jow
52e77b9e47
[backfire] merge r20722
...
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@20723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-05 23:06:36 +00:00
nbd
bc3d4f5dfd
enable IP175A support in the IP175C PHY driver (based on patch from jh in #6733 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28 18:57:42 +00:00
nbd
02c404ea21
ar8216: fix the mtu register definition
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 21:43:16 +00:00
nbd
455e74f063
Several small fixes for ar8216 driver (patch by Jonas Gorski)
...
* Create defines for some magic values/masks.
* Change vlan_id to u16, to allow VIDs > 255.
* Add a range check to set_pvid as it isn't a VID, but the index
in the vlan table.
* Set the max VID to 4094, since 4095 is a reserved value and
should not be used.
* In mangle_rx replace the provided VID with the VID of the table
entry of the port, not the index of the table.
* In hw_apply, remove a redundant emptyness check (was already
checked several lines above).
* In no vlan mode do not set the ingress mode to secure, as there
are no vlan table entries, but to use the port's destination
masks. Otherwise the switch won't forward anything.
* In read_status tell that the phy is up (taken from the rtl8306
driver).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 14:35:41 +00:00
juhosg
a5af4ae7d5
kernel: add driver for the RTL8366RB switch
...
Thanks to Andrew Tarabaras.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24 13:39:02 +00:00
juhosg
2c16cf4acb
kernel: fix typos in the AR8216 header file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24 13:38:48 +00:00
juhosg
48e652dc63
rtl8366_smi: sanitize gpio values to a 0/1 boolean
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:12 +00:00
juhosg
8a3eb00804
rtl8366s: reset the chip early, this allows ethernet to work as soon as possible
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-27 21:01:48 +00:00
juhosg
d7d76ebff9
rtl8366: make it available on all platforms
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25 15:13:38 +00:00
nbd
00ebe9d87a
rtl8306: manage the wan port as a separate phy device with proper link status reading and autonegotiation - the genphy driver does not handle it properly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-09 03:25:33 +00:00
nbd
1b18fb38dc
ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection ( #6309 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08 14:06:18 +00:00
nbd
b9c2e351d5
fix link status detection in various switch drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08 14:06:09 +00:00
nbd
8bdac63e6f
move the updated version (for 2.6.30+) of ar8216/mvswitch to the generic files directory and remove patches for older kernel versions (no longer in use)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-16 12:24:46 +00:00
nbd
1881cb34ec
add a driver for rtl8306 switches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-14 00:52:17 +00:00
nbd
71f5d93ef9
ar8216: rename the vlan attribute to enable_vlan to keep it consistent with other drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-11 01:21:01 +00:00
nbd
109963bd6d
ar8216: fix transmission of large frames by setting the switch mtu
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-29 21:54:16 +00:00
nbd
66fc7bca04
ar8216: add delay for page switching to work around register setting corruption. use packet mangling to fix up the vlan for incoming packets (workaround for hardware bug, which renders normal 802.1q support unusable)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-14 03:32:01 +00:00
nbd
887ce09dca
fix a crash in ip175c attribute enumeration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30 13:57:22 +00:00
nbd
681d7f126b
Add a driver for Atheros AR8216 switches
...
Thanks to Vertical Communications, Inc. for providing access to the documentation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-29 13:02:41 +00:00
nbd
b645d7df22
swconfig: add a generic switch reset call
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-28 19:16:17 +00:00
nbd
dfce366310
clean up the ip175c driver some more, add support for setting the pvid and fix querying the phy status
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 21:26:44 +00:00
nbd
52196955df
swconfig: add a generic method for setting the port primary vlan id (used for transparently fixing up pvid for untagged port when setting vlan ports)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 21:26:39 +00:00
nbd
fd1e16f560
add IC+ IP175C driver (based on Patrick Horn's driver, see #4050 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 18:57:55 +00:00
nbd
3a49788081
swconfig: treat struct switch_attr as constant
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 18:57:36 +00:00
nbd
18920f62de
swconfig: remove old debugging stuff
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 18:57:30 +00:00
nbd
8e028d3df0
mvswitch: re-enable header mode
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-10 11:33:49 +00:00
nbd
6623e9fd70
atheros: in later kernels, vlan 0 no longer works as expected, switch to (1,2) instead of (0,1) for lan/wan
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22 20:19:23 +00:00
nbd
a285220c58
mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22 20:18:36 +00:00
nbd
594d20c1a4
improve routing/nat performance for devices using the marvell 88e6060 switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-28 17:54:22 +00:00
nbd
79670e1e13
change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-18 21:43:30 +00:00
nbd
2b0ba098c0
add missing defines for mvswitch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21 18:12:38 +00:00
nbd
1274eb90e0
some more mvswitch fixes:
...
- initialize the vlan destination map properly
- workaround for moving node bug: clear the ATU database on every PHY poll
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-19 23:09:56 +00:00
nbd
15333144ce
add extra safety for the packet mangling in the mvswitch driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-19 23:09:43 +00:00
nbd
523804cb7c
set marvell switch ATU ageing time to minimum instead of maximum - hopefully fixes some fonera 2.0 ethernet issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09 10:31:46 +00:00
nbd
b84c7cd55b
enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header instead of a proprietary trailer) - fixes some mtu issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-29 12:55:44 +00:00
nbd
0f2df09b10
allow bigger packets in the marvell switch (does not fix the mtu problems yet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-28 21:59:06 +00:00
nbd
7bd818a6e3
fix vlan mapping for cpu port on the marvell switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-24 01:09:47 +00:00
nbd
f12451cca6
clear VLANTunnel bit on the marvell switch ports - should help with some bridging issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-23 16:28:05 +00:00
nbd
79f8984b04
Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ and the upcoming Fonera 2.0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20 08:29:01 +00:00
nbd
6598df69d1
Add stub driver for ADM6996F switches (configured through MII)
...
The driver currently uses a hardcoded VLAN mapping and has no configuration yet
Tested on Accton MR3202a
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20 02:53:04 +00:00