kaloz
|
4d759b723b
|
[ixp4xx]: add 3.0 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27493 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 13:03:38 +00:00 |
|
kaloz
|
882adee49e
|
refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27492 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 12:57:51 +00:00 |
|
kaloz
|
23fde26a5c
|
[generic]: fixup mtd refresh and co.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27491 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 12:55:21 +00:00 |
|
kaloz
|
146c7d6f10
|
[generic/3.0]: fix myloader patch, thanks KanjiMonster
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27490 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 12:48:17 +00:00 |
|
blogic
|
bf7b45f818
|
fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27489 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 10:36:56 +00:00 |
|
kaloz
|
299fdf65d5
|
[cns3xxx]: we have an up-to-date mach-type file now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27486 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 10:12:50 +00:00 |
|
kaloz
|
b936a9b656
|
[generic/3.0]: replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27485 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 10:09:15 +00:00 |
|
florian
|
d8a46ca40e
|
[brcm63xx] move board_HW553 inside the ifdef ..BCM6358 .. endif block
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27484 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 10:00:39 +00:00 |
|
florian
|
f98de2585b
|
[kernel] refresh 2.6.39 geode patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27483 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 10:00:05 +00:00 |
|
juhosg
|
b016341cf1
|
ramips: add diag support for RT-N15 and PWH2004
Also sort the board names alphabetically.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27478 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 08:05:00 +00:00 |
|
juhosg
|
6451badb13
|
ramips: use the 'router' LED for diagnostic on the WHR-G300N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27477 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 08:04:55 +00:00 |
|
juhosg
|
eaafa6fa91
|
ramips: create tftp image for the WHR-G300N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27476 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 08:04:54 +00:00 |
|
juhosg
|
c96ab0c002
|
ramips: create factory image for the WHR-G300N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27474 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 08:04:52 +00:00 |
|
cshore
|
da0ae64a3e
|
[brcm63xx] Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27471 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 06:35:24 +00:00 |
|
cshore
|
e6ee47fd40
|
[brcm63xx] profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27470 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-06 06:35:22 +00:00 |
|
kaloz
|
b3f665b919
|
[generic/3.0]: add some symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27464 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-05 21:19:57 +00:00 |
|
florian
|
bc9fd85f57
|
[kernel] sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27457 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-05 12:40:50 +00:00 |
|
kaloz
|
458e5861cd
|
[target/generic/3.0]: add missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27454 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-05 11:55:31 +00:00 |
|
florian
|
b18307a84f
|
[brcm63xx] hw553: fix missing has_uart0 in board definition (#9533)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27448 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-04 15:04:58 +00:00 |
|
juhosg
|
ff21374f6a
|
ar71xx: fix building of squashfs images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27446 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-04 12:10:03 +00:00 |
|
blogic
|
8f9d825f9d
|
set DEFAULT_SUBTARGET for lantiq/
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27445 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-04 11:21:47 +00:00 |
|
blogic
|
e8f1fadf6c
|
fix broken falcon patches from last night
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27441 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-04 07:50:34 +00:00 |
|
juhosg
|
f3959aee0f
|
ramips: create factory image for DIR-300-B1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27439 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-04 06:48:45 +00:00 |
|
nbd
|
56e7a18c3e
|
ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27434 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-04 03:03:34 +00:00 |
|
blogic
|
e6839c59a8
|
AT91: flexibity: add system uci file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27413 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 18:55:57 +00:00 |
|
blogic
|
c7f2977365
|
AT91: Add flexibity board support
The patch below adds AT91 Flexibity Connect board support.
Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27412 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 18:51:59 +00:00 |
|
blogic
|
2b398e6998
|
alix2: add/subtract features as needed
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27411 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 17:39:24 +00:00 |
|
blogic
|
0820b56c69
|
use netif_receive_skb on lantiq
Signed-off-by: Luca Olivetti <luca@ventoso.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27410 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 17:39:05 +00:00 |
|
blogic
|
b75766abf4
|
automatic subtarget enumaration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27407 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 17:38:23 +00:00 |
|
blogic
|
dde03ff97a
|
update lantiq/falcon patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27406 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 17:38:11 +00:00 |
|
blogic
|
a6916ee356
|
fix description for lantiq target
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27405 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 17:37:57 +00:00 |
|
juhosg
|
f2053cb231
|
ramips: merge 2.6.39 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27399 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:02:10 +00:00 |
|
juhosg
|
e98854a51f
|
ramips: remove 2.6.37 stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27398 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:02:09 +00:00 |
|
juhosg
|
748af8b575
|
ramips: switch to 2.6.39.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27397 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:02:07 +00:00 |
|
juhosg
|
f7ed0bfe29
|
ramips: add 2.6.39 support
Based on the patches from #9625
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27396 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:02:06 +00:00 |
|
juhosg
|
a728a666aa
|
ramips: add hotplug script to extract eeprom for the rt2x00 driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27393 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:02:01 +00:00 |
|
juhosg
|
88b8c44b87
|
ramips: specify eeprom file name on RT305X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27392 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:02:00 +00:00 |
|
juhosg
|
556577659d
|
ramips: specify eeprom file name on RT288X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27391 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:59 +00:00 |
|
juhosg
|
5f4dbbbf5c
|
generic: add rt2x00_platform.h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27390 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:57 +00:00 |
|
juhosg
|
a6e5da490d
|
ramips: add all supported boards to lib/ramips.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27389 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:56 +00:00 |
|
juhosg
|
f9e19ce202
|
ramips: check the size of the uImage in image generation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27388 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:55 +00:00 |
|
juhosg
|
cf68680797
|
ramips: use lowercase partiion names on the WCR150GN board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27387 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:53 +00:00 |
|
juhosg
|
f1d6b8e6a9
|
ramips: use different partition names in the DIR-300-B1 image
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27386 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:52 +00:00 |
|
juhosg
|
a46ef02052
|
ramips: force word write on flashes with AMD cmdset (#9252)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27385 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:51 +00:00 |
|
juhosg
|
db3a7e64a2
|
ramips: update partition map for DIR-300-B1
Patch by Layne Edwards from #9252.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27384 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:49 +00:00 |
|
juhosg
|
f65d6ac4d9
|
ramips: consistently use 'firmware' name for sysupgrade partitions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27383 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:48 +00:00 |
|
juhosg
|
45b5e79de8
|
ramips: fix a section mismatch warning
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27382 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:46 +00:00 |
|
juhosg
|
17d001231c
|
ramips: remove unused include from the common GPIO code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27381 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:44 +00:00 |
|
juhosg
|
9589c35dd3
|
ramips: disable watchdog on sysupgrade
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27380 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:43 +00:00 |
|
juhosg
|
7807b0552e
|
ramips: swap target check in image generation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27379 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2011-07-03 15:01:42 +00:00 |
|