qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-27 17:55:55 +02:00
Code
24,957 Commits 13 Branches 0 Tags 117 MiB
be18534f21
Commit Graph

10205 Commits

Author SHA1 Message Date
florian
be18534f21 [kernel] 3.6: add some framebuffer related config symbols 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34207 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-16 13:00:51 +00:00
florian
0b12543150 [ar7] push atm, br2684ctl and kmod-pppoa down the DSL Profile 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34206 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-16 13:00:48 +00:00
hauke
02b6c7e64a brcm47xx: revert r33935: check for .ELF header in partition parser 
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE.
russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420.
With the patch the linux partition also contained the loader which is in the first 128KB.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34201 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-15 16:39:45 +00:00
juhosg
c222bbfd4e scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh 
It will be used for non OM2P boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34200 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-14 14:18:33 +00:00
juhosg
3ebd08390e ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board 
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34198 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 20:57:19 +00:00
juhosg
886f3be706 ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board 
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34197 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 20:57:18 +00:00
juhosg
f393ba5b3c ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device 
[juhosg:
  - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
  - wrap long lines in mach-ubnt-xm
  - remove default network config, set it from uci-defaults/network
    instead
  - remove user-space, and image generation stuff]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34196 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 20:57:17 +00:00
juhosg
f8b9d319cb ar71xx: add profiles and build images for old PowerCloud System devices 
[juhosg:
  - use 'PowerCloud Systems' instead of 'PCS' in the profiles
  - sort SingleProfile instances in image/Makefile]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34195 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 20:57:15 +00:00
juhosg
57684a794b generic: refresh 3.6 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34194 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 20:57:13 +00:00
florian
e4cd3e67f6 [malta] fix badly named patch file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34193 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 17:39:44 +00:00
florian
0bb5a2dd86 [malta] switch to kernel 3.6.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34192 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 17:20:19 +00:00
florian
5acec11941 [malta] fix CBUS UART registration 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34191 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 17:20:14 +00:00
juhosg
8543fd3e8f ar71xx: add profile and build image for the TL-WA7510N board 
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34190 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 14:48:03 +00:00
juhosg
1926c88986 ar71xx: user space support for the TL-WA7510N 
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34188 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 14:48:01 +00:00
juhosg
bb2ac88d1e ar71xx: add support for TP-Link TL-WA7510N 
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34187 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 14:48:00 +00:00
juhosg
aee63e385a ar71xx: refresh patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34186 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 14:47:58 +00:00
blogic
650f187f04 [lantiq] fixes ar9 / dgn3500 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34180 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 08:54:14 +00:00
blogic
ba2f185e06 [ramips] previous commit pushed 1 file too many ;) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34179 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 21:36:23 +00:00
blogic
127682ebab [ramips] move ethernet hw init to init/uninit functions 
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34177 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 21:35:01 +00:00
hauke
88e6c931a0 brcm47xx: remove double definition of kmod-tg3 added in r34150 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34176 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 21:34:00 +00:00
hauke
d4cf962eb9 brcm47xx: fix cfe config detection on WGT634U broken in r33920 
Thanks Russell Senior for reporting this.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34175 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 21:32:33 +00:00
luka
5f1dbcc46a cns3xxx: merge gpio patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34174 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 19:27:30 +00:00
luka
5c74071443 cns3xxx: fix build failure after r34168 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34173 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 19:27:29 +00:00
florian
edf444b665 [kernel] MIPS: add a build fix for arch/mips/boot/compressed/decompress.c 
And get rid of the AR7 patch because at least the Alchemy SoC also needs it

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34170 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 12:49:47 +00:00
kaloz
d5f52f466e [cns3xxx]: reorder, rename and refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34169 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 09:18:00 +00:00
kaloz
3b06668af5 [cns3xxx]: split spi patch, follow mainline file naming 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34168 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 08:22:14 +00:00
kaloz
50093aed33 [cns3xxx]: split the i2c patch, merge the retry fixup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34167 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 08:21:38 +00:00
blogic
99d46724d1 [atheros] move redboot boardconfig patch into target folder 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34166 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-12 07:56:37 +00:00
kaloz
c9c06656ce [ixp4xx:] add support for the Tonze AP-422/425 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 21:04:30 +00:00
kaloz
9e71e83d05 refresh patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34164 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 21:03:52 +00:00
kaloz
a47b8e3270 [cns3xxx]: generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34163 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 20:57:04 +00:00
luka
00f29ce9a4 cns3xxx: convert dwc_otg patches to files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 20:03:58 +00:00
luka
133d66da06 cns3xxx: convert ethernet patches to files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34161 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 20:03:56 +00:00
jogo
f9aaf2e1ab bcm63xx: switch to 3.6.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34160 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 19:57:17 +00:00
kaloz
06e73c8149 [ixp4xx]: move fixed mapping of internal devices into vmalloc region 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34158 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 19:29:27 +00:00
florian
6054f4542f [au1000] advertise squashfs feature 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34157 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 19:26:54 +00:00
florian
adf0ebdf2f [au1000] add support for Linux 3.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34156 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 19:26:50 +00:00
florian
2217c75c0f [au1000] split kernel config between generic, au1500 and au1550 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34155 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 19:26:44 +00:00
florian
e58dc6f93a [ar7] add support for Linux 3.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34154 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 18:41:09 +00:00
florian
cfe387e351 [ar7] move files directory to files-3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34153 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 18:40:48 +00:00
hauke
d82f4384d6 brcm47xx: remove ssb-gige package 
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34150 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 17:30:33 +00:00
florian
b5e39be3da [ar7] generate image for AC49x 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34149 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:39 +00:00
florian
942c29a052 [ar7] create AC49x subtarget 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34148 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:34 +00:00
florian
cdbc741abf [ar7] create generic subtarget 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34147 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:29 +00:00
florian
b8563c946c [ar7] detect AC49x flash partitions 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34146 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:22 +00:00
florian
b95ed4ea89 [ar7] support AC49x bootloader environment 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34145 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:14 +00:00
florian
ae5a6a7d59 [ar7] add AudioCodes AC49x platform support to kernel 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34144 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:09 +00:00
florian
078aa440fd [ar7] free memory below kernel offset 
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34143 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-11 16:11:00 +00:00
jow
f1ba8dbbc9 x86/generic: don't disable usbfs (#12452) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34139 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-10 23:28:58 +00:00
jogo
795c0046ce bcm63xx: fix compilation with kmod-ohci enabled with 3.6 
Fixes the following error:

drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34138 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-10 22:10:47 +00:00