1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 20:51:42 +02:00
Commit Graph

878 Commits

Author SHA1 Message Date
juhosg
2d874a31c7 ar71xx: add kernel support for the RB435G board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34239 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 10:18:01 +00:00
juhosg
74491b3b76 ar71xx: update PCI IRQ map for RB4xx devices
Should fix #12269.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 09:51:04 +00:00
juhosg
c7a8715a9c ar71xx: add kernel support for the OpenMesh MR600 board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 09:32:33 +00:00
juhosg
bb2ac88d1e ar71xx: add support for TP-Link TL-WA7510N
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:48:00 +00:00
juhosg
5758d2a8ee ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:23:27 +00:00
juhosg
fcc9edafeb ar71xx: don't use the unknown LED on the ZCN-1523-5 board
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 22:08:54 +00:00
juhosg
a93b2c2dcd ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 17:24:30 +00:00
juhosg
ca706d1e01 ar71xx: remove NO_AUTOINCR flag from the NAND drivers
The flag is not present in 3.6.
Also add compatibility patches for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28 12:21:15 +00:00
juhosg
c0ed64d3dd ar71xx: ag71xx: fix build_skb arguments for 3.6
Also add a compatibility patch for 3.3

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 17:11:06 +00:00
juhosg
1488bdd2d5 ar71xx: add support for the Senao CAP4200AG board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:38 +00:00
juhosg
5751fd8e2a ar71xx: use mtd_read in wrt160nl_part
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:58 +00:00
juhosg
584868a74e ar71xx: use mtd_read in tplinkpart
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:57 +00:00
juhosg
f194083091 ar71xx: rw2458n - fix flash parts
See #12338. Redwave rw2458 has uboot, not redboot.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-19 18:32:49 +00:00
juhosg
f2b2ff444e ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 18:27:47 +00:00
juhosg
83c1f2e1ef ar71xx: add a helper function for setting up ETH_CFG register on AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 18:27:45 +00:00
juhosg
fa44661b24 ar71xx: add support for the OpenMesh OM2P-HS board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 08:26:01 +00:00
juhosg
685e1a417d ar71xx: add support for the TL-WR841N/ND v8 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33621 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04 20:16:03 +00:00
juhosg
6d33dda889 ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 20:05:42 +00:00
juhosg
417602ac1e ar71xx: automatically find WLAN calibration data on TEW-673GRU
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:40 +00:00
juhosg
bb4a32bb81 ar71xx: automatically find WLAN calibration data on DIR-825-B1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:38 +00:00
juhosg
a7bf55a712 ar71xx: use different machtype and setup for the TL-MR3040
Should fix #12211. Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24 18:45:56 +00:00
juhosg
88d42e3e5a ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:55 +00:00
juhosg
52f5b88b84 ar71xx: ar934x_nfc: increase DMA retry count
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:54 +00:00
juhosg
5c9038f12e ar71xx: ar934x_nfc: optimize READOOB operation on large page devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:53 +00:00
juhosg
56caae5b72 ar71xx: ar934x_nfc: fix RNDOUT operation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:51 +00:00
juhosg
5cf642fa6f ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:50 +00:00
juhosg
e9a522de9e ar71xx: register the NAND controller device on the RB2011
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33388 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:26 +00:00
juhosg
39bdbbc7fc ar71xx: add device registration code for the AR934x NAND flash controller
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:25 +00:00
juhosg
ce47c98d07 ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:22 +00:00
juhosg
4b7be33ba5 ar71xx: add initial support for RB2011UAS-2HnD
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:32 +00:00
juhosg
25dbd4639c ar71xx: use routerboot_find_tag to find wlan data offset on RB751
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:30 +00:00
juhosg
d0d14675bb ar71xx: add RouterBoot related helper routines
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:28 +00:00
juhosg
4834938a89 ar71xx: define MTD partitions for RB2011
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:24 +00:00
juhosg
775e69dfac ar71xx: add preliminary support for Mikrotik RB2011L
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:22 +00:00
juhosg
527f8049cd ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:20 +00:00
juhosg
c4b6e540e4 ar71xx: add dynamic MDIO clock calculation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:17 +00:00
juhosg
3868d762d1 ar71xx: use the RLE library for RB751
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 17:51:56 +00:00
juhosg
311f77fe3e Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"
That was based on assumptions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:55 +00:00
juhosg
32b0679079 ar71xx: all0315n: fix ethernet according to vendor info
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:54 +00:00
juhosg
1631af0254 ar71xx: Buffalo WZR-HP-AG300H LED support
An improved LED support for Buffalo WZR-HP-AG300H.

There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.

[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:11:55 +00:00
juhosg
2065e21ba2 ar71xx: add support for the Allnet ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:31 +00:00
juhosg
aec6c8f610 ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:26 +00:00
juhosg
616abf736e ar71xx: add support for the TRENDnet TEW-712BR board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 20:09:13 +00:00
juhosg
e56ca07f84 ar71xx: fix comment style in mach-tl-wr2543n.c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 12:42:59 +00:00
juhosg
d27564d094 ar71xx: add ALL0305 board alias
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33224 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 12:33:22 +00:00
juhosg
1eb25d5c4f ar71xx: add support for TP-Link TL-WDR3600
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.

[juhosg: remove the custom machine type, change the board name instead]

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 09:43:18 +00:00
blogic
fdbde13d03 add led defintion for the WR2543 5GHz WLAN LED
Signed-off-by: Andy Leiserson <andy@leiserson.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 09:10:24 +00:00
juhosg
58aa6ee58f ar71xx: init switch hw_reset on the TL-WR1043ND board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 09:54:28 +00:00
juhosg
62dfbdafd5 ar71xx: ew-dorin: added router firmware generation
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:24:57 +00:00
juhosg
b80a2c45e4 ar71xx: Buffalo WLAE-AG300N initial support
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:24:52 +00:00