qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-26 00:05:31 +02:00
Code
22,398 Commits 13 Branches 0 Tags 117 MiB
d25d480741
Commit Graph

8504 Commits

Author SHA1 Message Date
blogic
6aa1eddee7 [lantiq] generate uboot environment data in target 
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30537 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 19:07:11 +00:00
blogic
f1215ac7aa [lantiq] fix compile error in previous commit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 19:07:05 +00:00
blogic
61b8a7cdc6 [lantiq] Support booting the Speedport W502V using BRN-BOOT. 
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:48:04 +00:00
juhosg
d54a0c39e1 ramips: extract eeprom for the PCIe wlan module on the RT-N56U 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:45 +00:00
juhosg
073aa05f36 ramips: rt3883: enable PCI on the RT-N56U board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:44 +00:00
juhosg
0dad89e259 ramips: rt3883: add PCI support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:42 +00:00
juhosg
34acde8e5f ramips: rt3883: sync 2.6.39 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:41 +00:00
juhosg
5775cc2b9c ramips: use SoC specific irq.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:40 +00:00
blogic
13595a7a28 [lantiq] fixes irq locking in ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 15:05:58 +00:00
blogic
d4d4e1aa21 [lantiq] fixes gpio_export patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 15:05:57 +00:00
blogic
f8d8046b51 [ltq-dsl] add annex selection support to ltq_dsl package 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 15:05:49 +00:00
juhosg
3c97dc485a ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 17:11:58 +00:00
juhosg
a433c026e5 ar71xx: add model detection for TL-WR842N/ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 17:11:57 +00:00
florian
8ac28fce23 [malta] update to 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30503 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 16:05:30 +00:00
florian
3e65a7b3dd [ar7] fix titan gpio register size 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30502 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 16:05:27 +00:00
juhosg
e95d1bebf7 ramips: rt3883: update package list in the default profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30499 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:18:05 +00:00
juhosg
2223374185 ramips: add preliminary support for the Asus RT-N56U board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:18:04 +00:00
juhosg
10a983eea1 ramips: raeth: enable MDIO code for RT3883 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30497 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:18:03 +00:00
juhosg
07c8d27309 ramips: add preliminary support for the RT3662/RT3883 SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:17:59 +00:00
florian
17d0a31e9d [malta] add support for 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30492 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 12:36:34 +00:00
hauke
adf8b5a51f brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30488 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 22:41:20 +00:00
hauke
e1a53dd6b0 brcm47xx: activate config bug to show warnings 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30487 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 22:40:01 +00:00
juhosg
71da0d9534 ramips: use GENERIC_{4,8}M image template for WR5123GN 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30483 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 18:04:47 +00:00
juhosg
85b1ee0e18 ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30482 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 18:04:46 +00:00
hauke
1b56ff8998 brcm47xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30481 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 16:45:27 +00:00
hauke
6d7798dc01 brcm47xx: update usb driver for brcm47xx. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30480 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 16:38:10 +00:00
juhosg
dd584f3173 ramips: add initial support for 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30476 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 12:52:14 +00:00
juhosg
c9a5f3f810 ramips: include 'linux/module.h' in the ramips_spi driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30475 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 12:52:13 +00:00
juhosg
4c24144f1f ramips: rt288x: remove per-board physmap_flash_data instances 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30474 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 12:52:12 +00:00
juhosg
40c07f37d9 ramips: rt305x: remove per-board physmap_flash_data instances 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 12:52:10 +00:00
kaloz
9701922238 [cns3xxx]: enable another l2 cache errate on newer kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30472 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-12 11:22:08 +00:00
juhosg
129f9cacb9 ramips: load gpio-polled keys module 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30463 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 20:37:34 +00:00
juhosg
e24fe32095 ramips: remove yet another CONFIG_MTD_PARTITION ifdef 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30462 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 19:37:11 +00:00
juhosg
d33e1ea7fd ramips: use gpio-keys-polled instead of gpio-buttons 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30461 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 19:37:06 +00:00
kaloz
1e4941a025 [generic/3.3]: add some missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30460 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 18:38:28 +00:00
juhosg
baa5c31303 ramips: add MIPS platform file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30459 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 18:16:11 +00:00
juhosg
8aed6bf98c generic/2.6.39: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 18:16:08 +00:00
kaloz
06d33a010d [generic/3.3]: refresh patches to -rc3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30456 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 17:43:06 +00:00
juhosg
a6fcd662b4 ramips: add MDIO bus support for RT288X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 16:49:56 +00:00
kaloz
c6114b60db [cns3xxx]: rename 3.1 patches directory as it will be used for newer kernels as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 15:59:23 +00:00
kaloz
63815e7b5d [cns3xxx]: rename 2.6.39 patches directory 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30453 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 15:58:14 +00:00
juhosg
3613a73356 ramips: fix Belkin F5D8235-v2 VLAN setup 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30452 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 15:31:18 +00:00
juhosg
3120faed8b ramips: raeth: make debugging messages configurable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 15:12:10 +00:00
juhosg
ad0b8c49bf ramips: raeth: use device pointer in DMA API calls 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30449 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 15:12:08 +00:00
juhosg
5b41176cdc ramips: raeth: add netdev pointer to private structure 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30448 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 15:12:06 +00:00
juhosg
1e38789510 ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 15:12:05 +00:00
juhosg
9b2ee01ff5 ramips: raeth: unmap rx DMA address in ramips_cleanup_dma 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 15:12:04 +00:00
juhosg
606588b4e9 ramips: raeth: add rx_dma array to store the DMA address of the rx packets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30445 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 15:12:02 +00:00
juhosg
bbc71f5154 ramips: raeth: use dma_addr_t for the descriptors 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 15:12:01 +00:00
juhosg
cce4c079c4 ramips: raeth: unmap DMA memory when a packet is received 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30443 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-11 15:11:56 +00:00