* SiS 190 Fast/Gigabit Ethernet support
* SysKonnect Yukon support
* Atheros L2 Fast Ethernet support
* Atheros L1 Gigabit Ethernet support
* Atheros L1C
* Atheros L1E
Patch by Lauri Võsandi<lauri.vosandi@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27242 3c298f89-4303-0410-b956-a3cf2f4a3e73
Also disable rtc-core for now since this changed to a bool, now directly
used in the kernel if enabled.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27186 3c298f89-4303-0410-b956-a3cf2f4a3e73
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.
Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27037 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add missing config symbols
* Update package/kernel for 2.6.39
CONFIG_BT_L2CAP=y and CONFIG_BT_SCO=y are set to build them into the bluetooth module.
Thank you Jonas Gorski for the patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27010 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add a missing dependency to kmod-crypto-iv. chainiv.ko and eseqiv.ko
from kmod-crypto-iv depend on crypto_blkcipher.ko from
kmod-crypto-manager.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26984 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since the oldest kernel in trunk is 2.6.30 the modules always use the
newer names, so we can just use the _generic prefix directly.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26903 3c298f89-4303-0410-b956-a3cf2f4a3e73
There's only 2.6, so it doesn't make sense to mention modules that are
2.4 only or for modules that they are available only for 2.6.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26902 3c298f89-4303-0410-b956-a3cf2f4a3e73
With no 2.4 support in trunk, we can safely remove any 2.4 definitions for
kmods and merge the 2.6 definitions into the generic ones.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26901 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since there's only 2.6 in trunk $(KMOD_SUFFIX) can be safely replaced with
ko for all mainline kernel modules.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26900 3c298f89-4303-0410-b956-a3cf2f4a3e73
package/kernel/modules/other.mk is getting big enough that putting the LEDs stuff into its own file makes sense.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26868 3c298f89-4303-0410-b956-a3cf2f4a3e73
kmod-crypto-ipsec bundles some otherwise unprovided kernel crypto
modules that are useful for IPSEC. This is an alternative to breaking
these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng
(rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko).
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26814 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add kmod-crypto-iv as a dependency for kmod-ipsec. Also remove the
extraneous kmod-crypto-core dependency to eliminate recursion.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26813 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds kmod-crypto-wq, kmod-crypto-rng, and kmod-crypto-iv
packages. These packages provide some missing kernel crypto modules
which are required for IPSEC. The strongswan4, ipsec-tools, and possibly
other IPSEC packages do not work properly without these modules.
NOTE: The KCONFIG associated with each of these modules gets selected
whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these
modules are already being built.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26812 3c298f89-4303-0410-b956-a3cf2f4a3e73
For kernel versions newer then 2.6.31 the ext4 module can be used to mount
ext2/3 filesystems.
Building ext2/3 as modules on the other hand breaks using ext4 for mounting ext2
or ext3, which breaks booting from ext2/3 on machines where the ext4 module is
built into the kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26645 3c298f89-4303-0410-b956-a3cf2f4a3e73
btrfs needs zlib_deflate, which was built but not included
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26632 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Some module should be loaded later to load them after the modules they are depending on
* add some more missing config symbols
* make CS5535 build again
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26570 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add a bundle for including commonly useful modules for IPtables debugging and development.
For now, it just contains xt_TRACE.ko
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26567 3c298f89-4303-0410-b956-a3cf2f4a3e73
This enables support for Realtek 8169 based network cards for other
platforms than x86. I have a mini-PCI card on ixp4xxx running here.
Maybe for the other cards in netdevices.mk a @DEPENDS change from
@TARGET_x86 to @PCI_SUPPORT makes also sense.
Signed-off-by: Christoph König <christoph.koenig@ikt.uni-hannover.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26529 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since r26296 mppe.ko could not be loaded, kernel gives "device missing" error.
According to KConfig cypther-ecb is required.
