orion]: upgrade to 3.0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-23 20:43:53 +00:00
kaloz
ab55d005ac [generic]: 3.0 is out
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-23 20:42:58 +00:00
hauke
b6c46c6358 brcm47xx: build bcma into the kernel
Now we can assume that every brcm47xx kernel has the bcma module build
into the kernel. This is not needed for this version as this does not
support bcma as system bus but kernel 3.0 will.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-23 11:19:58 +00:00
hauke
297e15bc70 kernel: update bcma and ssb to version master-2011-07-22 from wireless-testing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27731 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-23 11:17:00 +00:00
hauke
537f6d3b0f brcm47xx: remove old kernel versions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27724 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-22 18:41:24 +00:00
hauke
31a40f97ef brcm47xx: update bcma and ssb to master-2011-07-21
* add new patches for bcm4716 SoC
* add support for serial flash on bcma bus


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-22 16:30:42 +00:00
hauke
13a779d3f3 kernel: update to linux-3.0 and refresh patches.
Thank you Peter Wagner for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-22 16:04:25 +00:00
nbd
3bad82d2e7 ar71xx: reinitialize global switch settings after reset on ar7240
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 14:39:47 +00:00
nbd
340551c062 ar71xx: configure address aging on ar7240
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 14:39:42 +00:00
nbd
8ea4f149b0 ar71xx: reset the phy in the ethernet init on ar724x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 12:04:34 +00:00
nbd
96c14099ce ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 12:04:29 +00:00
nbd
9dfcd7e5e2 ar71xx: increase the delay after the ethernet MAC reset
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 12:04:25 +00:00
nbd
db4cd49d62 ar71xx: fix an unused variable warning
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 12:04:20 +00:00
blogic
8781ae1fa3 sync default kernel config for lantiq danube/ar9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27697 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-19 18:08:09 +00:00
blogic
ec935c592f fix etehrnet when using EPHY on lantiq ASE
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-19 18:06:52 +00:00
blogic
2d3d3c4f6e fixes pci on lantiq AR9 SoC
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-19 18:06:42 +00:00
blogic
5aa1413d89 add support for more lantiq AR9 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-19 18:06:33 +00:00
nbd
104f21b348 kernel: backport and enable tmpfs xattr support for 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27691 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-19 09:00:55 +00:00
blogic
4b388ef792 [lantiq]
* fix external interrupts

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-18 16:27:11 +00:00
blogic
b43c756e4c [lantiq]
* add gigasx76x update
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-17 19:27:44 +00:00
florian
96e2c85b97 [ar7] add additionnal debug symbols when kernel debugging is enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-17 12:30:04 +00:00
florian
9ee9f66b5f [brcm63xx] add ehci support to DWV-S0 board (#9059)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27622 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-16 08:39:04 +00:00
florian
e43c771244 [brcm63xx] fix GEN_SPI_RSET_BASE macro (#9697)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-13 09:33:11 +00:00
kaloz
7c0785c307 [generic]: upgrade to 3.0-rc7
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-12 13:44:16 +00:00
kaloz
dc2c30ab96 [orion]: upgrade to 3.0-rc6 and optimize for armv5te again
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-11 20:35:16 +00:00
nbd
ec8e57edd9 ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-09 06:30:13 +00:00
nbd
cc32100390 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-09 06:29:46 +00:00
kaloz
959037c889 [cns3xxx/3.0]: use the new upstream l2cache and wdt code, smaller changes, refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-08 09:41:07 +00:00
kaloz
53512ff331 [generic/3.0]: add mpcore_wdt fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-08 09:33:13 +00:00
blogic
3bc6f3a20f fix generation of falcon images for profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 20:20:51 +00:00
blogic
50f83cd332 adds 2 ASC related patches to lantiq
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 20:20:46 +00:00
blogic
76628e7f3f fix up falcon kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27542 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 18:20:56 +00:00
blogic
096b823d77 fix i2c-falcon kmod package selection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 18:20:51 +00:00
blogic
43ab5eea8e replace all references to xway with danube
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 18:20:37 +00:00
blogic
d8b94e0eba fix lantiq image makefile to represent new split between ar9 and danube
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 18:20:31 +00:00
blogic
f79f43253c add ar9 specific profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 18:20:27 +00:00
blogic
e59bcdde3e rename xway profile to danube and remove ar9 specifics
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 18:20:21 +00:00
blogic
4130b70d43 remove ar9 board from xway profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 18:20:16 +00:00
blogic
c8b7636f71 remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 18:20:07 +00:00
kaloz
145f06f8eb [cns3xxx]: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 17:18:50 +00:00
kaloz
72a7b90977 [cns3xxx]: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 17:18:06 +00:00
kaloz
03d352a4dc [cns3xxx]: enable smp support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 17:17:44 +00:00
kaloz
f03e9c5d7f [cns3xxx]: make smp code more similar to upstream
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 17:17:06 +00:00
kaloz
af0b474c6e [generic/3.0]: 3.0 is at rc6 now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27524 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 13:30:41 +00:00
juhosg
d3310ebab9 ar71xx: build image for the AP121 boards with 4M of flash
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 13:01:50 +00:00
juhosg
142740d87d ar71xx: add separate profiles for the AP121 and AP121-MINI boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 13:01:48 +00:00
kaloz
a720db70de [generic/3.0]: add support for and switch to XZ compressed kernels on ARM
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 10:26:16 +00:00