nbd
dd88c880ed
bcm963xx: serial port support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:30:49 +00:00
nbd
0fcb7c5182
bcm963xx: board support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:30:39 +00:00
nbd
baeea7e3b7
bcm963xx: add 2.6.25 configuration file
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:30:30 +00:00
nbd
61b272ab98
bcm963xx: use the 2.6.25.1 kernel
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:30:16 +00:00
nbd
8a5477f586
bcm963xx: image generation using image tagger
...
This adds CFE tagged image generation in the BCM963xx target image Makefile.
It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi.
It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP,
which is based on a slightly older LZMA SDK. Anyways, some of the code is
GPL, some of it is LGPL, so it might be that Broadcom owes some sources.
Also, LZMA has a bug which causes it to generate different output when you
are using stdin / stdout compared to plain files. I've just worked around
the issue by using plain files.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:30:04 +00:00
nbd
bd6f055e6a
bcm963xx: fix load address / kernel entry
...
Current kernels have the same kernel entry as load address, so just set them
like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this
too.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:29:39 +00:00
nico
ab01217894
enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-09 17:08:51 +00:00
kaloz
294a4bb95f
upgrade to 2.6.24.5
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-28 10:23:36 +00:00
nico
112eacc155
properly disable CONFIG_CRYPTO_HW
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-27 12:31:50 +00:00
florian
829e3cf764
Delete config-default file and resync kernel configuration for brcm63xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-11 14:22:41 +00:00
florian
4e758fef01
brcm63xx image generation cleanups ( #3169 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-01 21:10:47 +00:00
florian
d4e976a36f
Upgrade brcm63xx to 2.6.24
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-13 17:31:17 +00:00
juhosg
9c8f7fda46
[brcm63xx] resync kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-11 15:28:45 +00:00
kaloz
41ac39db86
upgrade & standardize kernel versions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-11 10:50:40 +00:00
nbd
6a049752cc
fix initramfs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-01 21:38:06 +00:00
nbd
f56b55940b
make the image filenames a bit shorter
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-10 23:08:11 +00:00
nico
2cd399391e
move crypto support to a seperate crypto.mk file, split modules into multiple packages and adjust dependencies, sync crypto options in kconfigs.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-23 15:12:12 +00:00
nico
937629f197
add missing 2.6 conntrack/nat helpers, add 2.6 conntrack/nat helper for RTSP ( closes : #2297 , thanks to aorlinsk), sync 2.4 / 2.6 kconfigs.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-22 18:37:24 +00:00
nbd
de5584e77a
clean up jffs2 config options
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-19 20:58:16 +00:00
nbd
ceee90ffd2
adapt profiles for subtarget changes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 20:04:43 +00:00
nbd
6db7ad74f6
major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 19:55:42 +00:00
nbd
17c7b6c3fd
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:27:37 +00:00
