florian
3072265237
[brcm63x] imagetag's -k argument is expected to be hexadecimal instead of decimal ( #4885 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-07 13:22:32 +00:00
florian
1c5b430f75
[brcm63xx] add the CFE offset command line option to the imagetag utility, closes ( #4366 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-16 12:29:11 +00:00
florian
de1e7c94c8
[brcm63xx] add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-12 08:54:04 +00:00
florian
68a5bde10c
[brcm63xx] add support for user9102 boards ( #4537 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-31 16:01:20 +00:00
florian
0ecc586d63
[brcm63xx] generate images for old CFE based boards like the Davolink DV201
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-29 14:56:45 +00:00
florian
6473465573
Build images for Inventel Livebox
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-12 15:16:57 +00:00
florian
ecf915ebc8
Fix typo, we are not building for the DG834G (ar7) but the DG834GT (brcm6348)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-10 23:57:23 +00:00
florian
43af26b163
Add support for Sagem F@ST2404 ( #4332 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-10 16:13:41 +00:00
florian
6489001dd8
Add support for bcm96348gw10 (Netgear DG834GT) ( #4319 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-07 20:34:48 +00:00
florian
e2da4e9b55
Generate valid images for the bcm96348gw board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-20 21:22:45 +00:00
florian
1d55b67ff9
This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. ( #4201 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-15 11:30:22 +00:00
florian
33ffd60e66
Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-20 12:55:28 +00:00
nbd
8a5477f586
bcm963xx: image generation using image tagger
...
This adds CFE tagged image generation in the BCM963xx target image Makefile.
It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi.
It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP,
which is based on a slightly older LZMA SDK. Anyways, some of the code is
GPL, some of it is LGPL, so it might be that Broadcom owes some sources.
Also, LZMA has a bug which causes it to generate different output when you
are using stdin / stdout compared to plain files. I've just worked around
the issue by using plain files.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:30:04 +00:00
nbd
bd6f055e6a
bcm963xx: fix load address / kernel entry
...
Current kernels have the same kernel entry as load address, so just set them
like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this
too.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:29:39 +00:00
nico
ab01217894
enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-09 17:08:51 +00:00
florian
4e758fef01
brcm63xx image generation cleanups ( #3169 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-01 21:10:47 +00:00
nbd
f56b55940b
make the image filenames a bit shorter
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-10 23:08:11 +00:00
nbd
17c7b6c3fd
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:27:37 +00:00
