qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 08:28:26 +02:00
Code
23,789 Commits 13 Branches 0 Tags 117 MiB
c94a6d0b71
Commit Graph

535 Commits

Author SHA1 Message Date
jogo
c94a6d0b71 bcm63xx: bcm63xx-spi does not depend on spi-bitbang 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32594 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:17 +00:00
jogo
4f860c88aa bcm63xx: 96348A-122 improvements (Comtrend 5365) 
1) Improve WLAN button.
2) Add 96348A-122 image.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:15 +00:00
jogo
c60cd5dd54 bcm63xx: fix second caldata address calculation 
thanks Noltari for spotting this.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32592 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:12 +00:00
jogo
cc1b8fb1cb bcm63xx: update patches to latest upstream versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32591 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:07 +00:00
florian
0ef855fc75 [brcm63xx] refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32581 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 09:45:46 +00:00
florian
a2ed4b34a3 [brcm63xx] fix watchdog and rng drivers section mismatch (#11767) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-29 09:07:54 +00:00
florian
a6f7f0aaf2 [brcm63xx] fix SPI clock frequency selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-27 22:14:50 +00:00
florian
4666e9b56d [brcm63xx] fix SPI message control handling for BCM6338/6348 
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32409 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-17 16:17:29 +00:00
jogo
d8ff69c0da bcm63xx: readd accidentially dropped ignore_oc in ehci driver 
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32221 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-11 22:24:58 +00:00
florian
816d0cbd39 [brcm63xx] fix 553-board_96348w3.patch patch wrt gpio-keys-polled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32096 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 20:58:45 +00:00
florian
d19ba29311 [brcm63xx] fix alarm led color for board 96348A-122 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32089 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 16:07:46 +00:00
florian
0e5685072e [brcm63xx] add 96348w3 board (#10764) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32088 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:45:04 +00:00
florian
84fcf0bb00 [brcm63xx] update livebox board support (#8677) 
Merge most fixes from #8677:

- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses

Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32087 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:44:56 +00:00
florian
adfadea95e [brcm63xx] fix leds naming for all bcm63xx boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32086 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:44:52 +00:00
florian
3d0fed711e [brcm63xx] backport upstream spi-bcm63xx fixes 
* message pump conversion
* not using stopping state
* setting spi driver mode bits

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32078 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 13:31:33 +00:00
florian
a7a19483fb [brcm63xx] increase led number in patch 301-led_count.patch 
So that board patches are only touching board-related code

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32076 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 13:31:24 +00:00
florian
6255930f93 [brcm63xx] fix board patches so that new boards are withing appropriate ifdef 
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32060 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 13:40:41 +00:00
florian
a6691cb6b1 [brcm63xx] fix bisectability of patch 303-spi-board-info.patch 
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32058 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 13:40:35 +00:00
blogic
466d98bf88 [kernel] bump to 3.3.8 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32055 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 06:57:51 +00:00
jogo
43bdeca579 bcm63xx: fix ethernet on 96328avng and 963281TAN 
The internal switch did not get registered.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32041 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-04 08:35:25 +00:00
jogo
f91824b22d bcm63xx: build images for 6328 reference boards with various flash sizes 
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-30 10:27:46 +00:00
jogo
99b853b6b3 bcm63xx: readd accidentially dropped network config for SPW303V 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-30 10:27:42 +00:00
jogo
878544bb07 bcm63xx: build images for DSL-274XB revision F1 
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:51 +00:00
jogo
092e90e1ef bcm63xx: add ath9k to atheros wifi profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:48 +00:00
jogo
f095146c5d bcm63xx: enable bcm6328 support and required drivers 
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:46 +00:00
jogo
cbdf1f350a bcm63xx: add support for DSL-274XB rev F1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:43 +00:00
jogo
5a482fc8b3 bcm63xx: fix port state after network down 
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:40 +00:00
jogo
0bdb7cbf98 bcm63xx: add a fixup for ath9k devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:37 +00:00
jogo
d1683ec919 bcm63xx: add support for the HSSPI controller 
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:33 +00:00
jogo
35f8e31243 bcm63xx: add preliminary support for bcm6328 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:29 +00:00
jogo
c9204063aa bcm63xx: add flash type detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:25 +00:00
jogo
fdbaed3349 bcm63xx: pad Speedport W303 V images to 4 MiB 
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:22 +00:00
jogo
34f9a0d745 bcm63xx: add a default switch configuration for DSL-274XB 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:17 +00:00
jogo
3df0e1587c bcm63xx: setup network config through uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:14 +00:00
jogo
acbbcb35b8 bcm63xx: move the board name workaround to /lib/brcm63xx.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:11 +00:00
jogo
2c54f4168e bcm63xx: use the exact board id as board identification string 
No need to keep the bcm63xx/ at the start or the chipid info at the end.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:08 +00:00
juhosg
530802ba69 kernel: update linux 3.3 to 3.3.7 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:32 +00:00
juhosg
5cc763c7b2 linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 10:58:52 +00:00
juhosg
298dcd23d1 kernel: update linux 3.3 to 3.3.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 09:18:32 +00:00
juhosg
fe2be6a9a3 kernel: update linux 3.3 to 3.3.5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 20:11:43 +00:00
jogo
35009bdf80 bcm63xx: fix a race between PCI bus scan and fallback sprom registration 
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.

Fixes #11384.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31638 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 21:25:34 +00:00
florian
a1c9b29340 [brcm63xx] use a define for the poll and debounce interval 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 15:40:26 +00:00
juhosg
e51f7c5d1b kernel: update linux 3.3 to 3.3.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 08:38:11 +00:00
florian
8812c9e533 [brcm63xx] switch to gpio-keys-polled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31491 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-27 16:44:48 +00:00
jogo
50d9e73cdf bcm63xx: drop linux 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31464 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 11:49:27 +00:00
jogo
7a0767fe77 bcm63xx: drop linux 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31463 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 11:49:24 +00:00
jogo
30f433f1b9 bcm63xx: switch kernel to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31462 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 11:49:19 +00:00
jogo
af89f0c95c bcm63xx: enable bcm6368 for linux 3.3 and build images 
Only build bcm6368 images when building for linux 3.3.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31133 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-28 20:42:37 +00:00
jogo
b8d5619ca8 bcm63xx: add initial support for bcm6368 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31132 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-28 20:42:34 +00:00
jogo
03e726c2ae bcm63xx: add driver for the internal hw trng on bcm6368 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31131 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-28 20:42:30 +00:00