1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-31 00:44:35 +02:00
Commit Graph

48 Commits

Author SHA1 Message Date
juhosg
d69d16fbbd ramips: rt305x: merge duplicated mac address setup
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:34 +00:00
juhosg
57ffcdaccd ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 10:44:23 +00:00
juhosg
64435afc83 ramips: add user-space support for ALL0256N
This adds uci-defaults and sysupgrade support for the ALL0256N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 11:48:47 +00:00
juhosg
20d9fd2c16 ramips: scripts updates
In this patch:

* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
  defined as usb led earlier, just in wrong place) - it should have
  router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
  default and the led is hidden also but if you are going to solder
  the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-23 10:23:32 +00:00
juhosg
608335c636 ramips fix f5d8235-v1 diag LED support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29857 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 18:11:39 +00:00
juhosg
a40700d373 ramips: add sysled and sysupgrade to wr512-3gn
Patch from #10035.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:43:23 +00:00
juhosg
c1be681672 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28 08:43:43 +00:00
juhosg
0cbcd33f32 ramips: rt305x: add support for the ALFA Networks W502U (R36) board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28 08:43:32 +00:00
juhosg
66769bfe50 ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27 16:56:30 +00:00
juhosg
b95eb02775 ramips: initial support for Sitecom WL-351 v1 002
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:16 +00:00
juhosg
a46cfc6bcc ramips: add support for the Senao/EnGenius ESR-9753 board
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:10 +00:00
juhosg
2b913567e8 ramips: add support for Omnima MiniEMBWiFi board
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:51:26 +00:00
juhosg
9de4cb5314 ramips: fix mac addresses on the DIR-300/600 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 20:06:08 +00:00
juhosg
6f27fcc4b0 ramips: set mac addresses for the NBG-419N
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:07 +00:00
juhosg
e595553be8 ramips: move ramips_get_mac_* functions to lib/ramips.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:03 +00:00
juhosg
5db41b5518 ramips: add ramips_ prefix to get_mac_{binary,nvram} functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:02 +00:00
juhosg
8b0e381068 ramips: fix network configuration setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 16:54:48 +00:00
juhosg
3c681484c2 ramips: setup default network configuration for RT-N15
Based on a patch by Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:54 +00:00
juhosg
52d2b347d2 ramips: remove default network configuration, and generate that from uci-defaults
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:51 +00:00
juhosg
a0f4e5c8de ramips: use /lib/functions/uci-defaults.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:48 +00:00
juhosg
0c608fa18a ramips: simplify uci-defaults/network script
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:45 +00:00
juhosg
a77cc3e6c0 ramips: setup mac and network interfaces from separate functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:43 +00:00
juhosg
fc0b7d945e ramips: Sparklan wcr-150gn board fixes
* Fix partition sizes.
 * Add buttons and leds.
 * Register usb.
 * Remove unnecessary stuff from image Makefile
 * Fix rt2x00 eeprom extract.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:41 +00:00
juhosg
1fe43c4a68 ramips: setup bc2 mac addresses from the generic network script
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29377 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:37 +00:00
juhosg
f9f721e5ba ramips: combine network setup for all boards in one file
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.

[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:35 +00:00
juhosg
ab4232bf2d ramips: Support for NexAira BC2
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:49:36 +00:00
juhosg
0f217d1398 ramips: combine led setup for all boards in one file
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:49:31 +00:00
juhosg
fbf0dc1df6 ramips: rt305x: add support for the ZyXEL NBG-419N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-22 20:41:49 +00:00
juhosg
2d61da5a90 ramips: rt305x: support for wr512-3gn-like routers
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28052 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-19 15:55:10 +00:00
juhosg
094c8b4e78 ramips: fix wireless on Belkin F5D8235 v2
Fix wireless firmware extract from flash for Belkin F5D8235 v2.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28050 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-19 15:55:07 +00:00
juhosg
36991e8520 ramips: use maccalc instead of hexdump + sed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-15 19:00:23 +00:00
juhosg
f64a3c8610 ramips: rt305x: fix mac addresses on the Netcore NW718 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-15 18:55:53 +00:00
juhosg
4a471f8a39 ramips: add uci-defaults scripts to preconfigure USB LEDs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-15 14:12:00 +00:00
juhosg
ef3572bede ramips: add support for Argus ATP-52B
[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-15 14:11:45 +00:00
juhosg
ea7f49d513 ramips: rt305x: add support for the Netcore NW718 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:32 +00:00
juhosg
793574f571 ramips: rt305x: add support for the Asus RT-G32 B1 board
Based on a patch by: Sergiy <piratfm@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:30 +00:00
juhosg
2ba08ae27e ramips: rt305x: add support for the DIR-600 B1,B2 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:24 +00:00
juhosg
8583804fdd ramips: rt305x: rename LEDs on the DIR-300-B1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:21 +00:00
juhosg
4a7f515821 ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards
This change corrects expected CPU name of Ralink RT3050, which
describes itself as RT3350 (this name is ripped off chip and elevated
to user space via /proc/cpuinfo.)
This patch fixes wired network on DIR-300 rev B and DIR-600 rev B

Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 10:56:18 +00:00
juhosg
b016341cf1 ramips: add diag support for RT-N15 and PWH2004
Also sort the board names alphabetically.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06 08:05:00 +00:00
juhosg
6451badb13 ramips: use the 'router' LED for diagnostic on the WHR-G300N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06 08:04:55 +00:00
juhosg
a728a666aa ramips: add hotplug script to extract eeprom for the rt2x00 driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:02:01 +00:00
juhosg
bb8dd176cc ramips: initial board support for MOFI3500-3GN
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG).  This
router is basically the NA version of the HW550-3G.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-04 08:43:07 +00:00
juhosg
4d41fe6013 ramips: add sysupgrade and status LED support for HW550-3G
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:40 +00:00
nbd
574f469e14 base-files: use shutdown instead of stop when the system goes down (patch by tripolar)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-13 08:01:21 +00:00
juhosg
a635a19c37 ramips: add diag support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20799 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 17:47:23 +00:00
blogic
4f3a09388f [ramips] adds ethernet driver, esw needs to be moved to swconfig, driver is missing rt288x support, not a platform device yet
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-23 16:51:51 +00:00
juhosg
b887a6d197 [ramips] initial support for RT288x/RT305x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-30 19:15:51 +00:00