Signed-off-by: Sven Roederer <mailinglists.sven_at_roederer.dhs.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26507 3c298f89-4303-0410-b956-a3cf2f4a3e73
Changed:
- Support added for mISDN card driver for Cologne AG's HFC pci cards (single port)
- Title texts and help texts for some other isdn drivers adjusted for clarification
Signed-off by: Arnold Schulz <arnysch@gmx.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26452 3c298f89-4303-0410-b956-a3cf2f4a3e73
Netfilter LED target triggers blinkenlichten when a network packet hits
a rule.
LED target requires iptables 1.4.9 or higher
Signed-off-by: Łukasz Stelmach <stlman@poczta.fm>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26451 3c298f89-4303-0410-b956-a3cf2f4a3e73
In some places LINUX_2_6_38 was just missing.
Some kernel modules were moved.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26239 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds kernelmodule for watchdog timer on platform orion.
Signed-off-by: Michael Kämmerer <mrk_at_h3c_._de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25620 3c298f89-4303-0410-b956-a3cf2f4a3e73
Enable build of kernel module for MOS7720 usb-serial devices.
Tested on WGT634U and WL500g running trunk @r24238.
Signed-off-by: Marc Zyngier <maz@misterjones.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25174 3c298f89-4303-0410-b956-a3cf2f4a3e73
We do not make a kernel module depend on user-space utility.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25035 3c298f89-4303-0410-b956-a3cf2f4a3e73
in general config. This effects the build in kmod-fs-ext4 and when it
is build into the kernel in the x86 target.
Thank you Philip Prindeville
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24951 3c298f89-4303-0410-b956-a3cf2f4a3e73
This adds the rtc-class and rtc-pcf8563 modules for the
real time clock used in the NBG460N/550N/550NH.
Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24420 3c298f89-4303-0410-b956-a3cf2f4a3e73
This package is needed by kmod-usb-serial-option
Thank you raver (closes#7731)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24271 3c298f89-4303-0410-b956-a3cf2f4a3e73
l2tp-ip and l2tp-eth should depend on l2tp_netlink
fix pppol2tp for kernel >= 2.6.35
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23993 3c298f89-4303-0410-b956-a3cf2f4a3e73
hermes now depends on cfg80211 and that is provided by compat-wireless, so the hermes driver should also be taken from that source.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23946 3c298f89-4303-0410-b956-a3cf2f4a3e73
kmod-sound-i8x0 fails to include the ac97 modules and misspells the
module name in AutoLoad.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23283 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds support for configuring kirkwood/orion i2c module.
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23215 3c298f89-4303-0410-b956-a3cf2f4a3e73
hw-crypto modules depend on CONFIG_CRYPTO_HW beeing set. Instead of selecting
CONFIG_CRYPTO_HW from each crypto module let it be selected by crypto core.
It only opens the submenu for hw-crypto devices and does not generate any overhead.
Patch by Jan Willies
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23190 3c298f89-4303-0410-b956-a3cf2f4a3e73
Modinfo for solos-pci tells us that it has a dependency on "atm", but this isn't
captured in the Makefile.
Signed-off-by: Philip A. Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23086 3c298f89-4303-0410-b956-a3cf2f4a3e73
This driver is used by Traverse Technologies' Geos ADSL2+ x86 router:
http://www.traverse.com.au/productview.php?product_id=117
Signed-off-by: Nathan Williams <nathan@traverse.com.au>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23070 3c298f89-4303-0410-b956-a3cf2f4a3e73
Make the VirtIO modules depend on the new x86_kvm_guest subtarget.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22945 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add support for VirtIO-based paravirtualized devices used by various
virtualization platforms.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22943 3c298f89-4303-0410-b956-a3cf2f4a3e73
This adds a new kmod-sctp option that enables support of SCTP in 2.6x
kernels.
The patch also contains a small cleanup in the dependencies.
Signed-off-by: Sebastien Decugis <sdecugis@nict.go.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22917 3c298f89-4303-0410-b956-a3cf2f4a3e73
